Lawn Mower Parts

Popular Lawn Mower Parts

Your Price
$4.99
   Special Order
Lawn Mower Blade Adapter
PartSelect Number PS16477373
Manufacturer Part Number 997027001
This OEM blade adapter is made of high-quality metal and is compatible with various models of lawnmowers and lawn tractors. It connects the lawnmower blade to the crankshaft, allowing the blade to rotate freely and cut grass effectively. This adapter has one keyway/tab, a full-circle, and half-circle, on each side of it to lock the blade to the crankshaft. Failing to replace this adapter could result in poor cutting performance, and increased wear on other components like the crankshaft, and could pose a serious safety threat. To replace this adapter, you will need to prop/wedge your lawnmower up on some wood to access the cutting deck. You will also need a wrench to loosen and remove the bolt securing the blade and adapter to the crankshaft. Replacing this adapter is as simple as tapping it lightly with a hammer to jostle and carefully remove it, and then install the new one.
Fixes these symptoms
Your Price
$17.09
   On Order
Lawn Mower Mulching Plug
PartSelect Number PS16374898
Manufacturer Part Number 586922701
Your Price
$6.21
   In Stock
Lawn Mower Bearing
★★★★★
★★★★★
3 Reviews
PartSelect Number PS9006914
Manufacturer Part Number 532009040
The OEM bearing, also known as the flange bearing, is silver, made of metal, and sold individually. It is used on riding mowers to secure the wheel in place and allow it to rotate freely on the shaft. Over time, the part may become worn and damaged, which you will notice if you experience a squealing or grinding sound from the wheel in question, or you notice the wheel is sloppy on the shaft. You will need a hammer and punch to complete this repair, which most of our customers rated as easy. Make sure you tap the new bearing into place evenly inside the tire rim.
Installation Instructions
robert from EUREKA, CA
transaxle rotated forward on 2015 Husqvarna YT42DXLS
2015 Husqvarna YT42DXLS. Both transaxle support struts broke causing the transaxle rotated forward and shear transaxle mounting bracket. The transaxle was not damaged. All 3 parts required replacement. There are some good youtube videos to watch to show how to complete the repair.

HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.

HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.

HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.

HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.

HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.

HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance.
Read more...
Your Price
$17.95
   On Order
Lawn Mower Bag Frame
PartSelect Number PS16374900
Manufacturer Part Number 586929102
Your Price
$3.99
   In Stock
Lawn Mower Ring Klip Number T5304-75
★★★★★
★★★★★
1 Review
PartSelect Number PS9143890
Manufacturer Part Number 812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle. This part is black, made of metal, and around an inch in length. It is sold individually and may become damaged over time due to wear and fatigue.
Your Price
$19.00
   On Order
Lawn Mower Height Guide Assembly Metric
PartSelect Number PS16666196
Manufacturer Part Number 144-4805
Installation Instructions
Anthony from OLIVEHILL, TN
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side. Read more...
Your Price
$37.15
   On Order
Lawn Mower Grass Catcher Frame
★★★★★
★★★★★
1 Review
PartSelect Number PS9988561
Manufacturer Part Number 647-04271-0637
Your Price
$3.99
   In Stock
Lawn Mower Cap Axle Black 1 50 x 1 00
★★★★★
★★★★★
1 Review
PartSelect Number PS9007667
Manufacturer Part Number 532104757
This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of your lawn mower or garden tractor. Over time, your dust cap may become damaged or lost due to wear and tear. If this happens, dirt and debris can freely enter the axle and hub, causing damage. This is an easy repair to make and does not require any tools. Just look for the cap axle on the rim of the wheel to make your repair.
Installation Instructions
Anthony from OLIVEHILL, TN
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side. Read more...
Your Price
$21.00
   On Order
Lawn Mower Grassbag Frame
PartSelect Number PS11824788
Manufacturer Part Number 585054702
Your Price
$4.99
   In Stock
Lawn Mower TERMINAL, XRU11
PartSelect Number PS16390378
Manufacturer Part Number 644809-6

Lawn Mower Brands

Related Lawn Mower Parts

Popular Lawn Mower Models

Below are the most popular Lawn Mower models we have. Enter your model number in the search box to find your model.