Models > JGBS66REK1SS > Symptoms > Will Not Start

Parts That Fix General Electric Range JGBS66REK1SS Will Not Start

Will Not Start is a commonly reported symptom for the JGBS66REK1SS General Electric Range, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your JGBS66REK1SS General Electric Range that will fix Will Not Start. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!

1 SPARK MODULE 6+0 KIT
Fixes Symptom 99% of time
SPARK MODULE 6+0 KIT – Part Number: WB13X26360
★★★★★
★★★★★
2 Reviews

Rated by 4 customers 

  

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.   

$ 58.56
  In Stock
PartSelect Number PS11729094
Manufacturer Part Number WB13X26360

Customer Repair Stories

Part does not look like the part that needs to be replaced

I have no clue what wire goes where because there is no thing to refer to or instructions of any kind . I have not been able to install the part.
  • P from FULLERTON, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!

One burner would not light from spark. All other burners lite with spark.

First I checked that the wire and sparker was working by switching the wires on top of the range. I did this by pulling out the sparker switching it from the back working burner on the same side. The same burner would not light so I knew it was not the sparker.

Then watch a bunch of videos and found this gal to be the most helpful on how to take apart my exact stove.
Go here: https://www.youtube.com/watch?v=WRGfuhUzEaY

I did not take everything apart like she did. I ordered the spark module and just replaced it following her method to take off the back, switch the wires to the new module, then put everything back together again.

All burners have been working perfectly since the fix.
Read less
  • Thomas from DEARBORN, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top