0059930 (6328098 - 6328339) Generac Pressure Washer - Overview
Sections of the 0059930
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".

Generator Plug Spark
PartSelect #: PS9874845
Manufacturer #: 0J00620106
Upgrade your lawn and garden equipment with the Generac Spark Plug. This premium component is designed to produce the spark that ignites the fuel in the engine, enhancing performance and efficiency. C...
$21.40
In Stock

Recoil Starter
PartSelect #: PS12606347
Manufacturer #: 0J08071SRV
Assy; recoil starter 212cc
$57.84
On Order

Screen Filter
PartSelect #: PS12598392
Manufacturer #: 0J1444
Screen-garden hose inlet
$7.29
In Stock
Questions And Answers for 0059930
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No spark. rotted high tension spark plug wire
Removed the machines face plate by drilling out the push pins, removed the air filter assembly. removed throttle linkage, removed anchors of the spark wire from motor housing, removed the recoil start assembly. removed the bolts holding the coil assembly. installed the new coil assembly and placed business card between the coil and the ma
... Read more
gnetic section of the flywheel to secure the proper gap.
Reverse the process and reinstall all the assemblies noted above. I took pictures with my cellphone to ensure that the throttle linkage was properly re-installed.
Reverse the process and reinstall all the assemblies noted above. I took pictures with my cellphone to ensure that the throttle linkage was properly re-installed.
Read less
Parts Used:
-
Stanton from PHILPOT, KY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!