Westinghouse Washer Switches

Videos!

Your Price

$128.15

Westinghouse Washer Front Load Door Lock and Switch Assembly

★★★★★

30 Reviews

PartSelect Number PS12364048

Manufacturer Part Number 131763256

This door lock and switch assembly is manufactured to lock the door on your front load washer to prevent it from opening while it is running. You may need to replace the door lock and switch if the door does not open or lock. Your washer will not start if the door does not lock. This part is also known as a washing machine door lock assembly. As per the manufacturer, some models require a new wire harness and a door strike for this door lock assembly to work on the appliance. The original style lock would require the door lock kit.

Fixes these symptoms

Leaking
Lid or door won’t close
Locking Issues
See more...

Installation Instructions

DOUG from KING FERRY, NY

Door on washer wouldn't lock or start

1. Unplug unit.
2. Unscrew 2 nuts holding top in place in rear of unit using phillips head screwdriver.
3.Slide top back and remove.
4. Open door of washer and unscrew 2 screws holding in door lock unit.
5.Pull out unit from the top and install new unit reconnecting the 3 wire connections. Read more...

Your Price

$100.76

Westinghouse Washer Lid Lock Switch

★★★★★

1 Review

PartSelect Number PS2349336

Manufacturer Part Number 134936800

Fixes these symptoms

Will Not Start
See more...

Your Price

$44.90

Westinghouse Washer Temperature Switch

PartSelect Number PS1146951

Manufacturer Part Number 134407700

Your Price

$102.60

Westinghouse Washer Water Level Pressure Switch

PartSelect Number PS1990814

Manufacturer Part Number 134762000

This part is able to sense the water level in the tub. When the water reaches the desired level, this switch stops the water from flowing in the tub and then the washing program begins.

Installation Instructions

Tyran from Montclair, NJ

Washer gave error code 31

I opening that top from the rear and saw the same part order plugged in then new part attached it properly and then was done. Read more...

Your Price

$88.30

Westinghouse Washer Pressure Switch

PartSelect Number PS1524557

Manufacturer Part Number 134680100

This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.

Installation Instructions

Roger from Dassel, MN

Set wash load size; would begin to agitate at proper time; however would continue to fill with water and overflow.

Removed back cover; pulled knob off front (removed small screw). Removed hose connected to pressure switch. Removed old switch. Electrical connections are numbered 1-2-3, and the part positions are also numbered 1-2-3. Pulled off old, installed new. Reconnected hose. Rehooked screw on front, replace knob and back cover. Read more...