Cooktop Switches
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Cooktop Switches
Your Price
$47.82
In Stock
Cooktop Range Surface Element Control Switch - 6 Inch 1560 W
Pull out the range (the hardest part).
REMOVE THE POWER PLUG FROM THE WALL
Remove 7 screws with nut driver and take off upper back panel.
Remove 2 phillips screws from front, they hold the switch brackets.
The new switches don't fit in the bracket so discard the bracket keeping the screws.
Removing 1 wire at a time from the old switch transfer to the new noting the letter/number ie "H1 P1" combos they are all there just not in the same places on the new switch.
When wiring is complete, using the bracket ,screws from the front screw on the switches.
Replace the back panel with 7 screws.
In my case the old nobs did not fit the shafts of the new switches. I found some at the local hardware store. I bought 4 for $0.29 each! I expect to be replacing the other burner switches shortly. Read more...
PartSelect Number PS236754
Manufacturer Part Number WB24T10029
This surface element control switch, also known as an infinite switch, regulates the power supplied to a 6-inch, 1560-watt heating element on electric ranges. It allows for precise adjustment of heat levels by cycling the element on and off, rather than relying on fixed temperature settings. Operating at 240 volts and drawing between 4.4 to 7.4 amps, the switch ensures consistent and responsive heat control. Replacing a faulty switch can resolve issues such as the element not heating, staying stuck on high, or fluctuating in temperature. This component is essential for maintaining safe and efficient cooking performance.
Fixes these symptoms
- Element will not heat
- Will Not Start
- See more...
Installation Instructions
Marc from Columbia, NJ
The switches failed on both front burners.
Remove nobs from both switches.Pull out the range (the hardest part).
REMOVE THE POWER PLUG FROM THE WALL
Remove 7 screws with nut driver and take off upper back panel.
Remove 2 phillips screws from front, they hold the switch brackets.
The new switches don't fit in the bracket so discard the bracket keeping the screws.
Removing 1 wire at a time from the old switch transfer to the new noting the letter/number ie "H1 P1" combos they are all there just not in the same places on the new switch.
When wiring is complete, using the bracket ,screws from the front screw on the switches.
Replace the back panel with 7 screws.
In my case the old nobs did not fit the shafts of the new switches. I found some at the local hardware store. I bought 4 for $0.29 each! I expect to be replacing the other burner switches shortly. Read more...
Your Price
$67.08
In Stock
Cooktop Infinite Switch
PartSelect Number PS12114485
Manufacturer Part Number W11129442
This surface burner switch is a genuine replacement component designed to regulate the heat output of the left front burner on select electric ranges. It functions by cycling electrical power to the burner, maintaining the desired temperature throughout cooking. A faulty switch may result in overheating, lack of heat, or the burner remaining at a single temperature setting. Replacing this part restores precise temperature control and ensures safe, consistent operation. Installation should be performed with the appliance disconnected from power, and may require basic tools and reference to model-specific instructions.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Shannon from Orlando, FL
Front 3 setting burner was not heating properly; switched to high without adjustment
Looked up the part in the online manual, watched a YouTube video, removed upper back of range, swapped out part. Saved $200!!
Read more...
Your Price
$42.83
In Stock
Cooktop Burner Switch Kit
Use a nut driver or Phillips screwdriver. Remove rear panel.
Pull out control knob. If it is stuck, wrap a small rag around the back of it and pull the rag steadily.
Carefully match marked terminals on the replacement switch with those on original. Switch terminals may not be in the same location. Replace wires one for one, one at a time.
Carefully select the correct knob filler for the switch post. Several are supplied. Proceed with logic and measure the shaft length and the filler length and type to match. Read more...
PartSelect Number PS470145
Manufacturer Part Number 5303935086
This is a burner switch kit, also known as the surface element control switch repair kit, for ranges. This burner switch kit sends voltage to the surface element coil and it controls the stove top surface burner. If the following symptoms occur, installing the switch could be the solution to the problem: surface element not heating, overheating, or inconsistent heating. Usually, if the element is not defective, that is a sign there is an issue with the switch. The kit comes with several insert sizes, and includes screws as well. The tools needed for this project are a nut driver, pliers, and screwdrivers.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
George from New Port Richey, FL
High heat reluctant to turn down.
Most of the job is simple fastener mechanics.Use a nut driver or Phillips screwdriver. Remove rear panel.
Pull out control knob. If it is stuck, wrap a small rag around the back of it and pull the rag steadily.
Carefully match marked terminals on the replacement switch with those on original. Switch terminals may not be in the same location. Replace wires one for one, one at a time.
Carefully select the correct knob filler for the switch post. Several are supplied. Proceed with logic and measure the shaft length and the filler length and type to match. Read more...
