Part Location Diagram of W11683242 Whirlpool LED MODULE SERVICE KIT, CHROME
See part 3 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

LED MODULE SERVICE KIT, CHROME W11683242

 Fits your KRMF706ESS01!
★★★★★
★★★★★
10 Reviews

Rated by 7 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 368.41
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your KRMF706ESS01!
PartSelect Number PS17216452
Manufacturer Part Number W11683242
Manufactured by Whirlpool
Troubleshooting
This part fixes the following symptoms:
Light not working
This part works with the following products:
Refrigerator.
This part works with the following products:
KitchenAid, Jenn-Air, Whirlpool.
Part# W11683242 replaces these:
W10559034, W10607479, W10623957, W10637315, W10843339, W10908166, W11462342
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
10 Reviews
4.5
Filter By Rating:
  • 5 Stars
    8
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.2 / 5.0, 7 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
All Freezer LED lights and one light out in the fridge.
There is a good YouTube vid on how to extract the old LED without damaging the liner of the appliance. (Use a one inch plaster spatula and some blue painters tape). VERY IMPORTANT: The freezer LEDs and the one that was out in the fridge compartment are in series on the same circuit. I found out by trial and error after a frustrating start. If one or two are bad they all go out like a christmas light string. So be patient and keep replacing bulbs until they all come on. Then you can test each one you took out to see if it was bad or not by putting it back online. At first I was annoyed that Part Select may have sent the wrong replacement items but they were in fact correct. These bulbs are not cheap so make sure the ones you take out are truly burned out.
  • Kenneth from SPRING, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the lights was out and all lights would blink
Put One card in one side and other card on the opposite side, push in on both sides to press in clips that hold light in. Once clips are in light will start to come out unplug light and plug in new light. Push light back in.
  • RONALD from WALL TOWNSHIP, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
LED behind upper compartment of freezer failed
The hard part was getting the OLD fixture out. They tell you to protect the surface around it with tape, but try sticking tape to a freezing cold surface with water condensing on it! And it's so firmly snapped in place that it takes a putty knife and screw driver to push the prongs back to get it loose. Finally, the fixture is on the ceiling behind the icemaker so very awkward working conditions, plus and you can't see well because ALL of the lights are out (remember, they're in series). To see I had to prop my phone up at just the right angle to shine its little light on the area.

But getting it in was literally a snap. Just snap the couplings together, carefully push the wires into the empty space and slide the rear prongs in, then snap the front ones in simply by pushing the whole fixture firmly. Then pat yourself on the back!
  • Matthew from ALTOONA, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
10 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator lights out
I think the lights are wired in series. When the light in the freezer goes bad several lights in the refrigerator go out but are still good. Replace the lamp in the freezer and all the lights in the refrigerator work again. The only tools I used was a 1" scraper and a very small flat screwdriver to pop the lamp assembly out. Not much room to work in so it was a bit of a job getting the wire connector where it needed to be but not to bad..
  • Stephen from EGG HBR TWP, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light out inside fridg.
Put painters tape next to light, so I wouldn't scratch surface. Worked edge of light down and out of hole with small screwdriver. Chechen wireing , light might work ? Unplugged light assembly . Plugged in new light , and reinserted light into opening . Removed tape ,, done. You can use putty knife in place of screwdriver. Be patient. Google helps also.
  • William from N MYRTLE BCH, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top Lights stopped working. Flicker on/off for a second but remain off
Isolate the broken LED light fixture by pressing the door switch and releasing it; broken light will remain off and not flicker. Unplug refrigerator and apply painter's tape around the light fixture to protect surface finish from being marred or scratched. Use the putty knife to remove the LED light and disconnect the wiring from connector. Reconnect wire of new part and install by pressing light fixture in place. Remove tape and plug refrigerator back in.
  • Mark from EDMOND, OK
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the lights was out and all lights would blink
Replaced the light that was out.
Problem fixed
  • RONALD from WALL TOWNSHIP, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

