MTD Blower Parts

Primer and Hose Assembly – Part Number: 791-683974B

Your Price

$22.96

PartSelect Number PS10014772

Manufacturer Part Number 791-683974B

This manufacturer-certified primer and hose assembly includes the primer bulb, the primer bulb housing, and the fuel line. Any or all of the clear plastic parts in this assembly may experience wear and tear over time that cause fuel to leak due to cracking or blockages. If they are not functioning, these parts will fail in their function of supplying fuel from the tank to the carburetor. This is an easy repair, which can be made by identifying the location of the parts, between the fuel tank and the carburetor, and reinstalling them with no special tools required. When installing, make sure the fuel lines are tight to prevent leaks and fire hazards.

Fixes these symptoms

Will Not Start
See more...

Fuel Line and Filter – Part Number: 791-682039

Your Price

$16.80

MTD Blower Fuel Line and Filter

★★★★★

2 Reviews

PartSelect Number PS10014709

Manufacturer Part Number 791-682039

This OEM fuel line and filter supply fuel from the tank of your engine to its carburetor. Made of clear plastic and sold individually, the fuel line may end up clogged or cracked, causing fuel to leak as a result of general wear and tear. The filter may also end up damaged or clogged over time, and shold be replaced regularly as a part of proper engine maintenance. Luckily, this is an easy repair that requires no tools to carry out.

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

Howard from NEWBURGH, IN

Dry rot hoses

Took off old and new parts went right in place. Read more...

Impeller Assembly – Part Number: 753-08491

Your Price

$7.90

MTD Blower Impeller Assembly

PartSelect Number PS16429077

Manufacturer Part Number 753-08491

This is an impeller assembly kit designed for use with various models of leaf blower and comes with all the hardware necessary to replace it, including the impeller, the securing nut and 1 washer for each side of the impeller. If you notice the blowing power of the leaf blower is reduced or that there is any physical damage to the impeller like bent or cracked blades, the impeller needs to be replaced immediately. When replacing the impeller, you will need a screwdriver or wrench to remove the impeller cover, and you should ensure you use proper safety equipment like gloves.

Fuel Return Line – Part Number: 791-181086

Your Price

$7.14

MTD Blower Fuel Return Line

★★★★★

2 Reviews

PartSelect Number PS9137685

Manufacturer Part Number 791-181086

The OEM fuel return line, or fuel return tube, is a clear plastic line that returns fuel from the primer bulb back into the fuel tank of your engine. You will know your fuel return line is in need of replacement if cracks or leaks have begun appearing, and fuel is leaking from your carburetor. This part is sold individually, and you will know if it is right for your engine by checking your model number or owners manual. One end of the line will attach to the primer bulb, and the other to the fuel tank; make sure all fuel lines are tight when completing this repair, to prevent leaks and fire hazard risks. Most customers rated this repair as easy.

Installation Instructions

Howard from NEWBURGH, IN

Dry rot hoses

Took off old and new parts went right in place. Read more...

Air Cleaner Filter – Part Number: 791-180350B

Your Price

$10.65

MTD Blower Air Cleaner Filter

PartSelect Number PS10013535

Manufacturer Part Number 791-180350B

The manufacturer-certified Air Cleaner Filter is a grey foam filter used to prevent debris and dirt from entering the carburetor and engine, causing damage. Installation is rated as "Easy". This filter may become clogged and cause the engine to run rough due the restricted air flow, at which time the filter should be replaced. This filter is placed inside the air cleaner housing.

Lawn Mower Ground Drive Belt – Part Number: 954-04032B

Your Price

$26.85

MTD Blower Lawn Mower Ground Drive Belt

★★★★★

1 Review

PartSelect Number PS9172714

Manufacturer Part Number 954-04032B

3/8 x 36-1/8-inch This ground drive belt (part number 954-04032B) is for lawn mowers. Ground drive belt 954-04032B drives the transmission, which propels the lawn mower wheels. Wear work gloves to protect your hands when installing this part.

Vacuum Bag Assembly, Oval Inlet – Part Number: 753-04465

Your Price

$77.55

MTD Blower Vacuum Bag Assembly, Oval Inlet

PartSelect Number PS10009211

Manufacturer Part Number 753-04465

This replacement vacuum bag collects and stores debris in your handheld blower. It is made from fabric and has an oval inlet and a fastening mechanism. A broken vacuum bag will leak or have visible tears, holes, or frayed edges. If it becomes clogged, you may notice reduced suction from your blower. It is strongly recommended to replace a broken vacuum bag assembly promptly, as debris can escape during blower operation. To remove the bag, locate its attachment point. You need to depress the two tabs at the oval end of the bag to release it from your machine. Please be aware that this authentic OEM vacuum bag is sold individually.

Fuel Pick-Up Line with Filter – Part Number: 791-182353

Your Price

$10.14

MTD Blower Fuel Pick-Up Line with Filter

★★★★★

1 Review

PartSelect Number PS10014339

Manufacturer Part Number 791-182353

The Fuel Pick Up Line with Filter is an OEM plastic part used to filter and deliver fuel to the carburetor. If broken, the engine will not get fuel and the part should be replaced. This part is rated "Easy" to install and only requires a set of pliers.

Star Knob 5/16-18 – Part Number: 720-04072A

Your Price

$7.00

MTD Blower Star Knob 5/16-18

PartSelect Number PS9109078

Manufacturer Part Number 720-04072A

This Star Knob, which may also be simply referred to as a Knob, is sourced directly from the manufacturer for use in lawn mowers and snow blowers. This part provides a quick-release for handles to fold down, and connect upper and lower handles. It is made of metal, is black, is not part of a kit or assembly, and is sold individually. This part will need to be replaced if it has become cracked, worn, or damaged. The most common cause for this part needing to be replaced is worn or stripped threads no longer being able to grip. You will need a wrench or socket set and a torque wrench to complete this repair. It should be torqued to the manufacturer's recommendation. Customers rate this repair as Easy.