This burner knob is a manufacturer-approved replacement part for your stove. It is chrome in color. Having a working knob allows you to correctly dictate the stovetop temperature. This is a very easy ...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
June 4, 2022
When I try to light either of the 2 burners on the left, it starts clicking(igniting) on the top right burner.
So I have to use a lighter to light the left 2 burners. It hasn’t always done this.
For model number PGP990SEN1SS
Hello Chris, Thank you for your inquiry. We have researched the model number that you have provided and it could be an issue with the igniter or the spark module assembly. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
I unscrewed the burners which was three screws per burner then removed gas control knobs and pulled up range top and un hooked the old module and replaced it with the new one two screws hold it in place and connected it the same way the old one was and put range back together and now it works perfect and saved me over $250.00 and part onl
... Read morey coated around $40 with shipping great parts seller and I highly recommend partselect.com very easy fix thanks
Unplug the the electrical plug from outlet, removed the stainless steel top cover by removing 8 screws with a Philips screw driver, removed the old 4-burner ignition switch harness and replace with the new harness, then reconnect wires to the spark modulator. It was very straight foreword. The problem was remedied.
( I will no
... Read morete that in problem solving). The two components had to be ruled out for the burner to fail was either the spark modulator under the cooktop or the 4- burner ignition switch harness witch is located under the cover where the knobs are. The switches are one unit and if one goes out you replace all four. It requires no tools they slip out and snap back in the stem of the knob once the cover is removed.