Edger Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Edger Parts
Your Price
$6.59
In Stock
Edger Primer
PartSelect Number PS11826485
Manufacturer Part Number P005003120
This Primer Bulb is a clear, plastic, individually sold part with an Outer Diameter of 0.720 inches (18.30 mm) and a Height of 0.674 inches (17.12 mm). With Flange: 0.842" (21.40 mm). This part is rated as Easy to install by customers, and attaches to the primer pump assembly.
If the part shows signs of breakage, such as cracks appearing due to the bulb drying out, or fatigue, then it must be replaced. Refer to your owners manual/model number to ensure you are choosing the correct part.
Fixes these symptoms
- Will Not Start
- See more...
Your Price
$3.99
In Stock
Edger Spark Plug Bpm-8Y
PartSelect Number PS9263506
Manufacturer Part Number 15901019830
This Spark Plug Bpm-8y is a silver and white OEM part. Made of steel and ceramic it is individually sold, and is an electrical part. It is installed with a spark plug socket and is rated as Easy to install. It is attached inside of the cylinder head, and is used to ignite the air fuel mixture inside the combustion chamber.
You can clean the spark plug with a fine sandpaper of 180 or more, then spray it with carburator cleaner and wipe dry. However, even after regular maintenance, spark plugs need to be changed as part of good engine fine-tuning. Regap to manufacturer specifications. Refer to your owners manual or model number to ensure you are choosing the correct product.
Note: If your engine has more than one cylinder and sounds like it has a miss, you can remove each spark plug wire one at a time to find the miss. If the engine drops in rpm when you remove the wire, then that cylinder is fine, if it does not drop then you have found your miss!
Your Price
$6.08
In Stock
Edger Air Cleaner Element
PartSelect Number PS10039827
Manufacturer Part Number A100631
This foam air cleaner element helps to keep dirt and debris out of the engine in your lawn equipment. It is sometimes called an air filter element, cartridge, or insert. You can find it near the engine in a housing that lets air into the combustion chamber, where it gets mixed with fuel. This fuel-air mixture produces energy that powers the engine when it is ignited by the spark plug. If the element gets dirty or clogged, you will need to replace it. If you do not replace it, you may notice black smoke coming out of your machine. Your engine will work poorly and might use more gas than it should. To remove your element, refer to your user manual for instructions, as the steps may vary from one model to another. Generally, you need to locate the element housing and remove the screws or clips that hold its cover in place. You can then carefully remove the element from inside. This genuine OEM replacement part is sold individually.
Installation Instructions
Manuel from SELMA, NC
edger will not run longer than 1 minute
I replaced the carburetor, air filter, cleaned out the gas tan and replaced the fuel line and filter. As a last resort I replaced the gas cap and gas still will not flow from the gas tank to the carburetor. I have worked on engines of all sizes over the years and this one has me stumped.....by the way I am 71 years old:) If anyone has an idea please le me know.
Read more...
Your Price
$7.09
In Stock
Edger Air Filter
PartSelect Number PS9195232
Manufacturer Part Number A226001410
This part is the replacement air filter for your small engine, used for outdoor power equipment. It has a black plastic rim that is approximately 2.5 inches by 2.5 inches. The air filter in your small engine prevents dirt and debris from entering the cylinder, where it can cause more serious damage. If your air filter is clogged, it can decrease your engine performance, and it will need to be cleaned or replaced. If the filter is damaged, it will need to be replaced as well. This is an OEM part sourced directly from the manufacturer, and is it sold individually.
Installation Instructions
Paul from SENECA, SC
Fuel line grommet rotted
This blower is quite old looked on YouTube. Removed grommet with needle nose pliers. Removed tank to install new parts. I had trouble getting return line off carb so planned to reuse it after grommet was in place. Thin was a mistake because the seated grommet compresses the holes. Took unnecessary time to get it through. With my trimmer with all lines in place. Hardest part was to get the grommet to seat even with silicone.
Read more...
Your Price
$4.99
In Stock
Edger Primer Pump
PartSelect Number PS8858167
Manufacturer Part Number 12318140630
The Primer Pump, aka the Pump Bulb, is a clear, individually sold, plastic part, sourced from the original equipment manufacturer. It has an Outer Diameter of 0.616 Inches, 15.66mm and is 0.558 Inches and 14.19mm in height. This part is used to pump fuel from the tank to the carburator and is rated Easy to install.
This part installs onto the primer assembly. If the part dries out or starts leaking that means it is broken (likely due to fatigue or general wear) and must be replaced. Check the model number to ensure you are choosing the right part.
