Hotpoint Refrigerator Hinges

Videos!

Your Price

$47.42

Hotpoint Refrigerator Bottom Hinge Assembly

★★★★★

26 Reviews

PartSelect Number PS290199

Manufacturer Part Number WR13X10020

Comes with both cam risers. This hinge kit is suitable for the bottom of either the freezer door or the refrigerator door of some refrigerators.

Fixes these symptoms

Clicking sound
Door Sweating
Door won’t open or close
See more...

Installation Instructions

Larry from Clinton, SC

The refrigerator door side of the side-by-side refrigerator/freezer, bottom cams that auto close the door were broken.

First, I removed all items on the door shelves and the shelves themselves to reduce the weight of the door. Second, I removed the cover on the top hinge assembly and removed the two screws that secured that hinge. Third I lifted the door from the bottom hinge assembly and placed the door horizontal on the kitchen table to all easier access to the bottom of the door. I then removed two screws holding the door closing cam and shim and replaced them with the new parts. Next was to removed the old hinge assembly on the refrigerator itself and replace it with a new hinge assembly. All down hill from this point. Time to reinstall the door, aligning the bottom of the door cam over the hinge assembly and setting the door down on it making sure the door sets on the hinge assembly cams. To the top of the refrigerator. reinstalled the top door hinge assembly and cover, job complete. Total time from start to finish including cleaning the inside of the door and shelves about 30 minutes.

As for the replacing of the light lens in the freezer section. This was almost to easy. I removed the ice drawer from the freezer which exposed the one phillips screw that holds the lens in place. Removed the screw and what was left of the old lens, inserted the new lens from the underneath the ice drawer compartment and screw, replaced the ice drawer and, the task was complete. Total time about 5 minutes. Read more...

Videos!

Your Price

$25.50

Hotpoint Refrigerator Door Closing Cam

★★★★★

18 Reviews

PartSelect Number PS297995

Manufacturer Part Number WR2X4901

This single door closure cam is mounted on the door, not the hinge.

Fixes these symptoms

Clicking sound
Door Sweating
Door won’t open or close
See more...

Installation Instructions

Gary from North eastham, AL

Door would not automatically close.

Symptom: Door did not close automatically. Also had found small chunks of black plastic on the floor. Refrigerator door was slightly lower than the freezer door.

One false start because I did not realize both of the door-closing cams had disintegrated and I had only ordered the cam without the hinge.

Purchased part 290199 Hinge Assembly. It came with matching door-closing cam. (Had not known so I also purchased the cam 297995 separately). Next time I will know to only purchase the Hinge Assembly.

Replacement procedure took about 20 minutes including removing and replacing door shelves and their contents. Two people involved.

1. Remove all door shelves with contents and other contents on door.

2. Remove the top Phillips head screw holding the decorative plastic on the top.

3. Remove the two top hinge screws on top of refrigerator using metric #8 socket wrench. Second person made sure door did not fall off.

4. Lift the door off the bottom hinge pin. Second person holds door on it’s side.

5. Take off the bottom refrigerator cover

6. Remove the bottom hinge assembly screws using metric #8 socket wrench.

7. Mount the replacement bottom hinge assembly and tighten the two screws.

8. On the door bottom, remove the outer screw and loosen the inner screw using metric #8 socket wrench.

9. Replace the door-closing cam (or what is left of it) with the cam in line with the door and cam bumps away from the door.

10. Place the door back on the hinge pin (one person holds while the other person maneuvers the door bottom).

11. Replace the top hinge and reinsert the screws on top of the refrigerator. Dress the door so that it does not press hard on the rubber door gaskets (or the door will fail to shut automatically). Tighten the screws.

12. Replace the decorative plastic over the top hinge.

13. Open the door and replace the bottom refrigerator cover.

14. Replace the door shelves and all contents.

15 Close the door. Read more...

Your Price

$19.55

Hotpoint Refrigerator Door Stop - black

★★★★★

2 Reviews

PartSelect Number PS285193

Manufacturer Part Number WR02X10782

This part is the replacement door stop for your refrigerator. It is made of black plastic and is approximately 2 inches by 1 ½ inches in size. The door stop attaches to the bottom of the door and prevents it from swinging open and hitting the refrigerator cabinet. If your door opens too far, or opens with little resistance, it could be an indication that you need to replace the door stop. You will also want to replace the door stop if it is cracked, broken, or missing. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Fixes these symptoms

Door won’t open or close
See more...

Installation Instructions

Darrell from Long Beach, CA

door stop broken from fatigue

using a small socket wrench and star shaped driver I (1) removed the two screws that held the broken stop from the bottom of the door, and (2) replaced the new stop and screwed it back in. The most difficult part of the job was opening the door in order to access the second screw. Read more...

Your Price

$25.55

Hotpoint Refrigerator Fresh Food Lever

★★★★★

6 Reviews

PartSelect Number PS288340

Manufacturer Part Number WR11X10009

This part is the replacement fresh food lever for your refrigerator. It is also known as the door closer lever, and it is made of black plastic. It is approximately 3 inches long and 1 inch wide. The fresh food lever works with the cam and the spring and helps with the opening and closing of the door. If the lever is damaged and the door assist isn’t working properly, you may need to replace it. You will find the lever at the bottom of the refrigerator, behind the grate. This part is sold individually and is an OEM part.