2 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Daniel
November 21, 2023
all of the interior LED lights are out, yet when I cut the power to the unit for 30 sec. and then turn it back on, all the lights come on when the door is opened, but only for a short time, then they all go out again. This process will repeat itself when the power is cut off and on. I'm guessing the LED module.
For model number kbfn502ess00
PartSelect logo
Hi Daniel, Thank you for your question. If the lights inside the refrigerator do not come on, usually replacing a light in the freezer compartment will resolve the issue. The part number for the LED light is PS16218086. We hope this helps!

Was this helpful?
Thank you for voting!
Douglas
April 11, 2024
All the led lights in my freezer and one in the refrigerator section dimmed all at the same time. Is this likely a control board problem or a problem with the led lights. just seems weird that they all go at one time.
For model number JS48NXFXDE01
PartSelect logo
Hello Douglas, thank you for reaching out. If one light fails, many others also fail, because they are wired in series. We would recommend replacing the LED Light, part number PS17216452, to fix the issue. We hope this helps, good luck with this repair!

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS17216452
Manufacturer Part Number: W11683242
Brand
Model Number
Description
Jenn-Air
JB36NXFXLE00
Refrigerator - REFRIGERATOR
Jenn-Air
JB36NXFXLE01
Refrigerator - REFRIGERATOR
Jenn-Air
JB36NXFXRE00
Refrigerator - REFRIGERATOR
Jenn-Air
JB36NXFXRE01
Refrigerator - REFRIGERATOR
Jenn-Air
JF36NXFXDE00
Refrigerator - REFRIGERATOR
Jenn-Air
JF36NXFXDE01
Refrigerator - BOTTOM
Jenn-Air
JF42NXFXDE00
Refrigerator - REFRIGERATOR
Jenn-Air
JF42NXFXDE01
Refrigerator - REFRIGERATOR
Jenn-Air
JF42NXFXDE02
Refrigerator - BOTTOM
Jenn-Air
JS42NXFXDE00
Refrigerator - REFRIGERATOR
Jenn-Air
JS42NXFXDE01
Refrigerator - SIDE
Jenn-Air
JS42PPDUDE00
Refrigerator - BUILT-IN REFRIGERATOR
Jenn-Air
JS42PPDUDE01
Refrigerator - REFRIGERATOR
Jenn-Air
JS42SSDUDE00
Refrigerator - BUILT-IN REFRIGERATOR
Jenn-Air
JS42SSDUDE01
Refrigerator - REFRIGERATOR
Jenn-Air
JS48NXFXDE00
Refrigerator - REFRIGERATOR
Jenn-Air
JS48NXFXDE01
Refrigerator - SIDE
Jenn-Air
JS48PPDUDE00
Refrigerator - REFRIGERATOR
Jenn-Air
JS48PPDUDE01
Refrigerator - REFRIGERATOR
Jenn-Air
JS48SSDUDE00
Refrigerator - REFRIGERATOR
Jenn-Air
JS48SSDUDE01
Refrigerator - SIDE
KitchenAid
KBBL206EPA00
Refrigerator - REFRIGERATOR
KitchenAid
KBBL206EPA01
Refrigerator - REFRIGERATOR
KitchenAid
KBBL206ESS00
Refrigerator - REFRIGERATOR
KitchenAid
KBBL206ESS01
Refrigerator - REFRIGERATOR
KitchenAid
KBBL306EPA00
Refrigerator - REFRIGERATOR
KitchenAid
KBBL306EPA01
Refrigerator - REFRIGERATOR
KitchenAid
KBBL306ESS00
Refrigerator - BUILT-IN BOTTOM MOUNT REFRIGERATOR
KitchenAid
KBBL306ESS01
Refrigerator - REFRIGERATOR
KitchenAid
KBBR206EPA00
Refrigerator - REFRIGERATOR
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service