Detergent and Rinse Dispenser with Cap Specifications
This detergent and rinse dispenser with cap may also be known as the dishwasher dispenser assembly and is a part for your dishwasher. The function of this part is to attach to the inside door panel of your dishwasher and hold the dishwasher detergent and rinse in a closed compartment. The manufacturer has redesigned this part and although it may appear different than the original, it will have the same functionality, which is to release the detergent and rinse aid into the dishwasher. To complete this installation, you will need a Phillips screwdriver, and a pair of needle-nose pliers.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Dishwasher Detergent and Rinse Dispenser with Cap
Troubleshooting
This part fixes the following symptoms:
Will not dispense detergent | Door latch failure | Not cleaning dishes properly | Door won’t close
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Roy K - March 19, 2023
Verified Purchase
Easy repair. Don't pay anybody to replace this
Fit finish all like factory new!!
★★★★★
★★★★★
Danny F - August 1, 2021
Verified Purchase
easy
Parts fit perfectly and the repair was quick and easy.
★★★★★
★★★★★
Pete C - August 4, 2020
Verified Purchase
Easy repair
Part fit perfectly. This is one of the easiest repairs I’ve ever done in the home. Took a total of about 5 minutes to remove the old part and replace it with the new one.
★★★★★
★★★★★
Jeff H - January 11, 2020
Verified Purchase
easy fix, anyone can do this repair if u can use a screwdriver
Back to working fine again. New part is modified and better.
★★★★★
★★★★★
EDWARD S - April 11, 2019
Verified Purchase
Made a world of difference!
Brand new part. Arrived in a timely fashion. I didn’t realize help desperately that old dishwasher needed a new soap dispenser. It really makes a difference.
★★★★★
★★★★★
Lori H - March 30, 2019
Verified Purchase
Quick and Easy
The video attached to my receipt was very helpful and made it so easy. Thanks
★★★★★
★★★★★
Thomas B - February 28, 2019
Verified Purchase
Perfect Fit--Easy Repair
The part fit perfectly. I was worried at first because it looked a little different than my old one but they probably improved the design over time. The installation was really easy but I'm glad the how-to video was available. It explained everything step by step. Dishwasher detergent stays in the dispenser until needed now! If I have to have a complaint it was in that I upgraded shipping and it still took the slow 5-7 day route. I'm still pleased -- saved a lot of money!
★★★★★
★★★★★
Susan H - December 5, 2018
Verified Purchase
Works perfect!
I like your site because you made sure that it was the right part for my model. Other sites don't always have that option. Change out was pretty easy...thank you YouTube for that.
★★★★★
★★★★★
Bill O - October 29, 2018
Verified Purchase
Part fit and works perfectly.
The part was a perfect match and works great. My shipping email came with a helpful link on the repair making it a very quick and easy process. Done and working in minutes.
★★★★★
★★★★★
Joseph H - June 5, 2018
Verified Purchase
Exactly what I was looking for.
Fast shipper! Easy installation.....the video made it so easy.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 25 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
dispenser cover wouldn't stay closed
Removed two screws,one on each side of the bottom part of the door. The door cover then comes off. Then 6 screws hold on the dispenser. Shut off power and remove two wire connections. Replace dispenser. Replace lower door cover and two screws. Done.
Jeff from TREVOSE, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door would not stay closed
Followed the YouTube video. Replacement fit perfectly , only took 10 minutes to replace.
Niall from Schaumburg, IL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door broken would not close
1.Turn off electricity. 2. Remove two Phillips screws on either side of front panel 3. Remove front panel 4. Remove 6 screws from the old dispenser 5. Pull both wires connectors fro
... Read morem dispenser 6. Remove dispenser 7. Install the new dispenser and reverse the steps
Read less
gerald from MILFORD, MA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the lid to the soap dispenser was broken
We read how others did the repair and my husband had no problem changing it.. . I have a daycare and he had it fixed in a few minute after the kids had lunch and had it in before I could get them all laid down for nap. . . he took off the front door, took ooff the pkug in to the dispenser and took it out, then put the new one in, and
... Read more hooked up the plug in and put the front cover back on, and it works great!! My dishwasher hasn't worked this good in a long time. I am swo glad I fo9und this web site. Sharon-Indiana
Read less
SHARON from WINAMAC, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dispenser cap latch broke
I foloowed the others who repared the same item. I really appreciated their help and input. The only thing I would add is when they said that you only have to remove the bottom 2 screws on the inside of the dishwasher door they are absolutely correct. But don't look on the very bottom of the door like I did. They are on the inside of the
... Read moredoor, facing inside. The bottom screw on each side. Thanks for all the help.
