SRM-520ES-U ((U70926001001 - U70926999999)) Echo Brush Cutter - Overview

Sections of the SRM-520ES-U

[Viewing 19 of 19]
Keep searches simple, eg. "belt" or "pump".
Cap Gasket – Part Number: V107000190
Cap Gasket
PartSelect #: PS16534971
Manufacturer #: V107000190
$5.19
  In Stock
Spark Plug Cap – Part Number: A427000060
Spark Plug Cap
PartSelect #: PS9195670
Manufacturer #: A427000060
$5.73
  In Stock
Screw – Part Number: V805000140
Screw
PartSelect #: PS9428054
Manufacturer #: V805000140
$3.99
  In Stock
Purge Bulb – Part Number: 12318139130
Purge Bulb
★★★★★
★★★★★
(2)
PartSelect #: PS8857246
Manufacturer #: 12318139130
This OEM replacement part is used to pump fuel from the tank to the carburetor in order to start the engine. It may also be referred to as a Primer Bulb. It is made of durable black plastic and is sol...
$6.81
  In Stock
Tube, Fuel Pick-up 3x6x130 – Part Number: V471002311
Tube, Fuel Pick-up 3x6x130
PartSelect #: PS16535478
Manufacturer #: V471002311
$3.99
  On Order
Connector-Cap – Part Number: A365000060
Connector-Cap
PartSelect #: PS9195299
Manufacturer #: A365000060
$3.99
  In Stock
Screw 5X20 – Part Number: V805000210
Screw 5X20
PartSelect #: PS9236889
Manufacturer #: V805000210
$3.99
  In Stock
Valve-Inlet Needle – Part Number: 12313719830
Valve-Inlet Needle
PartSelect #: PS9261212
Manufacturer #: 12313719830
$18.66
  Special Order
Retainer, Rope – Part Number: P022037670
Retainer, Rope
PartSelect #: PS12089474
Manufacturer #: P022037670
$3.99
  In Stock
Pipe-Fuel – Part Number: V470000841
Pipe-Fuel
PartSelect #: PS16535434
Manufacturer #: V470000841
$4.40
  In Stock
Bolt TORX 5x20 – Part Number: V806000050
Bolt TORX 5x20
PartSelect #: PS9237280
Manufacturer #: V806000050
$4.99
  Special Order
Nut 5 – Part Number: 90050000005
Nut 5
PartSelect #: PS9148697
Manufacturer #: 90050000005
This OEM nut is a 5mm, gold, metal nut, which is sold individually. It can be installed with a Wrench or Socket and Torque Wrench by torquing to the manufacturer specifications. This nut is used to se...
$4.99
  In Stock

Questions And Answers for SRM-520ES-U

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bulb was worn out and broken open
The unit is a press fit. To remove the old one required breaking the plastic compression tabs that hold it in place. That was simple enough. Replacing requires lining up in the correct position to meet the inner hose. Then push it in. The compression tabs on the replacement click in and hold.in place.
Parts Used:
Purge Bulb
  • Richard from SPRING HILL, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!