This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
This door strike is an authentic OEM replacement part that is compatible with various models of top-load washing machines. The door strike is located along the door frame, where it engages with the la...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
This 6-pin shift actuator is an authentic OEM part supplied directly by the manufacturer for use in washing machines. The shift actuator is responsible for controlling the movement of the washer trans...
This is a water inlet valve made for washing machines. This part is used to control the flow of water into the fill hose of the washing machine, to allow the washer to fill up with water. If your wash...
This agitator assembly is an authentic OEM part that is compatible with various models of washing machines. It consists of a central shaft with a series of fins attached to it. When the washer is oper...
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
This lid lock assembly is specially designed for top load washing machines. It is a genuine OEM part that is guaranteed to fit like the original. It includes the lid lock switch and the wiring harness...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alicia
March 7, 2023
Washer won't drain and spin. stops before it gets to the cycle. If I put it on drain and spin nothing happens. Hose is not clogged. Have a pump coming today to try, If it isn't the pump what is the nest thing I should try?
For model number MVW6230HC0
Hello Alicia, thank you for the question. According to our research, we suggest checking the lid lock assembly, part number PS12731130. If this is fine, we recommend inspecting the drive pulley, part number PS10057144. If this is bad or broken, replace it. We hope this is helpful!
Washer does not drain. Drain hose is clear and not blocked, the only way I can drain it is to take the drain hose off
For model number MVW6230HC0
Hello Jamie, thank you for contacting us. Based on the description that you have provided, we would recommend replacing the drain pump, part number PS12731177, to fix the issue. We hope this solves your problem!
When starting a new load, the washer does a leveling process. Almost every time this happens, it makes a very loud, high-pitched squeal. Like sneakers on a basketball court - only louder and for a full second or more. It only does this once, at the start of a new load. Not at any other time in the cycle. Any idea what is going on?
It's as though the brake is left partially engaged from the prior load.
For model number MVW6230HC0
Hi Bob, thank you for reaching out. Based on our understanding, we would recommend checking that the load is evenly distributed between both sides of the washer before setting up its cycle. If the issue persists, you may need to replace the drive belt, part number PS12578772. We hope that helps!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Pushed in on door strike and rotated it counterclockwise, removed broken strike and installed new strike. NOTE: when removing the old strike (turning counterclockwise) it felt like it might break and/or was attached with an screw that I didn't see but it came right out.