Fixes these symptoms

Door won’t open or close
See more...

Installation Instructions

Dennis from AUSTELL, GA

Fresh Food lever, under door, missing roller, make loud sound when closing door.

Removed tension spring, removed old lever, installed spring on lever, inserted lever in hole, re-attached spring to hook under front of refrigerator. Read more...

Videos!

Your Price

$11.61

Hotpoint Refrigerator Hinge Cam Riser

★★★★★

6 Reviews

PartSelect Number PS284596

Manufacturer Part Number WR02X10140

This part helps with the closing of the door and helps keep it in position.

Fixes these symptoms

Door Sweating
Door won’t open or close
See more...

Installation Instructions

Larry from Clinton, SC

The refrigerator door side of the side-by-side refrigerator/freezer, bottom cams that auto close the door were broken.

First, I removed all items on the door shelves and the shelves themselves to reduce the weight of the door. Second, I removed the cover on the top hinge assembly and removed the two screws that secured that hinge. Third I lifted the door from the bottom hinge assembly and placed the door horizontal on the kitchen table to all easier access to the bottom of the door. I then removed two screws holding the door closing cam and shim and replaced them with the new parts. Next was to removed the old hinge assembly on the refrigerator itself and replace it with a new hinge assembly. All down hill from this point. Time to reinstall the door, aligning the bottom of the door cam over the hinge assembly and setting the door down on it making sure the door sets on the hinge assembly cams. To the top of the refrigerator. reinstalled the top door hinge assembly and cover, job complete. Total time from start to finish including cleaning the inside of the door and shelves about 30 minutes.

As for the replacing of the light lens in the freezer section. This was almost to easy. I removed the ice drawer from the freezer which exposed the one phillips screw that holds the lens in place. Removed the screw and what was left of the old lens, inserted the new lens from the underneath the ice drawer compartment and screw, replaced the ice drawer and, the task was complete. Total time about 5 minutes. Read more...

Your Price

$24.70

Hotpoint Refrigerator Freezer Lever - Black

★★★★★

2 Reviews

PartSelect Number PS288341

Manufacturer Part Number WR11X10010

Fixes these symptoms

Door won’t open or close
See more...

Installation Instructions

James from Jacksonville, FL

Freezer door lever broke

Unscrew the two mounting screws for the plastic vent plate on the bottom of the SS unit and take the remove the vent. Next, slide the end of the lever through the square hole in the bottom bracket and attach the hook end of the lever to one end of the lever spring. Pull on the other end of the lever spring and slip it over the spring mount finger that is a part of the bottom bracket frame. Finally,reattach the plastic vent plate with the 2 mounting screws. Total repair time was less than 15 minutes. Read more...

Your Price

$14.48

Hotpoint Refrigerator Door Closing Cam

★★★★★

1 Review

PartSelect Number PS285190

Manufacturer Part Number WR02X10779

This part is the replacement door closing cam for your refrigerator. It is black in color and is approximately 2 inches by 1 ½ inches in size. The door closing cam raises the door to keep it from touching the refrigerator lining, and helps with the door opening and closing. If your door won’t open or close, or the door assist isn’t working, it could be an indication that you need to replace the door closing cam. You will also want to replace the door closing cam if it is cracked, broken, or missing. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Fixes these symptoms

Door won’t open or close
See more...

Installation Instructions

David from Cary, NC

Fridge Door would not close "automagically"

I had to remove the fridge door (side by side), which took approximately 10min (most of which was retrieving the right size socket wrench from the garage). With the door removed, I could replace the broken door closing cam and door stop... with 4 screws. Not much to it. Had the door mounted back on in another 5min and that was it. :) Read more...

Your Price

$8.08

Hotpoint Refrigerator Hinge Cam Riser

PartSelect Number PS963526

Manufacturer Part Number WR02X11743

This is needed to auto-close the door and to keep it from opening too far.

Fixes these symptoms

Door won’t open or close
See more...

Your Price

$13.78

Hotpoint Refrigerator Door Stop - Black

★★★★★

4 Reviews

PartSelect Number PS3487734

Manufacturer Part Number WR02X13425

This is the replacement door stop, also known as a door stop bracket, for your refrigerator. It is made of black plastic, and is approximately 3 inches long and 1 inch wide. The door stop bracket stops the door from opening more than approximately 90 degrees. The stop can occasionally break, and this will allow the door to open more than 90 degrees. When this occurs, you will need to replace the door stop. This part is sold individually and is an OEM part.

Fixes these symptoms

Door won’t open or close
See more...

Installation Instructions

David from Cary, NC

Fridge Door would not close "automagically"

I had to remove the fridge door (side by side), which took approximately 10min (most of which was retrieving the right size socket wrench from the garage). With the door removed, I could replace the broken door closing cam and door stop... with 4 screws. Not much to it. Had the door mounted back on in another 5min and that was it. :) Read more...