Your Price
$149.33
In Stock
Cooktop Burner Switch - Right Front
PartSelect Number PS11731368
Manufacturer Part Number W10857622
This dual surface element control switch is a genuine OEM replacement part designed to fit select models of stoves, ovens, and ranges. The control switch is an essential component that allows you to turn the surface element on and off, as well as regulate the amount of heat the element produces. If your stove’s surface element isn’t heating properly, fluctuates in temperature, or won’t turn off, replacing the control switch can restore full functionality. Before installation, ensure the range is unplugged, or disconnect the power at the house circuit breaker to avoid electrical hazards. The surface element control switch is usually located behind the stove’s front control panel. To install, remove the panel and disconnect the old switch from the wiring harness. Install the new switch by securing it in place and reconnecting the wiring to match the original configuration. After installation, turn the power back on and test the surface element to verify it operates correctly.
Fixes these symptoms
- Element will not heat
- See more...
Your Price
$34.85
In Stock
Cooktop Range Infinite Burner Switch - 8 Inch
PartSelect Number PS11744487
Manufacturer Part Number WP7403P239-60
This infinite switch is for 8-inch range burners. When an element is unable to produce any heat on a modern oven, the problem may lie with the infinite switch. This switch is responsible for sending power to the surface elements. Check the element and terminal block to ensure they are working properly. If they are in working order, check the infinite switch at the control panel for any wires that have overheated, or broken terminals to or from the infinite switch. If the infinite switch is damaged or malfunctioning, it will need to be replaced. Remember to unplug your range before beginning this repair.
Fixes these symptoms
- Element will not heat
- Oven is too hot
- Will Not Start
- See more...
Installation Instructions
Dennis from Hagerstown, MD
The Burner was getting too hot and you could not regular the tempature
Moved the Appliance out unplugged it and removed the backing plate then Remove the Knob and unscrew the infinite switch then marking the 5 wires to know where the go on the new switch, removing and replaced it with the new one
Read more...
Your Price
$70.45
In Stock
Cooktop Surface Burner Switch - 240v
2. Took off the cover for the center vent and loosened the two screw holding the housing in place--the screws didn't have to come out completely as it is a U-shaped friction hold.
3. Unscrewed the two screws holding the old control switch in place--lifted the housing enough to get at the old switch and carefully pulled it loose--it was a front burner so the control switch was about as far back as it could be but still wasn't that hard to get at.
4. Turned the new switch to orient the wire connectors, then, using a needle-nose pliers, removed each friction connector, one at a time, and fitted them on the new switch (note: one of the wires fitted best if it went under as opposed to around the base of the new switch).
5. Replaced the control back through the housing and screwed it in place, making sure the orientation of the control matched the way it looked originally.
6. Slide the housing back over the two screws and tightened, replace vent.
7. Replaced the knob and turned on the power.
(The above took me about twice as long to write as it did to make the repair and I write professionally but am not a professional electrician.)
Also, I bought a second control switch because, given the age of the unit, I'm sure another one will go. The second one will assure that it won't happen :-). Read more...
PartSelect Number PS12347301
Manufacturer Part Number W11120791
This surface burner switch, also known as an infinite switch, controls and regulates the heat output of the burners on a stovetop. The user simply adjusts the knob on the user interface panel, which in turn controls this switch. Made for various ranges, wall ovens and cooktops, this is a genuine OEM part that comes by itself, without any hardware like screws or nuts. This burner switch is an electrical component that you also handle directly, so it can become faulty leading to problems like your stovetop not heating enough, overheating or staying at a fixed heat. This burner switch is a vital component for your stovetop and if it presents any of those issues, it needs to be replaced immediately. A screwdriver, set of pliers and wiring diagram will be needed for the replacement and installation process, and you will need to remove your appliance from the wall outlet first. Remove the knobs from the control panel and then gain access to the underneath portion of it with your screwdriver and disconnect the switch. Remove the wires from the burner switch with a set of pliers and disconnect the securing screws holding the switch in place. Now, you can install the new switch and reassemble the panel, being mindful of wiring each connector to the appropriate wire.
Fixes these symptoms
- Element will not heat
- Oven is too hot
- Will Not Start
- See more...
Installation Instructions
James H from Oxford, NY
Burner had one temperature--hot, regardless of setting
1. Killed power and removed the regulator's knob, noted the position of the old control.2. Took off the cover for the center vent and loosened the two screw holding the housing in place--the screws didn't have to come out completely as it is a U-shaped friction hold.
3. Unscrewed the two screws holding the old control switch in place--lifted the housing enough to get at the old switch and carefully pulled it loose--it was a front burner so the control switch was about as far back as it could be but still wasn't that hard to get at.
4. Turned the new switch to orient the wire connectors, then, using a needle-nose pliers, removed each friction connector, one at a time, and fitted them on the new switch (note: one of the wires fitted best if it went under as opposed to around the base of the new switch).
5. Replaced the control back through the housing and screwed it in place, making sure the orientation of the control matched the way it looked originally.
6. Slide the housing back over the two screws and tightened, replace vent.
7. Replaced the knob and turned on the power.
(The above took me about twice as long to write as it did to make the repair and I write professionally but am not a professional electrician.)
Also, I bought a second control switch because, given the age of the unit, I'm sure another one will go. The second one will assure that it won't happen :-). Read more...
Your Price
$66.09
In Stock
Cooktop Switch
PartSelect Number PS16227346
Manufacturer Part Number 5304526190
This is an OEM surface burner switch, which works with cooktops.
