Timer WPW10185982

Hello Billy, Thank you for the question. This would be an issue with the timer switch and it would need to be replaced. Hope this helps!

Hello Leo, Thanks for your question. With your symptoms described, it is recommended to replace the timer. I hope this helps.

Hello James, Thank you for the question. This sounds like an issue with the timer switch, PartSelect Number: PS11749831. The defective timer may need to be replaced. Hope this helps, good luck with this repair!

Hello Larry, thank you for your question. The most likely issue is either the Thermostat, Internal-Bias Part Number: WP3387134, Thermal Cut-Off Kit Part Number: 279816 or the element itself. We would recommend testing the thermostats first to determine if they are faulty. Testing the thermosats is a very easy process. The wires leading to the thermostat are connected using metal slip on connectors. Remove the wires by pulling on the connectors, and not the wires themselves. It may be a good idea to use a pair of needle nosed pliers to help you. Set your multimeter to the R X 1 setting. Take each of your meter's probes and touch one to each terminal. You are testing for continuity, and you should receive a reading of either zero or infinity. At room temperature, testing the thermostat should produce a reading of zero. But if a thermostat is tested when it is heated to its limit, a reading of infinity should be produced. We strongly recommend that you test your thermostat at room temperature. If that isn't the issue you would want to replace the element. I hope this helps!

Hello John, thank you for inquiring. If the Heating Element, part number PS334313, and the Thermal Fuse, part number PS11741460 for your model dryer are testing okay, you will want to consider replacing this Timer, part number PS11749831. Good luck with your repair!

Hi Simon, we can't guarantee this would fix your symptoms but this is the most likely part. Thank you for your question and good luck with your repair!

Hello Kim, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: PS11749831 for the timer switch that turns the knob. Hope this helps, good luck with this repair!

Hello Steve, thank you for your question. The timer is a potential cause of this issue, but the more common part that causes this is the internal bias thermostat. We would recommend testing all the thermostats in the unit to check for continuity, but the most common cause of the dryer not shutting of automatically is the Thermostat, Internal-Bias Part Number: WP3387134. I would also recommend testing Thermal Fuse Part Number: WP3392519. I hope this helps!

Hello Frank, Thank you for the question. With the parts already replaced, this sounds like a defective Timer not going through the cycles and settings properly. Thank you for your inquiry, good luck with this repair!

Hello David, thank you for your question. We have researched the model you have provided, and we would suggest replacing the timer. We hope this helps!