Kawasaki Small Engine Parts

Your Price

$20.35

Kawasaki Small Engine Oil Filter

PartSelect Number PS17016818

Manufacturer Part Number 49065-0724BK

Oil Filter

Gasket-Rocker Case – Part Number: 11060-7001

Your Price

$7.19

Kawasaki Small Engine Gasket-Rocker Case

PartSelect Number PS8843310

Manufacturer Part Number 11060-7001

This Gasket-Rocker Case is a grey, individually sold part, direct from the original equipment manufacturer. It requires only a socket to install and is rated as Easy to install by customers. This part is installed between the valve cover and cylinder head, by torquing in an alternating pattern to the manufacturer specifications for a proper seal. It provides a tight seal between the cylinder head and valve cover, and if broken due to general wear, you will see oil leaking around it. This part should be replaced if broken, or if removing the valve cover for other repairs as the gasket can only be used once. Only a visual inspection is needed to check for leaks. Refer to your owners manual or model number to ensure you are selecting the right part.

Plug-Spark,Bpr4Es(Ngk),Solid – Part Number: BPR4ES

Your Price

$5.23

Kawasaki Small Engine Plug-Spark,Bpr4Es(Ngk),Solid

PartSelect Number PS9314547

Manufacturer Part Number BPR4ES

This NGK BPR4ES spark plug is sourced from the original manufacturer for use in a variety of small engines. It is responsible for igniting the fuel-air mixture in the engine cylinder, needed for the engine to operate. The spark plug is a small, cylindrical part consisting of a metal body, a ceramic/porcelain insulator, one center electrode, and one ground electrode. The spark plug can fail if the insulator breaks, the electrodes wear down, or if it becomes fouled. If the spark plug has failed, you will experience difficulties starting your equipment, decreased power output, and engine misfiring. To check if the spark plug is faulty, you can use a spark tester or a multimeter set to continuity. To replace the spark plug, first disconnect the spark plug wire, and then use a spark plug socket wrench to loosen and remove the old spark plug. Take the new spark plug and set the gap to the correct size. Thread it into the cylinder head using your hands to avoid cross-threading. Once it is in place you can finish tightening it with the spark plug socket wrench. Reconnect the wire, and the equipment should be ready to run smoothly again.

Cap-Assembly-Tank – Part Number: 51048-2078

Your Price

$7.95

Kawasaki Small Engine Cap-Assembly-Tank

★★★★★

2 Reviews

PartSelect Number PS8998548

Manufacturer Part Number 51048-2078

The Fuel Cap Assembly, is a black, plastic cap that keeps fuel inside the tank, and debris out. If broken, fuel will begin leaking out and it must be replaced. Installation is rated as "Easy", the part simply attaches on top of the fuel tank. Refer to your make, model, and diagram to ensure this is the correct part.

Element-Air Filter – Part Number: 11013-0752

Your Price

$19.54

Kawasaki Small Engine Element-Air Filter

PartSelect Number PS11835481

Manufacturer Part Number 11013-0752

Your Price

$40.87

Kawasaki Small Engine Fuel Pump

PartSelect Number PS17016280

Manufacturer Part Number 49040-0801

Fuel Pump

Your Price

$10.38

Kawasaki Small Engine Filter-Fuel

PartSelect Number PS11835770

Manufacturer Part Number 49019-0027

This OEM Fuel Filter is a white, individually sold, plastic part, which measures 3 x 1.25 inches. It can be installed using pliers and is rated as Easy to install by customers (Tip: Make sure the fuel clip is secure when installing). This part is attached along the fuel line, between the fuel tank and carburator, and is used to filter contaminents out of the fuel. If broken fuel will leak, and it will smell. If clogged, there will be no fuel flowing out of it. If broken or clogged, it should be replaced. It should also be replaced during regular maintenance. Check your owners manual or model number to ensure you are selecting the right part.

Your Price

$5.22

Kawasaki Small Engine Rod-Push

PartSelect Number PS8860046

Manufacturer Part Number 13116-2057

This OEM Push Rod is a silver, metal part, approximately 5.5 inches long. It can be installed using a wrench or sockets. A Spark Plug Gap Tool may also be needed for maintenance. The installation of this partis rated as Medium difficulty by customers. It attaches inside the cylinder head, and is installed by tightening the rocker nut on top to manufacturer specs. This part opens and closes the intake and exhaust valves, and if broken there will be poor engine performance as well as an internal knocking or tapping sound from the engine. If damaged, likely due to fatigue or stress, it must be replaced. Refer to your owners manual or model number to ensure you are slecting the correct part.

Gasket-Muffler – Part Number: 11060-7021

Your Price

$4.99

Kawasaki Small Engine Gasket-Muffler

PartSelect Number PS8843313

Manufacturer Part Number 11060-7021

Seal-Oil-So 8X14X5 Hs – Part Number: 92049-7019

Your Price

$4.99

Kawasaki Small Engine Seal-Oil-So 8X14X5 Hs

★★★★★

1 Review

PartSelect Number PS9157914

Manufacturer Part Number 92049-7019

This genuine oil seal is a brown, rubber part, measuring 8 x 14 x 5mm. This part can be installed using a screwdriver, wrench set, pliers, and pick, and a seal puller may also be required for maintenance. This repair is rated as "Easy" to install by customers. It attaches to the governer shaft to provide a tight seal, and if broken due to general wear or drying out, there will be visible oil coming out around the shaft. If damaged or missing, it should be replaced. Check your owners manual for the correct part number.

Top Appliance Brands

Top Lawn Equipment Brands

Top Appliances

Top Lawn Equipment

Popular Kawasaki Small Engine Parts

Kawasaki Small Engine Appliance Types

Popular Kawasaki Small Engine Models

Troubleshooting at your fingertips

Kawasaki Small Engine Parts

Find Your Part

Popular Kawasaki Small Engine Parts

Kawasaki Small Engine Appliance Types

Popular Kawasaki Small Engine Models

Troubleshooting at your fingertips