This Drive Belt is 89.5" long and comes in black, featuring four ribs on the inside for a better grip. This is a long belt that wraps all the way around the dryer drum, around a tension pulley, and th...
This rear drum bearing kit includes a shaft, ground strap, bearing, seven screws, and installation instructions. The bearing plate comes with a slot in it for the ground strap. This part helps keep yo...
This drum glide bearing is an authentic OEM replacement part that is compatible with dryers. It is white in color and made of highly durable plastic. The bearing allows the drum to rotate smoothly and...
This OEM replacement dryer slide bearing is white in color, and approximately 3 inches long. The slide bearings are supportive linings for your dryer. If they have eroded, or are damaged, the drums wi...
This door latch is designed for your dryer, and is mounted to the dryer frame. The door latch holds the door of your dryer closed while the machine is operating. If your dryer door is not catching on ...
The interlock switch may also be referred to as a belt switch. This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open. This is a part for your dryer. ...
This lid switch with wire harnesses is used in washing machines. The pin on the lid switch pushes onto the lever of the switch to communicate to the machine that the washer lid is closed. If your wash...
TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the...
This is a door handle made for use with dryers. This door handle is made of solid white plastic and allows you to open and close the door of the dryer. If your current dryer door handle is broken or m...
$71.04
In Stock
Questions And Answers for 2661532413
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Juan
January 3, 2020
How can i access the cycling thermostat
For model number 2661532413
Hi Juan, please watch our video here: https://www.youtube.com/watch?v=P8Jtyh8h2kw&feature=emb_title. Thank you for your question and good luck with your repair!
Morning my dryer works perfectly fine on the stackable but washer does not turn on at all.
For model number 2661532413
Hi Stephen, thank you for reaching out. Based on the description that you have provided, we would recommend replacing the lid lock, part number PS3496878, to solve the problem. It prevents the washer lid from opening during the wash cycle and spin cycle. The washer will not start if your door is not locked. We hope that helps!
I had asked a prior question and they mentioned I needed the lid lock assembly. Please note that with lid open I was able to fill with water and if lid was not closed when the fill cycle ended it would not agitate. My issue is that it will not fill at all and there is no lights on the switch assembly. Do you think it is my start switch with the led that is defective or the lid lock.
For model number 2661532413
Hi Stephen, thank you for getting in touch. We have researched and concluded that the issue is with the pressure switch, part number PS7320331. It senses and controls the water level in the washer. We would recommend replacing the pressure switch to fix the issue. Good luck with your repair!
Hi Terrance, thank you for contacting us. You may need to check the lid lock and switch assembly, part number PS3496878, to fix the issue. The door latch lid lock is to lock the door on your washer when the appliance is in use. Your washer will not start or stop mid cycle if your door is not locked. We hope this solves your problem!
After removing frt panel which prys off I checked for anything obvious like a loose belt. Then I jiggled the magnet switch located on the inside of the loading cover. I saw the machine start agitating the it stopped again when I stopped touching it. I ordered the new part and spliced it in with the wire crip tool. Now the machine is A ok.
Removed the front Dryer panel. Left drum in place and lifted it up slightly to get access to motor drive. Slipped belt in place and put panel back on. This was a first attempt ever at fixing an appliance and it was no big deal.
It was actually my father, he doesn't use the internet. He thought that because the dyer got real hot and then shut off he thought the thermostat wasn't working and the high temp shutoff was okay. He went through the manual and found the part and took it out. He called the service number but they wanted $50 dollars plus shipping. I saw it
... Read more was a Thermo-disc part so I tried the manufacture's website but I couldn't match the numbers on the back to their part numbers. I tried several other sites and your site was the cheapest. It was real easy to use the web site and diagrams to find the right schematic and part. I ordered it online and it was delivered in 2 days with the regular shipping. When he first put it in the dyer didn't turn on. He found no power coming out of the timer so he cleaned the contacts and it worked. Thanks for making the ordering so easy.