Read less
Michael from Moreno Valley, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
8 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My soap dispenser had worn out and wouldn't stay closed anymore
Received the part quickly and installed it with no problem whatsoever. Have order parts from PartSelect before and have been very happy
linda from pittsburgh, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dispenser latch worn out
The actual installation of the dispenser was a breeze. Just unscrew the 6 screws unplug the 2 electrical wires and put the new one in. The problem I had was removing and replacing the front panel of the machine. The metal facing had corroded onto the frame of the door and was difficult to get off. Replacing the door was just as much a
... Read morepain as it had to be lined up correctly with 4 holes in the frame. Did it in the end everything works great. Cheaper than a whole new machine.
Read less
Christine from Indian Shores, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cap would not close
At first I wasn't sure; I thought I had to buy the inner panel of the door. Considering that I have to minimize expenses I made it a point to tackle the problem myself. I unscrewed the outter panel off the dishwasher door and located the dispenser from inside of the inner door panel.
I unplugged the old dispenser,which was dam
... Read moreaged, unscrewed it from the panel and removed it. I cleaned any and all debris, dirt and soap scum it had accumilated over the short years we've owned it.
Finally; after I prepared the new dispenser for installation, I placed it in position screwed it in and plugged it in, which was slightly tricky because it is pretty snug against the inside door panel. Once installed, I got my older son, 15, to help me screw in the outside panel of the door, and as he held it I screwed it on the the inside panel.
I tested it with no dishes inside by pouring just a little detergent in the new dispenser, starting the dishwasher and I stuck around in case there were any leaks or any other possible disaster that could occur.
This was exactly one week ago and all is still well. By the way, the person who took my order, I believe her name was Joann, was great. She talked to me making certain I had the right part, which I was unsure of since the diagram on your site was not quite clear. On top of that; I didn't pay for overnight service, yet my part was at my door the next day. I was amazed at the quick service and delivery. Thanks Joann!!!
Felipe, Poughkeepsie, NY
Read less
Felipe from Poughkeepsie, NY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
latch on detergent holder would not close
Took off 2 screws and took the old detergent holder off and put the new one on....Very easy...took all of 5 mins
Mike from Richmond, ME
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
repair soap dispenser
Took off all the screws, replaced the dispenser-no problem. However, I couldn't get the top to stay in place long enough to get the screws back in. My boyfriend came over and couldn't get it together without using a longer screw in the top area. Now it works great. The only other problem was my bank and my VISA-they both called me
... Read more stating my account was being used out of the country. They issued a fraud alert at first, but I called them and told them everything was fine. Linda Florida
Read less
Linda from Zephyr Hills, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lance
November 12, 2017
I have just the little plastic piece of the soap dispenser door broken do i really have to buy the whole assembly or can i just buy the latch?
For model number FDB856RJS0
Hi Lance,
Thank you for your question. You will have to replace the whole dispenser. Those parts are not made separately from it. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Joanne
October 22, 2017
Is it possible to replace the cover latch on the main wash cup without replacing the whole dispenser?
For model number FDB126RBS1
Hi JoAnne,
Thank you for your question. Unfortunately no, you would have to replace your dispenser to replace that part. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Heriberto
January 18, 2019
My unit door spring broke but opens when washing. The lid doesn’t fully open for the lack of the spring. Can this dispenser be repaired by replacing the spring?
For model number 154574402
Hi Heriberto,
Thank you for your question. The spring is sold with the detergent dispenser. In order to replace the spring you will need a new detergent dispenser. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Peter
September 25, 2019
Hi i’ve replaced the soap dispenser unit but i’m still having same issue. The latch does not stay closed to keep soap in dispenser during wash. I can’t even snap lid closed. Any ideas what the issue is?
For model number FDB520RHS3B
Hi Peter, the first thing to check is the door strike PS2331186. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Carolyn
February 22, 2018
Does the small opening in the middle of the dispenser (not the view indicator for rinse aid) have some sort of cover? If so, is there a way i could cover that opening without buying a whole new part? I'm also curious about what this opening accomplishes.
For model number FGBD2431KB1
Hello Carolyn, thank you for your question. Unfortunately, the round rinse aid cap is only sold with the whole dispenser. For your model the dispenser is Detergent and Rinse Dispenser with Cap 154574401. I hope this helps!
Was this helpful?
Thank you for voting!
Dennis
April 18, 2022
My detergent dispenser doesn't open during the wash cycle. It's a 20 year old Frigidaire, is it worth fixing?
For model number FDB750RCB0
Hello Dennis, Thank you for the question. This is normally caused by a worn out Wax Motor on the back of the dispenser, and the dispenser will need to be replaced. If this is the only issue with the appliance, we recommend replacing the dispenser. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Taiwo
December 16, 2022
I am writing to double check part # PS1524979 will fit my dish washer model number. My serial # is TH02852273. Thanks.
For model number FFBD2407LSOA
Hello Taiwo, thank you for writing. Yes, the Dispenser PS1524979 you had chosen is compatible with your model. Please feel free to give us a call. We look forward to hearing from you.
