Electrolux Microwave Switches

Find Your Part

Model number locator Need help finding your model number?
  • Search your model number to find:
  • Genuine OEM parts guaranteed to fit
  • Free manuals and guides
  • Repair instructions and videos
Electrolux Appliance Parts
Shop By Part Type

Popular Electrolux Microwave Switches

Your Price
$38.57
  In Stock
Electrolux Microwave SWITCH
PartSelect Number PS12071303
Manufacturer Part Number 5304509460
Fixes these symptoms
Installation Instructions
Arthur from LUTZ, FL
Microwave tripped circuit breaker when turned on
Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped. Read more...
Your Price
$52.13
  In Stock
Electrolux Microwave Door Switch
★★★★★
★★★★★
4 Reviews
PartSelect Number PS12071302
Manufacturer Part Number 5304509459
This door switch is designed for use with various makes and models of microwaves and is a genuine OEM part. This individually sold switch connects to the frame of the microwave through the door switch holder, which will need to be removed completely in order to replace this switch. If your microwave will not start, displays error codes, or if the door will not shut properly and the inner light stays on, the switch could have broken from use and is in need of replacement. Due to the high voltage used within the components of microwaves, take extra caution when repairing your microwave. To replace the door switch in your microwave, disconnect the microwave from the power, and use a flat-head screwdriver to gain access to the switch through the main control panel.
Fixes these symptoms
Your Price
$45.13
  In Stock
Electrolux Microwave SWITCH
PartSelect Number PS8769124
Manufacturer Part Number 5304493153
The relay switch may also be known as the door micro switch and is a part for your microwave. The function of this part is to monitor the door latch and communicate whether the door latch is open or closed to the electronic control board. Before making this repair, you will want to make sure to unplug your microwave and discharge the capacitor. Your microwave capacitor is able to store electricity in large quantities even after it has been unplugged. The most common reason for replacing your relay switch is if the microwave will not turn on but your timer still runs..
Fixes these symptoms
Installation Instructions
Tim from Chicago, IL
Timer would run but the microwave won't start
I first removed the top plate above the microwave door (3 screws), then I removed the plate containing the buttons and clock. The microwave has 3 relay switches and they are in a little holder. The holder was too difficult to remove so I just removed the bottom switch and replaced. The microwave started right up. Read more...
Your Price
$48.95
  In Stock
Electrolux Microwave SWITCH
PartSelect Number PS1532505
Manufacturer Part Number 5304456101
Your Price
$32.25
  Special Order
Electrolux Microwave SWITCH
PartSelect Number PS11728400
Manufacturer Part Number 5304503483
Your Price
$38.51
  Special Order
Electrolux Microwave SWITCH
PartSelect Number PS1532827
Manufacturer Part Number 5304457605
Your Price
$57.28
  In Stock
Electrolux Microwave SWITCH
PartSelect Number PS2339493
Manufacturer Part Number 5304467695
Your Price
$93.65
  In Stock
Electrolux Microwave Micro Switch with Line Fuse
PartSelect Number PS466978
Manufacturer Part Number 5303319559
Installation Instructions
Jacob from Ludowici, GA
Microwave would not turn on
To determine which switch was bad, I removed all three switches from microwave. I used a D-cell battery taping two pieces of wire to the POS and NEG ends. Tape the POS end of wire to a flashlight bulb's bottom tip. Tape or twist the NEG end to the bottom of the switch. Connect another piece of wire to the top of switch and touch the side of the flashlight bulb with the other end of the wire; the bulb should come on. Depress the red button on the switch and the light should go out. The switch is good if this occurs. If light does not come on or the bulb does not got out once the red button is depressed, the switch is bad. Now you have determined which switch to order for replacement. Read more...

Related Electrolux Microwave Parts

Back to Top