Your Price
$66.28
In Stock
Cooktop Infinite Switch
PartSelect Number PS12347302
Manufacturer Part Number W11120795
The surface element control switch is an essential component in electric ranges, responsible for regulating the heat output of the surface burner. It allows you to adjust the temperature levels by controlling the electrical flow to the burner. If your stovetop burner fails to turn on, stays on high heat, or doesn’t respond to adjustments, a faulty switch could be the cause. This switch features a double flat shaft design and is nut-mounted for secure installation. Always disconnect the power supply before replacing the switch to prevent electrical hazards. Ensure compatibility with your appliance model before purchasing.
Fixes these symptoms
- Element will not heat
- Will Not Start
- See more...
Installation Instructions
Malcolm from White House, TN
Burner Switch Broke were Knob attached
First I cut off power supply, removed screws that held panel on, pulled the switch up and disconnected wires. Installed new switch, being sure to connect wires in the correct places. Refastened panel to stove top. Turned power back on and tested switch and it Worked.
Read more...
Your Price
$50.30
In Stock
Cooktop Range Infinite Heat Switch Kit
2. Lift range lid.
3. Remove back panel. Loosen the 6 - 1/4" nuts, then lift up slightly, which compresses the "latch" at the top middle. Let down and panel comes off easily.
(Note: Do not remove wires yet)
4. Remove control knob from front panel by pulling gently, exposing 2 small tap screws
5. unscrew the 2 small tap screws, freeing the switch.
6. NOTE THE EXISTING WIRING! Each terminal has a letter. Take a photo or drawing for reference, because the new switch's post locations were not the same as the old.
7. In my case I had to replace the terminal block kit with a new one. (don't try the aftermarket one's at Home Depot...bad idea event though they say Hotpoint) so I ran those wires first. Easy removal of old, only one wire clip, then fish the wires through. Secure with tap screw at burner location.
8. Hook up the wires. The ones coming from the burner don't seem to matter which one goes to which post but make sure you're replacing them on the posts that the original were on. What I did was just unhook the old posts one at a time and find the corresponding letter on the new one.
9. Break off stem at length of old switch with pliers. make sure you find where off and on are on the switch. Orient the off at the top, then push through from back of range.
10. Screw the 2 tap screws in, securing the switch.
11. Place the orange retainer oriented with flat side the same as the knob, and push the knob back in place.
12. Close lid, replace back panel
13. Insert drip pan/burner into terminal block and secure in drip pan. If your burner plugs are corroded or exposed, replace the burner as it will short out.
14. Plug in to socket and test before pushing range back into place. Read more...
PartSelect Number PS16216966
Manufacturer Part Number WB21X36771
The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.
Fixes these symptoms
- Element will not heat
- Will Not Start
- See more...
Installation Instructions
Scott from Olathe, KS
Front burner would not heat up
1. Pull out range and unplug from socket.2. Lift range lid.
3. Remove back panel. Loosen the 6 - 1/4" nuts, then lift up slightly, which compresses the "latch" at the top middle. Let down and panel comes off easily.
(Note: Do not remove wires yet)
4. Remove control knob from front panel by pulling gently, exposing 2 small tap screws
5. unscrew the 2 small tap screws, freeing the switch.
6. NOTE THE EXISTING WIRING! Each terminal has a letter. Take a photo or drawing for reference, because the new switch's post locations were not the same as the old.
7. In my case I had to replace the terminal block kit with a new one. (don't try the aftermarket one's at Home Depot...bad idea event though they say Hotpoint) so I ran those wires first. Easy removal of old, only one wire clip, then fish the wires through. Secure with tap screw at burner location.
8. Hook up the wires. The ones coming from the burner don't seem to matter which one goes to which post but make sure you're replacing them on the posts that the original were on. What I did was just unhook the old posts one at a time and find the corresponding letter on the new one.
9. Break off stem at length of old switch with pliers. make sure you find where off and on are on the switch. Orient the off at the top, then push through from back of range.
10. Screw the 2 tap screws in, securing the switch.
11. Place the orange retainer oriented with flat side the same as the knob, and push the knob back in place.
12. Close lid, replace back panel
13. Insert drip pan/burner into terminal block and secure in drip pan. If your burner plugs are corroded or exposed, replace the burner as it will short out.
14. Plug in to socket and test before pushing range back into place. Read more...
Your Price
$70.45
In Stock
Cooktop Right Front Burner Switch
PartSelect Number PS12347916
Manufacturer Part Number W11162115
Introducing Whirlpool's Right Front Burner Switch, an authentic OEM sourced item designed to deliver improved functionality to your stoves, ovens, or ranges. Acting as a surface element control, this switch is essential for regulating the heat produced by your appliance, ensuring your cooking experience remains efficient and consistent. The installation process is straightforward, however, do disconnect the range or shut off the household circuit to ensure safety while fitting. We recommend the use of work gloves as a precautionary measure during the installation. Although parts may appear identical at glance, minor variations in size and shape might be evident, hence please verify the compatibility with your model prior to purchase. Flaunting a robust construction and superior efficiency, this Whirlpool burner switch is set to revamp the way you utilize your appliance.
Fixes these symptoms
- Element will not heat
- See more...