Jenn-Air Trash Compactor Parts

Popular Jenn-Air Trash Compactor Parts

Your Price
$58.57
   In Stock
Jenn-Air Trash Compactor Drive Gear Kit
★★★★★
★★★★★
48 Reviews
PartSelect Number PS398589
Manufacturer Part Number 882699
This is the drive gear kit for the ram that compacts the trash inside your compactor. If your compactor ram is getting stuck, there is excess noise during its cycle, or if your compactor does not stop at the end of its cycle, the driving gear may be the issue. The gear is white, plastic and approximately 4.5 inches in diameter. This drive gear kit includes both gears, pin spring, retaining clip (c-ring), ram stop, ram cam, and instructions. Make sure to disconnect the power to your trash compactor before beginning the repair.
Fixes these symptoms
  • Compactor ram gets stuck
  • Doesn’t stop at end of compacting cycle
  • Drawer is hard to open and or close
  • See more...
Installation Instructions
Asbjorn from The Woodlands, TX
Compactor stuck in lower position
Moved the compactor out from under cabinet and unplugged the powercable.Laid compactor over on its side Removed the top (4 screws) and base plate (3 screws) as well as the coverplate for the motor(3 screws)Found that large drive was broken in half. Used two screwdrivers to start split ring then pliers to pull it off the rest of the way.
Removed the drive gear and the washer.
Used a nail to drive out the pin for the smaller drive gear kit. Removed and replaced with new, used new pin to lock it on to the shaft. Changed out the bearings and washers on one powerscrew, put chain back on. Then was then a simple matter to put the new gear back on the chain then slide the whole thing back on the drive shaft. Replace the washer then slip the split ring back in place and seat it home with the pliers. Greased chain, gear drive and powerscrew. Put all covers back on with the screws. Pushed button it worked.
Read more...
Your Price
$67.86
   In Stock
Jenn-Air Trash Compactor 15 Inch White Plastic Compactor Bags - 60 Pack
★★★★★
★★★★★
2 Reviews
PartSelect Number PS1964577
Manufacturer Part Number W10165294RB
This is a 60-pack of plastic compactor bags. These bags are 15 inches wide, 3 millimeters thick and are white in color. The 3-millimeter thickness makes the bags more durable and helps prevent tearing. They are an environmentally-conscious product that are made of 50% post-consumer recycled material. The bags feature a Slip-N-Grip design that prevents the bag from slipping down into the compactor. Strong resin that is incorporated into the material increases puncture and tear resistance to help keep your trash in the bag. These bags will fit 15-inch rectangular compactors.
Your Price
$64.08
   In Stock
Jenn-Air Trash Compactor Directional Switch
★★★★★
★★★★★
15 Reviews
PartSelect Number PS11744742
Manufacturer Part Number WP777811
The function of the directional switch on your trash compactor is to ensure the ram lowers to compress your trash, then returns to the top position. If your trash compactor does not complete this task, will not stop at the end of the compacting cycle, or is noisy during operation, you may need to replace the directional switch. Be sure to disconnect your trash compactor from the power source before completing this repair. This is a fairly easy repair. After you open the control panel of the compactor, all you will need to do is unplug the old switch from the electrical wires, and plug the new switch in.
Fixes these symptoms
  • Compactor ram gets stuck
  • Doesn’t stop at end of compacting cycle
  • Noisy
  • See more...
Installation Instructions
Scott from Indianapolis, IN
Trash Compactor ram wouldn't lower
I pulled the trash compactor out from under the counter.

I took out the four screws that kept the top cover in place to expose the ram.

The gear shafts were turning but the ram would not lower, at first I though the ram drive bolts were stripped and it wouldn't engage the shaft. Then I realized there was a mechanical directional\limit switch at the top that controlled the power and direction the gear shafts were turning, this switch was broken.

Just had to take off the front plate that was held on by a number of screws and replace the switch that was held on by two more screws. It had five wires attached to it, the new switch was clearly labeled as to which color wire went where.
Read more...
Your Price
$26.42
   In Stock
Jenn-Air Trash Compactor 15 Inch Compactor Bags - 15 Pack
★★★★★
★★★★★
3 Reviews
PartSelect Number PS1964579
Manufacturer Part Number W10165295RP
Trash compactor bags are a practical way to discard your waste. Due to the extreme pressure of the compactor, trash compactor bags designed to handle the force are necessary. These bags are made from tough 2.5-millimeter, multi-laminate plastic, and the patented Slip-Grip design prevents the bag from slipping into the compactor bin. They measure approximately 15 inches wide x 15 inches high and are made from 50 percent post-consumer recycled plastic. This pack of 15 trash compactor bags is a genuine OEM replacement part, and will fit most rectangular 15-inch trash compactors.
Installation Instructions
Sherry from SALEM, NY
Paper & Plastic 15” Compactor Bags not available
I have always used compactor bags made of paper & plastic. I was sent bags made of only plastic. I called and was told that is the only kind available. I am concerned that the plastic bags may not be strong enough.

