110689174 Kenmore Dryer - Overview
Sections of the 110689174
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Dryer Igniter Kit
PartSelect #: PS334180
Manufacturer #: 279311
If your dryer will not heat, takes too long to dry, or does not provide enough heat, you might want to replace your igniter kit. This silicone carbide igniter with ceramic holder kit includes the 3-in...
$35.67
In Stock
Dryer Screw
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$7.95
In Stock
Dryer Screw
PartSelect #: PS11743744
Manufacturer #: WP681414
This screw is sold individually.
$7.95
In Stock
Dryer Natural Gas Orifice
PartSelect #: PS11740485
Manufacturer #: WP234826
Introducing the Whirlpool Natural Gas Orifice for Dryer Gas Valve, a genuine OEM part specifically designed for select models of Whirlpool dryers. Renowned for its superior functionality, this Burner ...
$25.95
In Stock
Refrigerator Screw
PartSelect #: PS11742733
Manufacturer #: WP489128
This screw is sold individually.
$11.95
In Stock
Burner Gas
PartSelect #: PS334346
Manufacturer #: 279894
Introducing the Whirlpool Gas Burner, an essential appliance, designed specifically for efficient heating and cooking. This high-quality burner, manufactured by Whirlpool, is built for longevity and r...
$172.00
In Stock
Questions And Answers for 110689174
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 110689174
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No heat to dry clothes
First I took the front of the dryer off then located the igniter. It only required removing two screws, removing old igniter, replacing with new igniter, and replacing the two screws.. While I was replacing the igniter I took the drum out and throughly cleaned the inside. Lucky me, I found 85 cents on the floor of the dryer. I am 65yr
... Read more
s old, married and mother of two.
This was easy to do and sure saved money. I reccommend others try to do repairs for themselves and using PartSelect was less expensive too.
This was easy to do and sure saved money. I reccommend others try to do repairs for themselves and using PartSelect was less expensive too.
Read less
Parts Used:
-
Karen from Pine Mtn. Club,, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
66 of 76 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no heat
the ignitor did not glow red checked thermal fuse by exhaust duct. fuse open replaced thermal fuse
Parts Used:
-
rex from streator, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Wrench (Adjustable)
30 of 39 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer stoped heating
the problem was not the igniter its was the thermal fuse I broke the igniter during inspection of the problem be careful its a very easy thing to break repairs complete thank you parts select for the quick shipping and low prices
Parts Used:
-
valerie from Elasmore, KS
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
23 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!