Make sure you haven't got the discount earlier.
Parts That Fix Maytag Washer MAH4000AWW Burning smell
Burning smell is a commonly reported symptom for the MAH4000AWW Maytag Washer, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your MAH4000AWW Maytag Washer that will fix Burning smell. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
This kit contains a flat drive belt, two motor isolators, and an instructions sheet. The drive belt is made to slip on the pulley until the basket gets up the desired speed.
Replacing your Maytag Washer Drive Belt and Motor Isolator Kit
Customer Repair Stories
Drive belt sqeaked and contiued to roll off the drum.
-
Douglas from Marion, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Belt wore off and broke
-
DANIEL from WEST CHESTER, PA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Wrench (Adjustable)
This wax motor is just over two inches long. It is used on some older style washing machines.
Customer Repair Stories
Spin action failed because the door did not lock
-
Michael from Austin, TX
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers, Wrench (Adjustable)
Door lock light and spin cycle wouldn't work. The tub would drain but left clothes wet.
-
Janice M from Omak, WA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers