This is a drain pump assembly for various compatible models of dishwashers, that is responsible for draining the water from the dishwasher after every cycle. This drain pump assembly is made of plastic and fits within the sump assembly, which controls the flow of water into the drain. This drain pump assembly is a genuine OEM part and is made of a high-quality plastic but is sold as an individual component without any other parts, like its drain pump check ball which works within the pump to prevent water from backwashing into the pump, as well as the drain pump cover. If you notice your dishwasher is not draining or has a lot of water buildup at the bottom of the sump assembly, this filter may be damaged, clogged or broken, and in need of a replacement. To replace this pump assembly, you will only need a Philips-head screwdriver, but should start by removing your dishwasher racks. Then, pull up on the lower spray arm, and drain trap to remove them. Next, rotate the spray arm support and pull that up to remove it, at which point you can remove the base and filter for the drain pump. With those out, you can use your Philips-head screwdriver to disconnect and remove the cover and drain pump assembly. With the pump removed, you can inspect it or install the new drain pump assembly, with the same hardware as before. Then it is as simple as reassembling the rest of your dishwasher, ensuring each connection point is fastened tightly.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Dishwasher Drain Pump -120V 60Hz
Troubleshooting
This part fixes the following symptoms:
Not draining | Noisy
This part works with the following products:
Dishwasher.
Part# A00126401 replaces these:
AP5690431, 154736201, 5304492415
Customer Reviews
Average Rating:
★★★★★
★★★★★
16 Reviews
4.9
Filter By Rating:
5 Stars
15
4 Stars
0
3 Stars
1
2 Stars
0
1 Star
0
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Lou C - March 14, 2024
Verified Purchase
Easy Order and Repair
The part was available and shipped quickly.
The overall repair was very simple even for a rookie
★★★★★
★★★★★
Bryan L - August 25, 2023
Verified Purchase
Drain replacement
I'm some what mechanically inclinded, so it took me a little bit to do myself. Video was veey useful. It was very rewarding to have been able to do within two hours as I had to take apart my stack unit to get into washer.
Definitely worth the cost savings to have repaired my machine with this drain pump!
★★★★★
★★★★★
David S - January 7, 2021
Verified Purchase
Easy Repair
The part was in good condition. My husband put the part in it didn’t take too long and fairly easy instruction.
★★★★★
★★★★★
Richard B - August 21, 2020
Verified Purchase
Easy repair.
The part I ordered was in good shape. The packaging was exceptional. your video on repairing that item is very professional. I wish more companies ran there business the way you do. Thank you for your help. Richard Benning
★★★★★
★★★★★
Tommy B - November 20, 2019
Verified Purchase
order was correct
Everything was correct and arrived in a timely manner.
★★★★★
★★★★★
Robert F N - May 22, 2019
Verified Purchase
Part was readily available.
But I was kept posted until it arrived. Installation was a snap. With your vast range of parts for a lot of appliances, there will be no need to check elsewhere!
★★★★★
★★★★★
Isaac L - April 18, 2019
Verified Purchase
Saved a ton by doing it my self
The part was in exact match. Worked perfect.
★★★★★
★★★★★
Kathleen M - March 13, 2019
Verified Purchase
Great part
Brand new part, easy to install.
★★★★★
★★★★★
Steven H - January 11, 2019
Verified Purchase
Requesting a refund
I appreciate the great service. However, in taking the old part out of my dishwasher, I discovered a small piece of plastic that was the problem. Hence, I did not need to install the new pump I had ordered. I returned the pump to you with the label that was included and it was received by Sutton on 12/27/18. Today I have not received a refund and was wondering when I might expect to receive that.
★★★★★
★★★★★
GREG P - January 7, 2019
Verified Purchase
good fit works as expected
Will purchase more parts when needed from this source
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 6 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Wouldn't drain
Pulled the dishwasher out, rolled it onto its right side, removed the old pump by removing the 2 electeical connectors and 3 #20 torque screws, and replaced the pump. The most annoying thing was it dumping water on the floor. The rest was relatively easy.
Erinn from FINKSBURG, MD
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher stopped draining
Under sink: Disconnected drain hose to garbage disposal, shutoff water feed, unplugged power. Under Dishwasher: Removed water feed connection. On top of Dishwasher: Removed screws anchoring it to cabinet. Pulled dishwasher out and flipped down so it’s resting on the front. Removed drain hose on drain pump.
... Read more />Removed 3 torx screws on pump, greased o-ring on new pump and reinstalled doing the reverse of these instructions. Took 1 hour and now it works great!
Read less
William from FRANKLIN, TN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water did not drain from the bottom of the dishwasher
My husband and dad actually did the repair, but my husband not being a handy guy said it was, 'so easy, anyone could do it!' He was very nervous about taking on the project, the longest part was testing to make sure it worked(running a cycle). The simply pulled out the dishwasher, after disconnecting all electrical power, drained the
... Read more rest of the water that we couldn't see from above, following the video given took out the old part without needing to take out the motor and were able to replace the drain pump, put everything back together besides sliding it into place in case it didn't work, in less than 15 minutes! When the short cycle finished and the water had drained they put it back into place and ran an energy saver cycle and it worked like a charm! Since then(2 weeks ago) we have now ran every function and have had no issues! Every time we open the dishwasher we comment on how much we missed having a dishwasher! Haha!
Read less
Nicole from APPLETON, WI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench set
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drain pump had failed.
Disconnected power, water, and drain tube from dishwasher. Pulled dishwasher out and laid it on right side. It was not necessary to remove the pump motor. When disconnecting the water line, it is better to remove 3/8 line from the appliance adapter rather that the appliance adapter from the dishwasher as the nylon connection tends to
... Read morestrip.
