LG Dishwasher Parts

Find Your Part

Model number locator Need help finding your model number?
  • Search your model number to find:
  • Genuine OEM parts guaranteed to fit
  • Free manuals and guides
  • Repair instructions and videos
LG Appliance Parts
Shop By Appliance Type Shop By Part Type

Popular LG Dishwasher Parts

HOLDER – Part Number: MEG64438801
Your Price
$8.81
   In Stock
LG Dishwasher HOLDER
★★★★★
★★★★★
4 Reviews
PartSelect Number PS12081829
Manufacturer Part Number MEG64438801
This holder, also known as a mounting bracket, is responsible for securing the dish rack in place inside your dishwasher during cleaning. It is a genuine OEM replacement part sourced directly from LG to ensure a perfect fit for your dishwasher. It is gray in color and measures 1 inch by 1 inch. If the holder is lost or broken, your dish racks may become dislodged or unstable and cause damage inside the dishwasher. Each holder is sold individually.
Installation Instructions
Gregory from YONKERS, NY
to change the clip that holds the the upper rack the whole rail must be changed
you need to carefully apply a little pressure to the rail moving it back towards the back of the tub, this will let it unhook from the tub, then just slide the new rail into place. Read more...
Hinge Cable – Part Number: 4933DD3001B
Your Price
$17.93
   In Stock
LG Dishwasher Hinge Cable
★★★★★
★★★★★
27 Reviews
PartSelect Number PS3524406
Manufacturer Part Number 4933DD3001B
This dishwasher door hinge cable assembly connects the door to the spring. The door hinge cable and the door spring apply tension to the door to prevent it from dropping open too quickly. This part contains two plastic pieces which are approximately 2 inches in length by 3/4-inch in width, as well as a rope portion that measures approximately 8 inches in length. When beginning this repair, be sure to use caution when replacing the door hinge cable. The spring to which the door hinge cable attaches is under tension and could snap. This part is sold individually.
Fixes these symptoms
Installation Instructions
Charles from DENNIS, MA
Dishwasher door became heavy and would fall to the floor if you didn't hold it up.
Removed mounting screws from sides of disher. Removed broken piece of connector assy still attached to hinge. Attached new connector assy to hinge then looped it around pulley with spring attached to opposite end. Need both hands to pull spring up to side of tub and connect it. I would suggest replacing both connector assemblies while you have the dishwasher pulled out. Push dishwasher back in and mount with screws. Read more...
ROLLER ASSEMBLY – Part Number: 4581DD3003C
Your Price
$9.33
   In Stock
LG Dishwasher ROLLER ASSEMBLY
★★★★★
★★★★★
1 Review
PartSelect Number PS12075858
Manufacturer Part Number 4581DD3003C
The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the track in your dishwasher, makes noises, the door will not close, or the dishes are not getting clean, then it is best to replace it for more security. A flat blade screw driver is the only tool needed for this installation. Open the lower dishwasher rack and remove retaining tabs from both ends of the rack and slide it out. Locate the older roll assembly, remove it and replace the rollers. Remember to put the tabs on each side back before sliding it back in. Make sure the dishwasher is off before starting this installation project.
Installation Instructions
Lenny from KIRTLAND, OH
Second roller in on the left side was missing don't ask my how, pulling the bottom rack out the rack would dip down i had to lift it up to pull it the rest of the way out.
Ordered the roller from Parts Select, slid the roller over the little spindle sticking out of the bottom rack and snapped it in place. Job done in less than one minute. Read more...
HOLDER – Part Number: MEG64438901
Your Price
$8.81
   In Stock
LG Dishwasher HOLDER
★★★★★
★★★★★
1 Review
PartSelect Number PS12081830
Manufacturer Part Number MEG64438901
This is a dishrack holder designed for various models of LG dishwashers. The purpose of this holder is to secure various parts within the dishwasher, such as the cutlery basket. This holder measures approximately 1 inch long and 0.4 inches wide, is made of plastic, and features two hooks that attach themselves to the frame of the rack. This genuine OEM holder comes as an individual part, so if you require multiple holders, consider that before ordering.
Spring,Hinge – Part Number: 4970ED4004G
Your Price
$17.43
   In Stock
LG Dishwasher Spring,Hinge
★★★★★
★★★★★
2 Reviews
PartSelect Number PS3524564
Manufacturer Part Number 4970ED4004G
The door spring, used in dishwashers, adds tension to the door through the door hinge to keep it from opening too fast. If you have a door latch failure or your washer door drops too quickly when opened, it is best you replace this part to fix the problem. Refer to the manual provided by the manufacturer for installation instructions and further repair guidance. Unplug your dishwasher from the power source before you begin this repair project as a safety precaution.
Fixes these symptoms
Installation Instructions
Gregory L from INDEPENDENCE, OH
Broken door spring allows the door to overextend to the floor if not propped.
Simple, removed screws securing machine in the cabinet, then pull the unit out of the cabinet space about 10 inches. Springs are accessible within this extension. You need strong hands to extend the springs and attach them. Once attached, push machine back in place and re-install the anchor screws. In my situation, only one spring was broken, so the attached side revealed the correct slot to place the hook on the top position, the bottom position has a plastic lead for the spring, and that lead is attached to a rope to the door hinge. Note: Replace BOTH springs, even if only one is broken. Read more...
NOZZLE ASSEMBLY – Part Number: AGB73093001
Your Price
$41.80
   In Stock
LG Dishwasher NOZZLE ASSEMBLY
★★★★★
★★★★★
22 Reviews
PartSelect Number PS7788355
