Tiller Parts

Popular Tiller Parts

Your Price
$3.99
   In Stock
Tiller Clevis Pin
★★★★★
★★★★★
2 Reviews
PartSelect Number PS9009427
Manufacturer Part Number 532132673
This clevis pin is an OEM replacement part that is compatible with various makes and models of tiller and is sold as an individual part. The purpose of this pin is to snap or break under a certain amount of pressure if your tiller is jammed, to protect the more valuable components of your tiller. Measuring at approximately 2-inches long and made of high-quality metal, replacing this pin should only require pliers to swap out the old pin for the new.
Your Price
$22.11
   In Stock
Tiller Fuel Tank Assembly W/Fuel Lines Incl. 29
★★★★★
★★★★★
1 Review
PartSelect Number PS11812933
Manufacturer Part Number 753-06797
The fuel tank assembly is responsible for storing and supplying fuel to the engine in lawn and outdoor power equipment. It includes the tank, fuel cap, and fuel lines. The fuel tank assembly will fail if the tank develops cracks or leaks, or if the fuel lines can become clogged. When the fuel tank assembly fails, you will notice fuel leakage, restricted fuel supply, stalling, difficulties starting and overall lower performance. Before beginning any repairs, first drain any remaining fuel from the tank for your safety. Disconnect the fuel lines from the tank and remove the fuel tank from the equipment. Position the new tank on to the mounting holes and secure it in place. Connect the fuel lines to the engine and vent to complete your repair.
Installation Instructions
Robert from ORANGE, CA
One of the two fuel lines cracked and leaking
Removed the 6 screws holding the red plastic cover, tank, and the old fuel lines from the carburetor. Placed the new tank in the sunlight for a few minutes to soften the new fuel lines. Then attached the new lines to the carburetor and replaced the cover Read more...
Your Price
$40.96
   In Stock
Tiller Extension Control Cable Reverse (1430mm)
PartSelect Number PS16723235
Manufacturer Part Number A203121
Your Price
$3.99
   In Stock
Tiller Clip, Hairpin
PartSelect Number PS9007536
Manufacturer Part Number 532003146
This hairpin clip, also known as a cotter pin, is a genuine OEM sourced part used to secure rotating components together in various outdoor power equipment. It is made of steel and is approximately 1.5 inches long. The clip acts as a fastener to prevent the moving parts from loosening and falling off during usage. The clip is vulnerable to corrosion and general wear over time. However, it can also fail prematurely due to overloading and excessive stress. A damaged hairpin clip will result in misalignment of parts, accidental disassembly, increased friction and wear, and potential harm to the user. Remove the faulty pin and align the new one with the insertion points. Ensure that the pin is securely fitted in its appropriate slot and compress the ends to prevent it from dislodging.
Your Price
$11.83
   In Stock
Tiller Throttle Cable
★★★★★
★★★★★
1 Review
PartSelect Number PS10009725
Manufacturer Part Number 753-06831
Your Price
$18.86
   Special Order
Tiller Cbl/Cltch T
PartSelect Number PS11971272
Manufacturer Part Number 583731701
Your Price
$3.99
   In Stock
Tiller Air Filter
★★★★★
★★★★★
1 Review
PartSelect Number PS9117898
Manufacturer Part Number 753-05996
Your Price
$143.84
   In Stock
Tiller Wheel, 13 Inch, Right
PartSelect Number PS10041115
Manufacturer Part Number A200809
This is a genuine OEM supplied replacement wheel that is specially manufactured for use on Powermate and Southland rear tine tillers. It is the right wheel that keeps the unit mobile for easy transportation. This high-quality wheel is sold individually, it consists of a metal rim and a durable rubber tire. Please note the left wheel and the hardware to secure these parts are all sold separately.
Installation Instructions
Willie from BLYTHEWOOD, SC
tiller tires lost air pressure both tires during tilling in gardening. .Try to replace innertube. No dice. Ordered wheel assembly completed.
After receiving wheel assembly, 5 minutes installation wheels installed. Back in business! Read more...
Your Price
$4.54
   In Stock
Tiller Cable Barrel Holder
★★★★★
★★★★★
1 Review
PartSelect Number PS9167431
Manufacturer Part Number 946-0605
This cable barrel holder is a genuine OEM part that is designed for use with tillers and snow throwers. Sold as an individual part, this holder measures approximately 1-inch in length and is used to secure the clutch control handle and cable together. This holder is made of durable plastic and can replace the old holder by simply removing it, inserting the cable into the new holder, and tightening it until it is locked in place.?
Your Price
$22.10
   In Stock
Tiller 13" Articulating Tine
PartSelect Number PS10007424
Manufacturer Part Number 742-0305A-0637

Tiller Brands

Related Tiller Parts

Popular Tiller Models

Below are the most popular Tiller models we have. Enter your model number in the search box to find your model.