Read less
Michael from GLEN RIDGE, NJ
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace a drain pump on dish washer
It only took about 20 minutes to replace. Thanks for the video.
Duane from LEBANON, OR
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher made squealing noise during drain portion of cycle
Replaced drain pump. It helped some but still hear some squealing. I suspect the main pump might be worn as well. The drain pump did have some "looseness" to it compared to the new part.
Mark from NAPLES, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
13 of 28 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
13 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Greg
October 8, 2017
How do you replace the drain pump (60)? Do replace from the bottom or from inside the unit by removing 10 and 14?
For model number FPHD248!KF0
Hi Greg,
Thank you for your inquiry. There is a video on our website that you can reference on how to install the. You will find the video under part number PS1765174. I hope this helps. Thank you and have a great day!
12 people found this helpful.
Was this helpful?
Thank you for voting!
Mark
September 11, 2019
Replaced the drain pump, but still have standing water. The sump cover plate is broken where the screws hold it down and will be replaced. What else could be causing the dw to not drain?
For model number FGID2466QF3A
Hi Mark,
Thank you for your question. It is normal for a some water to remain in the dishwasher after a cycle has completed. Usually approximately 2 cups. If it is more then that, you will need to check the drain hose, the flapper valve and the float switch. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Lee
January 7, 2019
My dishwasher has a lot of standing water left over after the cycle, and I unclogged the filter, drains pipes and garbage disposal. Will this part fix that?
For model number FFBD2406NS9B
Hello Lee, Thank you for the question. If there is no blockage preventing it from draining properly, The drain Pump will be the next part suggested to replace or check for debris and clogs. Hope this helps, good luck with this repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Aaron
December 14, 2022
Last week, my dishwasher would not drain. Checking first for a clog, I pulled out the end of the drainpipe and blew into it to try to clear out any clogs. It took a while but eventually it made it through to the dishwasher basin. But it still didnt drain.
I then removed the drainpipe and re-attached. I never found anything that would clog it. But when I reassembled it, it worked. But again yesterday it stopped draining again. But I would try to re-attach some of the wires and it would eventually work. But sometimes would stop in the middle of running, with lights flashing or it all would go dark. Again, I'd "play" with the wire connections underneath a bit and it would eventually run through. I have no idea if any of my write-adjusting is having an effect or not.
Based on my search here, it may need a drain pump assembly replaced, but is there any other troubleshooting I can do before I go that route to be sure that is the issue?
Thank you for your time - I appreciate the assistance.
For model number FFBD2411NS6B
Hello Aaron, thank you for contacting us. Before replacing the drain pump, we would recommend checking the wire connections of the pump and making sure no connection is loose or damaged. Also, check the drain pump filter, part number PS11770489, and ensure that it is not damaged or clogged. If this does not help, replacing the drain pump, part number PS8689824, is the most likely solution. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Within the last couple months, i have had standing water in the bottom of the dishwasher at least 5 times, i then go through the process of taking it apart, as your video explains and it will work until the next time. Even through it works after, why does it keep happening, i was going to install a new pump, put not sure that will fix it, any ideals?
For model number FFBD2412SSOA
Hi Donnie,
Thank you for your question. If the dishwasher is not draining, there are some parts that you will need to check to see which one is causing the issue. You will need to check the drain pump, the drain hose, the valve flapper, the lower spray arm, the dishwasher filter, the float switch and the support. We hope this helps. Thank you and have a great day.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Gayle
February 16, 2018
Does not remove water when finished
For model number FFBD2411NW5A
Hi Gayle, Thank you for the question. If the appliance is not draining at all, I suggest replacing the drain pump assembly. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Kathy
November 16, 2018
How do i replace part #ps8689824. In looking through other questions about replacing this part it refers to a video that replaces a part labeled the drain pump however it is a different part than the one i purchased. Any videos or diagrams on how to replace this part would be helpful.Thank you
kathy
Hi Kathy,
Thank you for your question. The video is meant as a reference to give you a general idea on how to install the part. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Kenneth Oatman
December 26, 2017
How do i change the drain pump?
For model number LGBD2431LF0A
Hello Kenneth, Thank you for your inquiry. I have supplied a link to a repair video to assist you. Hope this helps!
https://www.partselect.com/PS1765174-Frigidaire-154580301-Drain-Pump.htm?SourceCode=3&SearchTerm=PS1765174#RepairVideo
1 person found this helpful.
Was this helpful?
Thank you for voting!
Erika
July 2, 2021
Dishwasher makes buzzing loudish noise while washing but not when draining. Is there a circulation pump and a drain pump? I'm guessing it is the pump that circulates the water that is noisy and I have part number 154736201 kicking around. Would this be the pump to replace the one in the dishwasher currently?
For model number FFBD2409LW0A
Hello Erika, Thank you for the question. The 154736201 is a Drain pump. The Circulation Pump is Manufacturer Part Number 154844301. We hope this helps!
My dishwasher is not draining. I removed the pump motor and connected it directly to 120 volts and the motor ran just fine. I found debris in the chamber where the pump propeller spins and removed it. After I reinstalled everything and ran the rinse cycle, it did not drain. Could it still be the pump motor, or something else?
For model number BGHD2433KB1
Hello Steve, thank you for the great question. If your drain pump seems to be ok, check for obstructions in the Drain Hose, Filter Assembly and Soil Trap. These parts may need to be cleaned or replaced. We hope this helps!
