This is lid lock designed for use within various washing machines. This lid lock, also known as a latch assembly, is used to secure the lid of your washing machine during the washing cycle. If your wa...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
This knob is a genuine OEM replacement part used in dryers. It is a white, plastic knob found on the front panel on the dryer. It allows users to choose the drying cycle, adjust temperature settings, ...
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
This is a lid strike for various models of top-load washing machines. Lid strikes are designed to engage with the lid switch and communicate to the control board that the washer can start. If your was...
The drain hose carries used water from the washer to your house drain.
$24.99
In Stock
Questions And Answers for 2DWTW4705EW1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dennis
September 5, 2021
Machine not turning on, no lights on the panel.
For model number 2DWTW4705EW1
Hello Dennis, Thank you for the question. We suggest testing the Outlet the appliance is plugged into and checking the Power Cord. If they are good, the Control Board could be defective. We hope this helps!
Hello Beverly, thank you for the question. According to our research, we are providing you with general instructions that will help you reset your washer.
1- Turn the washing machine off manually.
2- Locate the washing machine’s circuit breaker in your house’s electric panel.
3- Lift the circuit breaker. This will disconnect the power from the washing machine.
4- Wait for 3 minutes.
5- Reset the circuit breaker to bring power back to the appliance.
6- Wait 30 seconds.
7- Turn the machine on at the control panel.
We hope this helps!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
unfasten top from back, slide top forward and lift up, remove switch and cable (one piece), in stall new switch and cable, put top down and slide back, reinstall screws.