Manufacturer Part Number AGB73093001
This nozzle assembly, commonly referred to as a sprayer head or spray arm, is an authentic replacement part supplied directly by LG for use in LG dishwashers. The nozzle assembly can be found at the bottom of the dishwasher tub. It is responsible for spraying water onto the dishes and utensils inside the dishwasher using a series of nozzles that release pressure water. Over time, the sprayer head may become clogged due to a build of debris and soap residue, or it may also be damaged by a falling item. If the sprayer head is faulty, you will likely notice that your dishes are not cleaned properly after a cycle, and they have spots of leftover soap residue. It is important to replace the sprayer head to keep your dishwasher running efficiently.
Fixes these symptoms
Door Gasket - Black – Part Number: 3920DD3005A
Your Price
$53.51
   In Stock
LG Dishwasher Door Gasket - Black
★★★★★
★★★★★
10 Reviews
PartSelect Number PS3522654
Manufacturer Part Number 3920DD3005A
This is a door gasket for a dishwasher. It creates a watertight seal between the dishwasher door and tub to prevent leaking while the appliance is in use. The gasket is approximately 76 inches long and is black in color. The gasket could become dry and brittle over time which can cause a leak, forcing you to replace it. After removing the old door gasket, clean the empty crevice to ensure a proper seal when you install the replacement gasket. To install the replacement gasket after cleaning the area, simply push the new part into place around the door.
Fixes these symptoms
Installation Instructions
Bruce from Katy, TX
Dishwasher leaking; got AE error almost every other wash
The inside gasket deteriorates over time - However replacement is easy. the main thing you have to remember is after you remove the old gasket, install the new one starting at the middle top of the tub and work your way down both sides. Also, don't push the gasket all the way in...only enough to hold in place. When you close the door the gasket will form a better seal around the door. Read more...
Drain Pump Assembly – Part Number: ABQ73503004
Your Price
$105.08
   In Stock
LG Dishwasher Drain Pump Assembly
★★★★★
★★★★★
19 Reviews
PartSelect Number PS11706890
Manufacturer Part Number ABQ73503004
This drain pump assembly is a genuine OEM replacement part for your dishwasher. In order to complete this repair you will need a Phillips screwdriver, pliers, and a socket. You will need to pull the dishwasher out from the cabinet and lay it on its back in order to access through the bottom and replace the drain pump.
Fixes these symptoms
Installation Instructions
Patrick from CHANDLER, AZ
Water not draining, causing "0E" number to appear and initiatate dishwasher shutdown.
According to your site, the part(s), to consider, to resolve the problem were: 1.Motor Assembly DC Pump, OR 2.Drain Pump. I simply selected the drain pump because it was cheaper and because it was making a clicking noise. (The only significant noise that this dishwasher was making) To be safe, I unplugged the unit and turned off the water, under the sink. I removed the kick plate and I unscrewed the anchor clips from under the counter and carefully pulled the unit out. I then opened the dishwasher and removed the lower rack. To minimize water clean-up, I took a rag and soaked up the standing water in the bottom until it was nearly dry. I then tipped the dishwasher on it's left side, knowing where the location of the drain pump (front, right), would be in an easier location for me to work. I first unplugged the pumps wiring. Then, with pliers, I was able to disconnect the clips on the short, rubber hoses that hold the pump in alignment.(Use caution: If reusing the same rubber hose(s) on the new pump, it will be easier if you put them on in the same direction as they were take off) Then I removed the rubber supports off their hooks, that allow the pump to hang from the bottom of the dishwasher. Once the rubber hoses are re-connected on the new pump and placed on to it's former proper alignment, you can re-attach the rubber supports to their hooks. And last, but not least, remember to plug the new pump's wires back in place. Carefully stand up dishwasher and push it slowly back into place. I plugged in the unit and turned on the water. Before I screwed the unit back to the counter and kick plate back on the front, I ran a load and watched for leaks beneath the new pumps area. No leaks. "Easy, Peasy". Read more...
RACK ASSEMBLY – Part Number: AHB32983761
Your Price
$218.49
   In Stock
LG Dishwasher RACK ASSEMBLY
★★★★★
★★★★★
3 Reviews
PartSelect Number PS7788835
Manufacturer Part Number AHB32983761
Installation Instructions
Gary from CHARLOTTE, MI
The racks were rusted
We replaced the rusty with the new ones. Read more...
HOSE ASSY, DRAIN – Part Number: AEM74333104
Your Price
$68.36
   In Stock
LG Dishwasher HOSE ASSY, DRAIN
★★★★★
★★★★★
3 Reviews
PartSelect Number PS16621806
Manufacturer Part Number AEM74333104
This LG drain hose assembly is a genuine OEM replacement that is compatible with various LG washers. The assembly includes the hose and plastic connectors. The flexible rubber hose transports used water from the washer tub out into a dedicated drainage system such as a laundry sink or standpipe. The drain hose may become clogged, dislodged, or damaged by loose items like coins in the laundry or by hard impacts from outside. If the hose is faulty, you will likely notice standing water in the washer tub after a cycle, mold growth, leaking, or water overflow. It is recommended to replace the drain hose promptly if it is faulty to ensure the proper functioning of your washer.
Fixes these symptoms

LG Dishwasher Appliance Types

Back to Top

Related LG Dishwasher Parts

Back to Top

Popular LG Dishwasher Models

Below are the most popular LG Dishwasher models we have. Enter your model number in the search box to find your model.

Need Help Finding Your Model Number?
View More
Back to Top