Your Price
$20.99
In Stock
Edger Fuel Tank Assembly W/Fuel Lines Incl. 29
PartSelect Number PS11812933
Manufacturer Part Number 753-06797
The fuel tank assembly is responsible for storing and supplying fuel to the engine in lawn and outdoor power equipment. It includes the tank, fuel cap, and fuel lines. The fuel tank assembly will fail if the tank develops cracks or leaks, or if the fuel lines can become clogged. When the fuel tank assembly fails, you will notice fuel leakage, restricted fuel supply, stalling, difficulties starting and overall lower performance. Before beginning any repairs, first drain any remaining fuel from the tank for your safety. Disconnect the fuel lines from the tank and remove the fuel tank from the equipment. Position the new tank on to the mounting holes and secure it in place. Connect the fuel lines to the engine and vent to complete your repair.
Your Price
$3.99
Special Order
Edger Push Cap
PartSelect Number PS9939772
Manufacturer Part Number 311153001
This depth restrictor push cap fastens the depth restrictor wheel in your edger, which serves to prevent you from setting the cutting depth of your machine too low. It acts as a safety feature that limits how deep the blade can go into the ground. Typically located near the motor housing on the bottom part of the edger, a damaged push cap may show visible deformations and cause the restrictor wheel to slip during operation. Without a functioning push cap, you risk setting the cutting depth too low, potentially damaging the edger or underground structures. To remove a damaged push cap, use a flathead screwdriver to gently pry it off, starting at one edge and applying even pressure. Please note that this OEM replacement part does not include the depth restrictor wheel.
Your Price
$4.99
In Stock
Edger Fuel Line Grommet
PartSelect Number PS8859978
Manufacturer Part Number 13211546730
This fuel line grommet is compatible with several types of outdoor power equipment. The fuel line grommet creates a seal where the fuel line enters and exits the fuel tank. It is made of black rubber and this version has 3 holes. If your fuel tank or fuel lines are leaking fuel, or your current fuel grommet is worn out, you should consider replacing it. This item is sold individually.
Installation Instructions
Donald from ORANGE PARK, FL
fuel tank leaking around where lines went in tank
took all the old parts off and replaced them
Read more...
Your Price
$7.46
In Stock
Edger Fuel Line (25" Length)
PartSelect Number PS9472350
Manufacturer Part Number 530069599
This Fuel Line is a 25-inch, clear, plastic line used to deliver fuel. It requires a screwdriver, pliers, socket set, and nut driver and is rated as "Easy" to install by customers. If the fuel line wear out to the point of breaking, cracks and/or leaking will appear and the part should be replaced. Refer to your make, model and diagram to ensure this is the correct part for you.
Your Price
$4.99
In Stock
Edger Chute Flange Keeper
PartSelect Number PS10005747
Manufacturer Part Number 731-0851A
This chute flange keeper is sourced from the original equipment manufacturer for use in snowblowers. The plastic keeper allows the snowblower chute to pivot, and secures the flange that connects the chute to the blower frame and holds it in place during use. Over time the flange keeper can break or fall off, which causes the chute to dislodge or shift from its position. If you notice that debris is discharged in the wrong direction, and you have difficulties adjusting the chute then this is a sign that the flange keeper is no longer functioning as it should. Clean the chute flange and surrounding area before placing the new keeper on. Use a pair of pliers to align the the holes on the flange keeper with the holes on the chute and lock it in place.
Edger Brands
- Echo Edger
- Husqvarna Edger
- Kawasaki Edger
- MTD Edger
- Poulan Edger
- Shindaiwa Edger
- Troy-Bilt Edger
- Weed Eater Edger
Related Edger Parts
- Edger Bearings
- Edger Blades
- Edger Brackets and Flanges
- Edger Caps and Lids
- Edger Carburetors
- Edger Engines
- Edger Filters
- Edger Handles
- Edger Hardware
- Edger Hoses and Tubes
- Edger Knobs
- Edger Manuals and Literature
- Edger Seals and Gaskets
- Edger Spark Plugs
- Edger Springs and Shock Absorbers
- Edger Starters
- Edger Transmissions and Clutches
- Edger Wheels and Rollers
- Edger Wire Plugs and Connectors
Popular Edger Models
Below are the most popular Edger models we have. Enter your model number in the search box to find your model.
- 128LD 128 Ld - 20093100001-Current (Us_can)
- 128LD 128 Ld - 952711953 (Us_lowes)
- 128LD 128 Ld - 952711969 (Us_can)
- 970 Electric Edger
- 128CD 128 Cd - 952711952 (Us Only)
- 128CD 128 Cd - 952711968 (Us_can)
- 224L 224 L
- PE550 Gas Edger
- PE550 Gas Edger
- PE550 Gas Edger
- PE550 Gas Edger
- PE550 Gas Edger
- 123L 123 L
- UT13140 4-Cycle Lawn Edger
- PWLE0799 79cc 4-Cycle Lawn Edger
- 322L 322 L (20000100001-20020100000)
- 322L 322 L (20020100001-20150100000)
- 322L 322 L (19991000001-20000100000)
- 323L 323 L (20041000001-20051800000)
- 323L 323 L (20061400001-20070100000)
