Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jim T - November 10, 2020
Verified Purchase
Worked like a charm & the wife is HAPPY!
The parts service on the phone was excellent. After I did my homework they knew exactly what part I needed. It arrived quickly and went on easily. The panel fascia on my Bosch dishwasher does not involve wires or mechanical parts, and the new one was a perfect fit. Though the price was more than I expected for a "fancy piece of plastic" the dishwasher would otherwise have had to be replaced (if for no other reason appearance) -- and that would have cost a whole lot more. The dishwasher is 12 years old (still runs perfectly) and I was impressed that I could get my hands on the correct part so quickly and easily after so many years. Thanks!
★★★★★
★★★★★
Elaine G - August 5, 2020
Verified Purchase
Repair accomplished
The part arrived very quickly. I only wish I had seen a picture of it before ordering. I didn't realize I would have to move the switches. But, I installed it myself and everything works. I have never repaired anything like this before, so I am pleased
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Electronics facia had broken pieces from opening the dishwasher
I removed the old electronic facia. You will need to remove the front bottom panel to get to the bottom screws that attach the facia. Be careful there are some sharp edges. After removing the bottom 2 screws you will need find 2 clips at the bottom sides of the facia. When the clips are free pull the bottom out first then lift up. You wi
... Read morell need to transfer the buttons from the old unit. Lift those all the way up gently and they should come out easily. It would probably be a good idea to first number the buttons to ease them going back on. You don’t need to take this step as long as you notice the buttons on the right have different lengths in back due to the curvature of the facia. Reverse the process to reattach.
Read less
Alan from FORSYTH, MO
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
On/Off button didn't work. Saw that facia was broken at the two front screws
Reading other posts I saw that the issue was not the button or the latch but the fact that stress is mostly applied to the two pieces of plastic holding fastening screws on the front. Both plastic pieces broke off the main fascia. Phone support got me the correct repair piece and youtube video showed the replacement very well. Hardest
... Read morepart was finding the Torx bit at Home Depot. Once replaced all seems to be working perfectly.
Read less
PAUL from WEST CHESTER, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Doug
January 4, 2019
Is the panel facia the upper part of the front door where the buttond are?
For model number SHE44C02UC/40
Hi Doug,
Thank you for your question. Yes, the panel fascia is the control panel that is at the top of the dishwasher door. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Joanne
January 11, 2019
Considering replacing the door panel on my white Bosch dishwasher to stainless. I see the part number for that is ps8717571. What colors, besides white, are available for the control panel facia (ps8717075) should i decide to change that also?
For model number SHE43F02UC/50
Hello Joanne, Thank you for the question. We have the Stainless Steel Facia, PartSelect Number PS8717076 and the Black Facia ,PartSelect Number PS8717077. Hope this helps, good luck with this repair!
I’m looking for a stainless steel panel for front and also control panel. Do you still make these? And what are parts numbers.
For model number SHE43F02UC/48
Hello Julie, Thank you for writing. Sadly, the part you are requesting we do not have listed in Stainless Steel. We strongly recommend you contact the manufacturer, as they would have this information in their system. Ask them for the part number you require and contact back to see if it is something we carry. We hope this helps.
