This is a top limit directional switch for a trash compactor. The directional switch reverses the motor direction when the trash compactor has reached the top of the drawer. If your trash compactor is...
This power nut assembly is made to be used in conjunction with your trash compactor. It comes with five pieces that include the two mounting pins, two clips, and the new power nut. This piece is beige...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom
January 31, 2024
Motor runs but the shaft does not go up and down.
For model number UCG1520N0SS
Hi Tom, thank you for contacting us. Based on the description, the issue is probably with the drive gear and shaft kit, part number PS12743163. If the drive gear is worn out or not securely fastened to the drive shaft, the motor may continue running, but the ram will not move up or down. We would recommend replacing the drive gear and shaft kit to fix the issue. We hope this solves your problem!
Removed compactor from opening. Using screw driver unthreaded 4 screws from top and then removed the on/off dial. Face plate came off easy and provided access to relay switch bank. Unscrewed two screws which allowed both relay switches to be removed and replaced. Recommend replacing both relay switches. Reassembled and compactor work
... Read moreed fine. Very easy job. If your compactor is making a machine gun noise during the return cycle then this will solve your problem.
Followed YouTube instructions. Was relatively easy to dismantle, though on this GE Profile model compactor, needed to partially undo the front panel to provide room to remove the RAM. Works great now!!