EA-410 (E01904001001 - E01904999999) Echo Auger - Overview
Sections of the EA-410
[Viewing 14 of 14]_WW_1.gif "Page A Diagram and Parts List for E01904001001 - E01904999999 Echo Auger")
_WW_2.gif "Page B Diagram and Parts List for E01904001001 - E01904999999 Echo Auger")
_WW_3.gif "Page C Diagram and Parts List for E01904001001 - E01904999999 Echo Auger")
_WW_4.gif "Page D Diagram and Parts List for E01904001001 - E01904999999 Echo Auger")
_WW_5.gif "Page E Diagram and Parts List for E01904001001 - E01904999999 Echo Auger")
_WW_6.gif "Page F Diagram and Parts List for E01904001001 - E01904999999 Echo Auger")
_WW_7.gif "Page G Diagram and Parts List for E01904001001 - E01904999999 Echo Auger")
_WW_8.gif "Page H Diagram and Parts List for E01904001001 - E01904999999 Echo Auger")
_WW_9.gif "Page I Diagram and Parts List for E01904001001 - E01904999999 Echo Auger")
_WW_10.gif "Page J Diagram and Parts List for E01904001001 - E01904999999 Echo Auger")
_WW_11.gif "Page K Diagram and Parts List for E01904001001 - E01904999999 Echo Auger")
_WW_12.gif "Page L Diagram and Parts List for E01904001001 - E01904999999 Echo Auger")
_WW_13.gif "Page M Diagram and Parts List for E01904001001 - E01904999999 Echo Auger")
_WW_19.gif "Page N Diagram and Parts List for E01904001001 - E01904999999 Echo Auger")
Keep searches simple, eg. "belt" or "pump".
Fuel Tank Vent
PartSelect #: PS9183121
Manufacturer #: A356000031
This a a genuine OEM replacement check valve for your small engine. It is also known as a fuel tank vent. You may need to replace this part if you are noticing debris or dirty oil in the reservoir. Ma...
$7.63
In Stock
Purge Bulb
PartSelect #: PS8857246
Manufacturer #: 12318139130
This OEM replacement part is used to pump fuel from the tank to the carburetor in order to start the engine. It may also be referred to as a Primer Bulb. It is made of durable black plastic and is sol...
$6.81
In Stock
Filter, Fuel
PartSelect #: PS11826309
Manufacturer #: A369000460
The Fuel Filter is a white and silver, individually sold, steel part. It reuires pliers to install and its installation is rated as Easy.
The part attaches inside of the fuel tank and is used to cle...
$8.60
Special Order
Spark Arrester Screen
PartSelect #: PS8867212
Manufacturer #: 14586240630
Also referred to as a Spark Arrester, this Spark Arrester Screen is an authentic OEM replacement part that is not part of a kit or assembly. It is made of metal and sold individually. The purpose of t...
$5.19
In Stock
Clip
PartSelect #: PS10053748
Manufacturer #: V490001230
Used in over 150 models of outdoor power equipment, this clip is commonly used to clip fuel lines or other hoses/tubes in place. It is sold individually, not as part of a kit or assembly, made of meta...
$4.99
In Stock
Nut 5
PartSelect #: PS9148697
Manufacturer #: 90050000005
This OEM nut is a 5mm, gold, metal nut, which is sold individually. It can be installed with a Wrench or Socket and Torque Wrench by torquing to the manufacturer specifications. This nut is used to se...
$4.99
In Stock
Wrench
PartSelect #: PS11826141
Manufacturer #: 89541039132
Made specifically for repairs done on handheld lawn and garden equipment, this OEM wrench is silver and made of durable metal. It is sold individually.
This wrench is sourced directly from the manuf...
$3.99
In Stock
Questions And Answers for EA-410
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replace clogged fuel filter.
Thru fuel cap, insert copper wire with hook formed on end. Fish around until you grab the fuel line. Pull the fuel line and filter thru the fuel fill neck.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Parts Used:
-
Keith from NORWOOD, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
22 of 37 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bulb was worn out and broken open
The unit is a press fit. To remove the old one required breaking the plastic compression tabs that hold it in place. That was simple enough. Replacing requires lining up in the correct position to meet the inner hose. Then push it in. The compression tabs on the replacement click in and hold.in place.
Parts Used:
-
Richard from SPRING HILL, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
7 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!