This water filter is found in the rear upper-right corner of the interior of the refrigerator. If your model has a replacement indicator light it will turn red to signal the need for a replacement. If...
This is a door handle fastener to secure the handle to your refrigerator drawer. It is also known and a mounting bolt or screw. It is approximately 1 inch in total length, and is made of metal.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paul
August 23, 2022
Door handles don’t stay on tried screwing in screws too small to hold than stripped it all
For model number CVE28DP2NBS1
Hello Paul, thank you for reaching us. It sounds like you are trying the wrong screws. The correct mounting screw for the handle of your model is part number PS6447735 which is approximately one inch long. Please feel free to contact us if you have any follow-up queries. We look forward to hearing from you if you need assistance with placing an order through our 7-days-a-week customer service. Hope this helps!
Grinding noise seems to be loudest inside freezer drawer. Which fan should I replace first?
For model number CVE28DP2NBS1
Hello Steven, thank you for the query. According to our research, you may need to replace the evaporator fan, part number PS12744144, to fix the issue. We hope this helps!
the fridge is not making ice or putting out water, the solenoid at the bottom -back of the fridge is pulling in and water is going through into the tube - but that is it - THANK YOU
For model number CVE28DP2NBS1
Hi Keith, thank you for reaching out. First, you may need to make sure that the water tube is not clogged or broken and that the water filter is clean. Also, make sure that the water pressure is suitable enough for the ice maker and dispenser to work. If that is not causing the issue, then you may need to check the water inlet valve, part number PS12744135, as it may not be opening properly. If this part is faulty, you may need to replace it. We hope this is helpful!
Hi Dan, thank you for reaching out. We would recommend checking the water inlet valve and water lines for clogging first. If these are fine, the issue is most probably with the ice maker assembly, part number PS16874486. You may need to replace it to fix the issue. We hope this solves your problem!
