Pressure Washer Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Pressure Washer Parts
Your Price
$5.95
In Stock
Your Price
$30.94
In Stock
Your Price
$19.38
In Stock
Pressure Washer Fuel Valve W/bushing
PartSelect Number PS8911051
Manufacturer Part Number 192980GS
Made of durable rubber and plastic components, this Fuel Valve and Bushing are designed for use in over 150 models of generators and pressure washers. This item is sold as a kit, including the valve and the rubber cap. Its primary purpose is to deliver fuel from the tank to the carburetor.
This part is found on the underside of the fuel tank and should be replaced when it is worn or damaged. When malfunctioning, it may cause your engine to be starved of fuel and run rough or not at all. You will need a screwdriver and pliers to complete this repair.
Customers rate this repair as Easy.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
James from PICAYUNE, MS
Dry rotted rubber
Put some dish soap on the rubber, push into the tank hole, slip 1x2 into the handle of the tank and over the new part and pry down pushing it into the hole. Took about 2 minutes.
Read more...
Your Price
$5.19
In Stock
Pressure Washer Detergent Suction Kit
PartSelect Number PS9938134
Manufacturer Part Number 308452002
This detergent suction kit, also known as a soap or chemical injection kit, is designed for use with a pressure washer. This is a genuine OEM part designed to inject soap into the water stream of your pressure washer, and includes the main injector valve, two differently sized O-rings, a spring, and a ball bearing. One end of this kit will be threaded into the washer, and the other will lead to your cleaner with a siphon, which is sold separately. This injection kit would need to be replaced if the nozzle is leaking, the injector fails to work properly, or water is getting into the soap dispenser. To replace, simply unscrew the previous injector and remove it, then fit the small O-ring inside the threaded end of the new injector, along with the ball bearing and then spring. Wrap the larger O-ring around the base of the threaded end, and apply a layer of lubricant, before installing the new injector and securing it.
Fixes these symptoms
- Leaks water
- See more...
Installation Instructions
Duarte from GRISWOLD, CT
Must have froze over winter (stored in garage)
Repair was easy, however had to u tube issue for proper orientation of parts as it did not come with any instructions. Wished I had two as shipping was twice as much as part. Very satisfied.
Read more...
Your Price
$27.40
In Stock
Pressure Washer Chemical Injection Kit
PartSelect Number PS8911045
Manufacturer Part Number 192914GS
Used to connect the hose that supplies the chemical cleaning solution (soap), this OEM replacement Chemical Injection Kit consists of the brass fittings, a metal ball, a spring, and a rubber seal, and is an exact replacement for various pressure washers.
If the cleaning solution will not dispense, it is possible that you need a new Chemical Injection Kit. Inspect it for signs of wear or damage and replace it if needed. This part is known to wear over time. You will need a wrench set to complete this repair.
Customers rate this repair as Easy.
Installation Instructions
Carl from ARCADIA, FL
The copper fitting on the chemical injection broke.
I order the part from this site and received it within a week. the only problem was that spring was missing out of the sealed bag. NO PROBLEM!!! I cut a ball point pen spring to fit and everything works just fine. You just have to remember to put the spring in first, then the ball bearing and then the rubber o-ring.If you put them in backwards you pressure will fed directly into your chemical container!!
Read more...
Your Price
$9.97
In Stock
Your Price
$6.65
In Stock
Your Price
$8.69
On Order
Your Price
$5.95
In Stock
Pressure Washer Outlet Tube
PartSelect Number PS9938530
Manufacturer Part Number 308862003
This OEM outlet tube, also known as a hose connector, allows pressurized water to flow from the pump of your pressure washer to the nozzle. Connecting the hose to the handle assembly and the spray wand, it is where the water exits from your machine so you can direct the stream towards a desired surface. You can tell if an outlet tube is broken when it has visible cracks or holes and when water leaks or sprays from the connection points or along the tube. A damaged or blocked tube can result in a loss of pressure and potentially premature wear or machine failure. To remove the outlet tube, use a wrench set to unscrew it from the pump. Please note that this replacement part is sold separately from the pump assembly.
Fixes these symptoms
- Leaks water
- See more...
Your Price
$5.89
In Stock
Pressure Washer Oil Sealing
PartSelect Number PS9984414
Manufacturer Part Number 6.365-393.0
This OEM Grooved Ring is a 12 x 20 x 4/6 rubber ring which can be installed with a screwdriver and wrench set. Installation is rated as "Medium" difficulty. It attaches in the cylinder head and is used to keep the oil in the pump from mixing with the water. If broken it will leak and must be replaced.
Pressure Washer Brands
- Briggs and Stratton Pressure Washer Parts
- Husqvarna Pressure Washer Parts
- Snapper Pressure Washer Parts
- Troy-Bilt Pressure Washer Parts
Related Pressure Washer Parts
- Pressure Washer Agitators
- Pressure Washer Attachments and Accessories
- Pressure Washer Bearings
- Pressure Washer Belts
- Pressure Washer Brackets and Flanges
- Pressure Washer Caps and Lids
- Pressure Washer Circuit Boards and Touch Pads
- Pressure Washer Compressors
- Pressure Washer Dishracks
- Pressure Washer Dispensers
- Pressure Washer Doors
- Pressure Washer Drawers and Glides
- Pressure Washer Drums and Tubs
- Pressure Washer Ducts and Vents
- Pressure Washer Filters
- Pressure Washer Glass Trays and Supports
- Pressure Washer Grilles and Kickplates
- Pressure Washer Handles
- Pressure Washer Hardware
- Pressure Washer Hoses and Tubes
- Pressure Washer Ice Makers
- Pressure Washer Knobs
- Pressure Washer Legs and Feet
- Pressure Washer Lights and Bulbs
- Pressure Washer Lubricants and Adhesives
- Pressure Washer Motors
- Pressure Washer Pedals
- Pressure Washer Pumps
- Pressure Washer Remote Controls
- Pressure Washer Seals and Gaskets
- Pressure Washer Spark Plugs
- Pressure Washer Spray Arms
- Pressure Washer Springs and Shock Absorbers
- Pressure Washer Switches
- Pressure Washer Tanks and Containers
- Pressure Washer Transmissions and Clutches
- Pressure Washer Trim
- Pressure Washer Tune Up Kits
- Pressure Washer Valves
- Pressure Washer Wheels and Rollers
- Pressure Washer Wire Plugs and Connectors
Popular Pressure Washer Models
Below are the most popular Pressure Washer models we have. Enter your model number in the search box to find your model.
- DXPW3425 Professional Gas Cold Water Pressure Washer
- DXPW3025 Gas Pressure Washer
- K2400HH Pressure Washer
- K2400HH Model # K2400hh Official Karcher Pressure Washer
- K2400HH Pressure Washer
- RY80940B Pressure Washer
- DXPW4240 Gas Pressure Washer
- RY80940 Pressure Washer
- DXPW3835 Gas Pressure Washer
- RY14122 Pressure Washer
- RY14122 Ry14122 Pressure Washer Mfg. No. 090079210 2-27-18 (Rev:03)
- RY14122 Ry14122 Pressure Washer Mfg. No. 090079270 5-21-19 (Rev:06)
- G2400HH Pressure Washer
- G3050OH Pressure Washer
- 244390 Pressure Washer w/6.5Hp Honda Motor
- DPW3835 3,800 PSI TC Pump Commercial Gas Pressure Washer
- UT80993A 2700 PSI Gas Pressure Washer
- K5740 Pressure Washer
- HL252300 Pressure Washer
- 244391 Pressure Washer w/9Hp Honda Motor