21864 (413000000 - 999999999) Toro Lawn Mower - Overview
Sections of the 21864
[Viewing 11 of 11]Keep searches simple, eg. "belt" or "pump".

Lawn Mower Stepped Washer
PartSelect #: PS9048394
Manufacturer #: 614426
The Stepped Washer is used to secure the wheels onto the shaft of a push mower. It attaches to the wheel axle. If broken due to wear/fatigue, the wheel will come off and the part should be replaced. I...
$4.13
In Stock

Retaining Ring
PartSelect #: PS8950132
Manufacturer #: 32151-61
For all your repair needs, look no further than this Genuine Toro Ring-Retaining. Perfect for various appliance repair tasks, this Toro OEM part epitomizes robustness and durability. Crafted to the hi...
$6.15
In Stock

Lawn Mower Blade Support
PartSelect #: PS9257416
Manufacturer #: 108-3766-03
The Blade Support is a 6-x-3-inch Black, metal part used to support the blade. It's rated as "Easy" to install by customers. It must be torqued to manufacturer specifications which will require a sock...
$11.59
In Stock
Exact Part matches for your search term
[Viewing 1 of 1]
Motor Mounting Brkt
This part number matches the current model number 21864
PartSelect #: PS10424402
Manufacturer #: 21864
No Longer Available
Questions And Answers for 21864
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wheel height adjuster lever (spring steel) cracked / split in two.
Tip mower onto side, raising side to be repaired. Empty gas tank if possible or use rags to prevent gasoline drips onto clean surfaces.
Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height ... Read more assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height ... Read more assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Read less
Parts Used:
-
Ray from YARDLEY, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set, Wrench set
4 of 22 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!