Back
Back
Keep typing for more specific results...

006022-0 Generac Pressure Washer - Overview

Sections of the 006022-0

[Viewing 24 of 24]
Keep searches simple, eg. "belt" or "pump".
Outlet Fitting – Part Number: 0H95650123
Outlet Fitting
PartSelect #: PS11923444
Manufacturer #: 0H95650123
$69.42
  In Stock
Gun Assembly – Part Number: 0H9642A
Gun Assembly
PartSelect #: PS11923452
Manufacturer #: 0H9642A
$68.78
  Special Order
O-Ring – Part Number: 0H95650124
O-Ring
PartSelect #: PS11923445
Manufacturer #: 0H95650124
$3.99
  On Order
Grommet-Nozzle – Part Number: 0J3079
Grommet-Nozzle
PartSelect #: PS11923465
Manufacturer #: 0J3079
$20.86
  Special Order
Fastener Ribbed Shank – Part Number: 0J1449
Fastener Ribbed Shank
PartSelect #: PS11923456
Manufacturer #: 0J1449
$3.99
  Special Order
Vibration Mount 1-1/4" OD – Part Number: 0J2229
Vibration Mount 1-1/4" OD
PartSelect #: PS11923458
Manufacturer #: 0J2229
$5.95
  In Stock
Screw BHSP M6 x 19mm – Part Number: 0J1545
Screw BHSP M6 x 19mm
PartSelect #: PS11923457
Manufacturer #: 0J1545
$3.99
  In Stock
Fitting Suction – Part Number: 0H95650121
Fitting Suction
PartSelect #: PS11923443
Manufacturer #: 0H95650121
$69.98
  Special Order
Generator Plug Spark – Part Number: 0J00620106
Generator Plug Spark
PartSelect #: PS9874845
Manufacturer #: 0J00620106
Upgrade your lawn and garden equipment with the Generac Spark Plug. This premium component is designed to produce the spark that ignites the fuel in the engine, enhancing performance and efficiency. C...
$21.40
  In Stock
Hook-Hose – Part Number: 0J3052
Hook-Hose
PartSelect #: PS11923463
Manufacturer #: 0J3052
$3.99
  Special Order
Screw SHC M8-1.25 x 25 C8.8 – Part Number: 0J3315
Screw SHC M8-1.25 x 25 C8.8
PartSelect #: PS11923466
Manufacturer #: 0J3315
$3.99
  Special Order
Screw M6-1.0 x 45 – Part Number: 0J3331
Screw M6-1.0 x 45
PartSelect #: PS11923468
Manufacturer #: 0J3331
$3.99
  Special Order

Questions And Answers for 006022-0

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No spark. rotted high tension spark plug wire
Removed the machines face plate by drilling out the push pins, removed the air filter assembly. removed throttle linkage, removed anchors of the spark wire from motor housing, removed the recoil start assembly. removed the bolts holding the coil assembly. installed the new coil assembly and placed business card between the coil and the magnetic section of the flywheel to secure the proper gap.

Reverse the process and reinstall all the assemblies noted above. I took pictures with my cellphone to ensure that the throttle linkage was properly re-installed.
Parts Used:
Ignition Coil Assembly
  • Stanton from PHILPOT, KY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!