Models > W25SBK

W25SBK Weed Eater Trimmer - Overview

Sections of the W25SBK

[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Assembly-Fuel Tank – Part Number: 581263701
Assembly-Fuel Tank
★★★★★
★★★★★
(1)
PartSelect #: PS9982318
Manufacturer #: 581263701
This fuel tank is for lawn and garden equipment engines. Fuel tank holds the gas that's needed by the engine. Work in a well-ventilated area when installing this part. Drain the existing fuel f...
$17.43
  In Stock
Trigger – Part Number: 530058000
Trigger
★★★★★
★★★★★
(1)
PartSelect #: PS9969962
Manufacturer #: 530058000
$6.62
  On Order
Assembly,Fuel Cap – Part Number: 579746601
Assembly,Fuel Cap
★★★★★
★★★★★
(2)
PartSelect #: PS9981997
Manufacturer #: 579746601
$6.62
  On Order
Ignition Module – Part Number: 578287001
Ignition Module
★★★★★
★★★★★
(2)
PartSelect #: PS9981837
Manufacturer #: 578287001
$18.68
  In Stock
Spring-Starter – Part Number: 545008014
Spring-Starter
PartSelect #: PS9482323
Manufacturer #: 545008014
$7.46
  In Stock
Cover – Part Number: 545003365
Cover
PartSelect #: PS9482287
Manufacturer #: 545003365
This OEM spool cover is designed to protect your trimmer spool and keep it free from damage and debris. It securely holds the trimmer line in place, preventing it from unraveling while you operate the...
$13.69
  In Stock
Air Box – Part Number: 580731001
Air Box
PartSelect #: PS12123398
Manufacturer #: 580731001
$3.99
  On Order
Kit-Starter Pulley – Part Number: 545050407
Kit-Starter Pulley
PartSelect #: PS9482436
Manufacturer #: 545050407
$21.22
  In Stock
Kit, Drive Shaft – Part Number: 545008061
Kit, Drive Shaft
★★★★★
★★★★★
(1)
PartSelect #: PS9976859
Manufacturer #: 545008061
$27.40
  In Stock
Kit D Shaft Lower Shaft Kit – Part Number: 581494903
Kit D Shaft Lower Shaft Kit
PartSelect #: PS11843479
Manufacturer #: 581494903
$32.36
  In Stock
Kit- Piston – Part Number: 530071833
Kit- Piston
PartSelect #: PS9970592
Manufacturer #: 530071833
$43.76
  In Stock
Assembly-Fuel Pick Up – Part Number: 577167201
Assembly-Fuel Pick Up
PartSelect #: PS11969588
Manufacturer #: 577167201
$3.99
  In Stock

Questions And Answers for W25SBK

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Clogged muffler
Remove the 4 screws holding the rear motor casing. Then you can take the easy route and drill through the front motor housing with a 3/8 to 1/2 bit in order to access the front muffler screw. If you want to work harder you must remove the motor from the shaft, remove the clutch assembly (this requires a long 15t torx bit, removing the spark plug to stuff the piston with rope or rag to seize up the piston, and then removing the front motor casing to access the front muffler screw). Once you access both muffler screws remove them with the t20 torx driver. Install the new muffler with the small gasket inside the housing, and the larger gasket/heat shield between the muffler and the motor.
Parts Used:
Assembly-Muffler/Shield
  • Rosanne from BRIDGEWATER, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no spark
replaced ignition module from you ,which works
Parts Used:
Ignition Module
  • William from BEAVER MDWS, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!