Models > MWM6600RW

MWM6600RW Haier Range - Overview

Sections of the MWM6600RW

[Viewing 1 of 1]
Diagram and Parts List for Haier Range

Exact Part matches for your search term

[Viewing 1 of 1]
MWM6600RW:0.6 CU.FT./600 WATT – Part Number: MWM6600RW
MWM6600RW:0.6 CU.FT./600 WATT
This part number matches the current model number MWM6600RW
PartSelect #: PS17240910
Manufacturer #: MWM6600RW
  No Longer Available
Keep searches simple, eg. "belt" or "pump".
MICRO SWITCH(STAND ON) – Part Number: WB24X10146
MICRO SWITCH(STAND ON)
PartSelect #: PS1019163
Manufacturer #: WB24X10146
$36.19
  In Stock
TRAY MOTOR – Part Number: WB26X10252
TRAY MOTOR
★★★★★
★★★★★
(2)
PartSelect #: PS3486610
Manufacturer #: WB26X10252
$51.65
  In Stock
CAPACITOR - H.V. – Part Number: MW-1400-14
CAPACITOR - H.V.
PartSelect #: PS4111064
Manufacturer #: MW-1400-14
  No Longer Available
COUPLER – Part Number: MW-1940-01
COUPLER
PartSelect #: PS4111128
Manufacturer #: MW-1940-01
  No Longer Available
DIODE - H.V. – Part Number: MW-2200-17
DIODE - H.V.
PartSelect #: PS4111220
Manufacturer #: MW-2200-17
  No Longer Available
KNOB – Part Number: MW-4000-14
KNOB
PartSelect #: PS4111470
Manufacturer #: MW-4000-14
  No Longer Available
MAGNETRON – Part Number: MW-4450-20
MAGNETRON
PartSelect #: PS4111536
Manufacturer #: MW-4450-20
  No Longer Available
MOTOR - FAN – Part Number: MW-4550-28
MOTOR - FAN
PartSelect #: PS4111563
Manufacturer #: MW-4550-28
  No Longer Available
RING – Part Number: MW-5800-25
RING
PartSelect #: PS4111730
Manufacturer #: MW-5800-25
  No Longer Available
SWITCH - MICRO INTER – Part Number: MW-7100-34
SWITCH - MICRO INTER
PartSelect #: PS4111903
Manufacturer #: MW-7100-34
  No Longer Available
TIMER – Part Number: MW-7400-06
TIMER
PartSelect #: PS4111931
Manufacturer #: MW-7400-06
  No Longer Available
TRANSFORMER - H.V. – Part Number: MW-7550-22
TRANSFORMER - H.V.
PartSelect #: PS4111960
Manufacturer #: MW-7550-22
  No Longer Available
View More
Back to Top

Questions And Answers for MWM6600RW

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
the cover for the tray motor was attached to the bottom cover at 6 points. they were 3mm to 4mm long.
I used small wire cutter I use in fly tying hobby. The metal was easy to cut. When cover was removed I unplugged the motor,removed it and plugged the new one in.
To replace the cover -- reverse it,place the 2 tabs on one edge into the slots that are already part of the base. On the opposite edge there is a domed shaped tab with a hole in center. Place the small screw that was provided back in and thighten.
Your Done
Read less
Parts Used:
TRAY MOTOR
  • James A from SILVERDALE, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top