0065980 Generac Pressure Washer - Overview
Models starting with 0065980
Click on the best match to narrow your results.
- 0065980 (8736193 - 8736290) Generac Pressure Washer (Generac Pressure Washer Model 0065980/SERIAL: 8736193 - 8736290 (0065980/SERIAL:87361938736290, 0065980/SERIAL: 8736193 8736290) Parts)
- 0065980 (8702175 - 8703075) Generac Pressure Washer (Generac Pressure Washer Model 0065980/SERIAL: 8702175 - 8703075 (0065980/SERIAL:87021758703075, 0065980/SERIAL: 8702175 8703075) Parts)
- 0065980 (8736462 - 8737828) Generac Pressure Washer (Generac Pressure Washer Model 0065980/SERIAL: 8736462 - 8737828 (0065980/SERIAL:87364628737828, 0065980/SERIAL: 8736462 8737828) Parts)
- 0065980 ( 9062509 - 9129065 2014 ) Generac Pressure Washer (3100 Psi Pressure Washer)
- 0065980 ( 9154760 - 10031614 2015 ) Generac Pressure Washer (3100 Psi Pressure Washer)
- 0065980 ( 8664209 - 9019718 2014 ) Generac Pressure Washer (3100 Psi Pressure Washer)
Keep searches simple, eg. "belt" or "pump".
Generator Plug Spark
PartSelect #: PS9874845
Manufacturer #: 0J00620106
Upgrade your lawn and garden equipment with the Generac Spark Plug. This premium component is designed to produce the spark that ignites the fuel in the engine, enhancing performance and efficiency. C...
$21.40
In Stock
Valve Cover Gasket
PartSelect #: PS12607178
Manufacturer #: 0J88870103
Valve cover gasket
$5.95
In Stock
Exact Part matches for your search term
[Viewing 1 of 1]
Stator
This part number matches the current model number 0065980
PartSelect #: PS11872327
Manufacturer #: 0065980
No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No spark. rotted high tension spark plug wire
Removed the machines face plate by drilling out the push pins, removed the air filter assembly. removed throttle linkage, removed anchors of the spark wire from motor housing, removed the recoil start assembly. removed the bolts holding the coil assembly. installed the new coil assembly and placed business card between the coil and the ma
... Read more
gnetic section of the flywheel to secure the proper gap.
Reverse the process and reinstall all the assemblies noted above. I took pictures with my cellphone to ensure that the throttle linkage was properly re-installed.
Reverse the process and reinstall all the assemblies noted above. I took pictures with my cellphone to ensure that the throttle linkage was properly re-installed.
Read less
Parts Used:
-
Stanton from PHILPOT, KY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!