Poulan Snow Blower Hardware

Your Price

$4.99

PartSelect Number PS9022497

Manufacturer Part Number 532409149

Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To replace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.

Your Price

$4.99

Poulan Snow Blower Clamp-Hose

PartSelect Number PS9140678

Manufacturer Part Number 791850

Your Price

$4.99

Poulan Snow Blower Key-Flywheel

★★★★★

1 Review

PartSelect Number PS8925657

Manufacturer Part Number 222698S

Your Price

$3.99

Poulan Snow Blower Bolt, Handle

★★★★★

1 Review

PartSelect Number PS9014802

Manufacturer Part Number 532191574

This Handle Bolt is sourced directly from the original equipment manufacturer for use in various lawn and garden equipment. It is used to secure the upper and lower handles together and is tightened by a knob on the other end. It is made of metal, is black, and is sold individually, not as part of a kit or assembly. This part will need to be replaced when it is worn or damaged and can no longer secure the arms together. No tools are needed to complete this repair. Customers rated this repair as Easy.

Your Price

$3.99

Poulan Snow Blower Screw (Blower Housing)

PartSelect Number PS9064541

Manufacturer Part Number 691108

Your Price

$3.99

Poulan Snow Blower Pin-Float Hinge

PartSelect Number PS9138812

Manufacturer Part Number 797622

Your Price

$3.99

Poulan Snow Blower Clamp-Casing

PartSelect Number PS9064523

Manufacturer Part Number 691024

Your Price

$4.99

Poulan Snow Blower Screw (Connecting Rod)

PartSelect Number PS9064513

Manufacturer Part Number 690976

Your Price

$3.99

Poulan Snow Blower Screw (Choke Valve)

PartSelect Number PS9064361

Manufacturer Part Number 691636

Installation Instructions

FRANK from EASTANOLLEE, GA

Screw can out of the carburator throttle baffel and stuck in the exhaust valve

No compression. Removed the cylinder head. freed the screw, checked the valve to see if it still sealed. Turned the head over with the valves in it, install a spark plug, fill the head dome with gas and see if any leeks out over a 2 hr period. If not you are good to go. Reinstalled every thing with new gaskets and a new carburetor screw. Set the valves to spec. Complete the rebuild and there you have it. Rebuild the carburetor while you have it apart. This motor runs great !!! Read more...