Lawn Boy Snow Blower Parts

Shop By Appliance Type Shop By Part Type

Popular Lawn Boy Snow Blower Parts

Your Price

$3.99

Lawn Boy Snow Blower Nut-Lock, Ni

PartSelect Number PS8953555

Manufacturer Part Number 3296-42

This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place, on the impeller assembly. These nuts are a one-time use part due to their locking mechanism. You'll know the nut has broken when it appears to have damaged threads or rounded off edges. Customers found this to be an easy repair.

Your Price

$6.57

Lawn Boy Snow Blower Bulb-Primer

★★★★★

1 Review

PartSelect Number PS9056413

Manufacturer Part Number 66-7460

This manufacturer-certified Primer Bulb is a black rubber part which comes individually sold. It is used to pump fuel from the fuel tank to the carburetor to start the engine. Installation is rated as "Easy" by customers, and will require a screwdriver and pliers. The part attaches to the primer assembly. If the bulb breaks due to wear/fatigue/damage you will see fuel leaking, and the part should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.

Your Price

$3.99

Lawn Boy Snow Blower Ring-Retaining

PartSelect Number PS8950132

Manufacturer Part Number 32151-61

This metal retaining ring, otherwise known as a snap ring, holds parts in place in your lawn equipment, such as blades, shafts, pulleys, or other rotating components, to prevent them from sliding off or shifting. A broken ring may be warped, cracked, or have missing sections. You can tell if it is damaged when the components in your machine are wobbly or falling off. To remove a retaining ring, you will need a pair of needle-nose pliers or lock/snap ring pliers that fit into the grooves of the ring. By using the pliers to release the tension on the ring, you can carefully slide it off the machine. Consult your user manual for instructions on the removal process and to confirm how many rings your machine will need. This replacement part is sold individually and is produced by the original equipment manufacturer so that it precisely fits your machine.

Your Price

$9.96

Lawn Boy Snow Blower Body-Primer

PartSelect Number PS8971120

Manufacturer Part Number 44-2750

Your Price

$3.99

Lawn Boy Snow Blower Guide-Cable

★★★★★

1 Review

PartSelect Number PS8845311

Manufacturer Part Number 114-7988

Your Price

$3.99

Lawn Boy Snow Blower Nut-Lock, Ni

PartSelect Number PS9276436

Manufacturer Part Number 3296-29

The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.

Your Price

$14.32

Lawn Boy Snow Blower Bearing-Ball

PartSelect Number PS8960493

Manufacturer Part Number 38-7820

This metal ball bearing reduces friction and evenly distributes weight among the rotating parts in your lawn equipment. These bearings can be found in various areas such as the wheels, in pulleys, blades or augers. When the bearing is damaged, you may notice a few things. Your machine may produce rough or grinding noises and excessively play or wobble. The affected part may also become stuck. Immediate replacement is necessary to prevent increased friction, inefficient performance, and potential equipment failure. Removing the bearing depends on your model, so consult your user manual for guidance. You will need to use a screwdriver or pliers to remove the surrounding components around the bearing and a bearing puller, pry bar, or mallet to release the bearing itself from its housing. As ball bearings wear out together, it is advisable to replace all of them at once. Ensure you verify the number of bearings your machine needs before purchasing this OEM replacement part as it is sold individually.