Ariens Snow Blower Bearings

Your Price

$13.64

Ariens Snow Blower Lawn Mower Bushing

PartSelect Number PS8797161

Manufacturer Part Number 05503500

Your Price

$5.95

Ariens Snow Blower Bushing

PartSelect Number PS8797133

Manufacturer Part Number 05500111

This OEM-sourced flange bushing supports smooth movement in your lawn equipment by reducing friction. This bearing has an inner diameter of 0.625 inches, an outer diameter of 0.750 inches, a width of 0.5 inches, and a flange diameter of 0.875 inches. Depending on the model and make of your machine, this bushing can be found in various parts of your machine, such as pivot points, axles, and spindles. A damaged bushing causes increased friction, misalignment, and grinding or squeaking noises. Your machine may need expensive repairs and may eventually fail if you do not replace a broken bushing. To remove an existing bushing, you need to remove components that provide access to the flange bearing. Consult your user manual if needed. Locate the bearing and use a screwdriver or wrench to remove any clips, screws, or bolts securing it. Use a bearing puller tool or a mallet to pull or tap the bearing out of your machine if necessary. Please note that the bushing is sold individually.

Your Price

$7.41

Ariens Snow Blower Flange Split Nyliner Bushing

PartSelect Number PS8798089

Manufacturer Part Number 05500030

This flange split bushing is a genuine OEM part used to add stability and reduce friction damage between rotating parts, such as drive shafts and gears, in a variety of outdoor power equipment. The bushing has an outside diameter of 1 1/3 inches and an inner diameter of 1 inch, as well as a flange on one end which prevents the bushing from moving during use. It is made of nylon which is a type of material known for its resistance to wear, and ability to self-lubricate. The bushing is split along its length, for easy removal and installation. The bearing may become damaged if it is inadequately lubricated, or from continuous exposure to heat and chemicals. If you notice that your equipment is excessively noisy, shaking, and difficult to maneuver, you will need to replace the bushing promptly to prevent damage to the equipment. Remove the fasteners that secure the bushing and use a bearing puller to detach the old bushing. Place the new bushing in position and secure it in place.

Your Price

$27.61

Ariens Snow Blower Ball Bearing

PartSelect Number PS8796276

Manufacturer Part Number 05406300

Your Price

$37.67

Ariens Snow Blower Bearing Ball

PartSelect Number PS8797600

Manufacturer Part Number 05409300

This silver metal Ball Bearing is used to reduce the friction between rotating parts and allowing for even weight distribution. This part will require a screwdriver, pliers, socket set, wrench set and nut driver. Its installation is rated as "Easy". An installation tip: ball bearings should be tapped into place. If broken or worn down, you will hear a grinding, growling, screeching, or rumbling sound, and the part should be replaced. Bearings should spin freely with no noise. If the spin is rough, makes a noise, or the balls are discolored, this means they are too worn and should also be replaced. This part requires a bearing puller. Refer to your make, model and diagram to check if this is the right part.