Make sure you haven't got the discount earlier.
Parts That Fix Speed Queen Dryer ADE3LRGS171TW01 Marks left on clothes
Marks left on clothes is a commonly reported symptom for the ADE3LRGS171TW01 Speed Queen Dryer, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your ADE3LRGS171TW01 Speed Queen Dryer that will fix Marks left on clothes. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
This cylinder felt seal is used in dryers and is located between the back of the drum and the rear dryer panel. If your dryer is experiencing any of these symptoms, replacing the felt seal could solve your problem: squealing or banging noise, clothes are getting stuck between tub and felt pad, takes too long to dry, not heating enough or not heat at all, or does not tumble. The tools needed for this installation are a 5/16 nut driver and a putty knife. Make sure to unplug the dryer from the power source before beginning this project. Refer to the manual provided by the manufacturer for further instructions.
Replacing your Speed Queen Dryer Cylinder Felt Seal
Customer Repair Stories
Worn Felt Seal
-
robert from hillsborough, NC
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
Cylinder Seal came out
-
Marcia from Hammond, LA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers