General Electric Washer Agitators

Your Price

$78.69

General Electric Washer Agitator

★★★★★

34 Reviews

PartSelect Number PS16542670

Manufacturer Part Number WH43X30957

This is an agitator assembly for washing machines. Agitators are used within top load washing machines to move back and forth and effectively wash your clothes. However, if the agitator currently in your washing machine is damaged and/or worn out, it needs to be replaced for your washing machine to operate properly. Replacing this agitator assembly will require a wrench, and for you to turn off the power and water supply for your washing machine. This agitator assembly is an OEM part that is sold individually and does not come with any other parts or accessories.

Fixes these symptoms

Marks left on clothes
Spinning Issues
Will not agitate
See more...

Installation Instructions

MICHAEL from LK PEEKSKILL, NY

Agitator wore out over time and needed to be replaced

Replacing was easier than opening the box it came in. Used a 7/16 socket and a few extensions to reach the bottom of the agitator. It came out super quick cleaned out the fabric softener older than my kids from under it. Lined up the groves of the new one and it slid easily. I took a small piece of painters tape and crumbled it into a small ball and put it in the socket to keep the bolt in place while it lowered it into the agitator. Made it snug and we were back in business good as new!!! Read more...

Your Price

$50.30

General Electric Washer Agitator Base Hybrid Assembly

★★★★★

10 Reviews

PartSelect Number PS16743416

Manufacturer Part Number WH43X34257

The agitator rotates back and forth to move the clothes inside the tub to clean the load.

Fixes these symptoms

Spinning Issues
Will not agitate
See more...

Installation Instructions

Robert from POTTSTOWN, PA

Auger would spin in both directions but not spin while washing

Used a Phillips screw driver to lock the top and bottom of auger. Took a while to separate from base. Used another driver to remove old base and put the new one on with nut driver. Placed auger on base and turned to lock. Job done and works great.
Thanks Read more...

Videos!

Your Price

$53.55

General Electric Washer Dual Action Agitator

★★★★★

120 Reviews

PartSelect Number PS1482519

Manufacturer Part Number WH43X10034

This is a dual-action agitator for a washer. It is an OEM replacement part that is sourced from the manufacturer. The agitator tosses your clothes to clean them efficiently. This plastic dual-action agitator is white in color. It is approximately 18 inches tall with a base diameter of about 12 1/4 inches. No tools are required for this repair. Your agitator has eight tabs that fasten on the drive block of your washer, which is driven by the transmission. This part does not include the agitator coupling kit, which is frequently purchased at the same time as the agitator.

Fixes these symptoms

Marks left on clothes
Spinning Issues
Will not agitate
See more...

Installation Instructions

Paul from Carneys Point, NJ

One of eight clips broke off of the agitator assy allowing the assembly to come lose on heavy loads.

I replaced the coupling by only having to remove one bolt with a socket wrench. Once replaced I installed the new assy over the coupling making sure ro align the splines then pushing down until the assy snapped into place. Easy. Read more...

Videos!

Your Price

$41.83

General Electric Washer Agitator Coupling Kit

★★★★★

53 Reviews

PartSelect Number PS1517844

Manufacturer Part Number WH49X10042

The agitator coupler connects the agitator to the agitator shaft. Common symptoms of a damaged coupler include: a grinding sound during the wash cycle, the washer refusing to agitate or spin, or the washing machine shakes and moves during the wash cycle. Unplug the washer and pull the agitator straight up. Remove the bolt that holds the coupler onto the shaft of the transmission and pull the coupler off. Be sure to clean any dirt, rust, or residue off the transmission spline grooves, and make sure the grooves on the agitator splines are clean and undamaged. We recommend using the gasket and bolt that come with the replacement coupling.

Fixes these symptoms

Leaking
Spins slowly
Will not agitate
See more...

Installation Instructions

Paul from Carneys Point, NJ

One of eight clips broke off of the agitator assy allowing the assembly to come lose on heavy loads.

I replaced the coupling by only having to remove one bolt with a socket wrench. Once replaced I installed the new assy over the coupling making sure ro align the splines then pushing down until the assy snapped into place. Easy. Read more...

Videos!

Your Price

$26.87

General Electric Washer Agitator Coupling

★★★★★

22 Reviews

PartSelect Number PS1482517

Manufacturer Part Number WH43X10032

Bolt not included. This part connects the transmission drive shaft to the agitator base.

Fixes these symptoms

Will not agitate
See more...

Installation Instructions

Jared from georgetown, KY

Agitator will not spin

Agitator would not spin and it was going to cost me I've a hundred soars for someone to come and fix it. I looked on this sight and found out what I thought was the problem and ordered four parts to fix it. I was amazed because they came in two days later. I started withe coupling which was the cheapest part and instaled it and it fixed it to return the other parts I called the 800 number and they emailed me a return authorization and I sent it back so it cost me 15 dollars and five minutes to fix it. Read more...

Your Price

$13.91

General Electric Washer Agitator Cap - Short

★★★★★

1 Review

PartSelect Number PS12073992

Manufacturer Part Number WH43X25443

Sold individually.

Fixes these symptoms

Will not agitate
See more...

Installation Instructions

jack from SANTA ANA, CA

Lower agitator, very loose and wobbly

Reached down into the washer bowl. Fingers on each side of the agitator base. Quick jolt up agitator popped out adjustable wrench took the bolt. Off of the agitator coupling removed coupling wire, brushed the gear slots installed a new coupling with both new bolt lined up, agitator slots pump, the new agitator on after lined up with a down force quick jolt, then installed the new fabric softener, part on top of agitator Read more...

Your Price

$49.81

General Electric Washer Agitator Cap

PartSelect Number PS446528

Manufacturer Part Number 3204395

Fixes these symptoms

Will not agitate
See more...

Your Price

$19.89

General Electric Washer Ens. Tornillo Agitador

PartSelect Number PS3501417

Manufacturer Part Number WH01X10619

Your Price

$167.43

General Electric Washer Agitator Filter

PartSelect Number PS273334

Manufacturer Part Number WH45X144

Installation Instructions

Kathryn from Signal Mountain, TN

Agitator was shredded

The agitator broke free while the washer was spinning and it shredded the plastic. All I had to do was remove a little top cap off the agitator by prying it up with a screwdriver, then replacing the cap on the new agitator. Viola! Done. Very easy! Read more...