I quest I will have to try these all plastic bags. I hope they are strong enough and work properly.
Read more...
Your Price
$7.44
   In Stock
Jenn-Air Trash Compactor Foot, Front - Single
★★★★★
★★★★★
4 Reviews
PartSelect Number PS11747965
Manufacturer Part Number WPW10001130
The front facing foot is sold individually. It is used on your washing machine and can also be known as an adjustable leveling leg. This specific front facing leveling leg has a rubber foot. It is important that when installing this part you are very careful, if not installed correctly your washer will be off balance which will then cause it to vibrate and/or shake during the cycle. The function of the adjustable foot is to keep your washing machine supported and to make sure that it is level at all times. The tools you will need for this repair include a pair of channel lock pliers, and a 9/16 wrench.
Installation Instructions
Paddy from Ferndale, WA
Bearings went out in the drum.
purchased the bearings at Napa auto parts for 16$. Over all it was a little difficult to get the bearings out and back in. Used a brass drift to drive them out and to seat them back in.. Read more...
Your Price
$16.38
   In Stock
Jenn-Air Trash Compactor Drawer Roller
★★★★★
★★★★★
6 Reviews
PartSelect Number PS11747573
Manufacturer Part Number WP9871602
This bearing roller may also be known as the wheel assembly or the container roller bearing, and it is a piece for your trash bin. The function of this bearing is to work in conjunction with your trash bin to allow the canister to roll free. For this repair you will need a nut driver, a pair of pliers, a screwdriver set, and an adjustable wrench. The most obvious symptom that will require you to replace this part is if your drawer is hard to open and/or close. Your appliance comes with two bearing rollers and it is sold individually.
Fixes these symptoms
Installation Instructions
Michael from Morgan Hill, CA
Install NewDrive Gear Kit,( I also added,2 poor nuts and all 4 wheels)
My compactor is quite heavy, I moved it onto the kitchen floor unplugged and removed the cover plate from the bottom exposing the drive gears. The small (pinion ) gear was stripped as well as a section of the drive gear. I followed the video and removed the (fulthy) ram. The interior filth was so great I removed all parts to my garage and spent a lot of time cleaning them especially the ram.By the time my parts arrived, it was all clean and ready to go. I had also found that one of the power nuts was broken and had ordered new wheels and power nuts. Assembly was straight forward and it works like new now, Read more...
Your Price
$19.58
   In Stock
Jenn-Air Trash Compactor Charcoal Filter
★★★★★
★★★★★
3 Reviews
PartSelect Number PS11742279
Manufacturer Part Number WP4151750
This part is sold individually. The filter is black in color and measures approximately 4-1/2 inches wide by 4-1/2 inches high. This part is for your trash compactor. This part acts as a filter and deodorizer. This can become worn down and develop a smell over time. To access the filter, you will need to depress the food pedal on the trash compactor and pull the door forward. The plate covering the filter should just lift off without the use of any tools. You will find the filter underneath where it is aligning the fan housing.
Installation Instructions
DONNA from SHERMAN, TX
Control knob broke
The repair was easy, just wish I hadn't waited so long to decide to fix it! Read more...
Your Price
$35.88
   In Stock
Jenn-Air Trash Compactor 15" Compactor Bag Carrier with Easy Grip Handles
★★★★★
★★★★★
10 Reviews
PartSelect Number PS1782408
Manufacturer Part Number 13030RP
This 15 inch compactor bag carrier fits around the compactor bag inside the compactor and is used to easily lift and remove trash compactor bags once they are full. Simply place the reusable bag carrier in the garbage can before placing a new compactor bag in the bin. The easy-grip handles make removal easier once the bag is full. This piece also makes a good carrier for bringing in logs for your fireplace. This part fits most 15 inch compactors. For the full list of compatible compactors, check the list below. Compactor bags are sold separately.
Fixes these symptoms
Installation Instructions
Edward from Deerfield Beach, FL
Change out defective switch
Pulled out compactor drawer and removed same, slid the compactor cabinet out and unpluged the appliance. Removed the two phillips head screws to release the control panel. lossened the locking nut from switch. matched the switches to be sure parts were the same,switched the wires to the new switch and reinstalled.replaced phillips screws, all Done !!! Read more...
Your Price
$58.74
   In Stock
Jenn-Air Trash Compactor PEDAL-FOOT,DEEP,BLK
★★★★★
★★★★★
1 Review
PartSelect Number PS16763328
Manufacturer Part Number W11636605
Fixes these symptoms
  • Drawer is hard to open and or close
  • Won’t stay on
  • See more...
Your Price
$56.16
   In Stock
Jenn-Air Trash Compactor Power Nut
★★★★★
★★★★★
4 Reviews
PartSelect Number PS11744741
Manufacturer Part Number WP777533
This part is a power nut, and it is intended to be used in conjunction with trash compactors. The function of this nut is to fasten to the side of the ram where it is threaded. When the power screw rotates, it is fed through the power nut, which pulls the ram down to compress the trash. This part is just over an inch in diameter, and is just one inch thick. This part is white and made entirely of plastic. The reason for needing to replace this part is if your compactor ram gets stuck, or if it does not stop at the end of the compacting cycle.
Fixes these symptoms
  • Compactor ram gets stuck
  • Doesn’t stop at end of compacting cycle
  • See more...
Installation Instructions
Michael from Morgan Hill, CA
Install NewDrive Gear Kit,( I also added,2 poor nuts and all 4 wheels)
My compactor is quite heavy, I moved it onto the kitchen floor unplugged and removed the cover plate from the bottom exposing the drive gears. The small (pinion ) gear was stripped as well as a section of the drive gear. I followed the video and removed the (fulthy) ram. The interior filth was so great I removed all parts to my garage and spent a lot of time cleaning them especially the ram.By the time my parts arrived, it was all clean and ready to go. I had also found that one of the power nuts was broken and had ordered new wheels and power nuts. Assembly was straight forward and it works like new now, Read more...

Jenn-Air Trash Compactor Appliance Types

Related Jenn-Air Trash Compactor Parts

Popular Jenn-Air Trash Compactor Models

Below are the most popular Jenn-Air Trash Compactor models we have. Enter your model number in the search box to find your model.