We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cory
November 2, 2021
Control board doesn't light up and buttons do nothing. After unplugging dishwasher, it ran a drain cycle but still no power to the control board?
For model number MDB8959SFZ4
Hello Cory, Thank you for the question. This normally indicates the Control Board is defective and will need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Ken
September 3, 2021
Dishwasher programs, starts, and fills. Wash begins but 3 or 4 minutes later it cancels the cycle and goes into a 2 minute drain. Suspect the control. Any input would be appreciated. Thanks, Ken
For model number MDB8959SFZ4
Hello Ken, Thank you for the question. This is normally an indication the appliance is not processing the cycles properly and the User Control and Display Board would need to be replaced. We hope this helps!
Hello, my dishwasher indicate F2E2 error code. Is the control board defective ?
For model number MDB8959SFH4
Hello Thomas, thank you for reaching out. The F2 E2 error code indicates that the user interface is unable to communicate with the electronic control board. We suggest that you check the user interface board, part number PS11769413, and the control board, part number PS11769634. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
