Models > 225581981

225581981 Craftsman Cultivator - Overview

Sections of the 225581981

[Viewing 13 of 13]
Keep searches simple, eg. "belt" or "pump".
Filter – Part Number: 17816
Filter
★★★★★
★★★★★
(1)
PartSelect #: PS9909093
Manufacturer #: 17816
  No Longer Available
Hose Combo – Part Number: 16928
Hose Combo
PartSelect #: PS9901314
Manufacturer #: 16928
  No Longer Available
Screw – Part Number: 1755
Screw
PartSelect #: PS9907885
Manufacturer #: 1755
  No Longer Available
Blade Guard – Part Number: 2042
Blade Guard
PartSelect #: PS11947001
Manufacturer #: 2042
  No Longer Available
Retainer – Part Number: 1111
Retainer
PartSelect #: PS11934902
Manufacturer #: 1111
  No Longer Available
Ring – Part Number: 73082
Ring
PartSelect #: PS16415172
Manufacturer #: 73082
  No Longer Available
Pulley shaft – Part Number: 10238
Pulley shaft
PartSelect #: PS12405040
Manufacturer #: 10238
  No Longer Available
Bumper – Part Number: 12378
Bumper
PartSelect #: PS12400080
Manufacturer #: 12378
  No Longer Available
Bolt – Part Number: 468037-1
Bolt
PartSelect #: PS16341338
Manufacturer #: 468037-1
  No Longer Available
Nut, 8-pack – Part Number: 1803
Nut, 8-pack
PartSelect #: PS16302010
Manufacturer #: 1803
  No Longer Available
Idler pulley – Part Number: 10236
Idler pulley
PartSelect #: PS12396748
Manufacturer #: 10236
  No Longer Available
Reel Drive Knob – Part Number: 2209
Reel Drive Knob
PartSelect #: PS11947864
Manufacturer #: 2209
  No Longer Available

Questions And Answers for 225581981

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The hose was broken - separated from the connector
I was disappointed to find the hose kit to not be correct, since the information on the site said it would work for my model. After trying various combinations of ends I decided to modify my existing connector. It had a ridge that would not let the hose coupler go on. I was able to grind that ridge off. I then fitted the connector over the end, after putting waterproof adhesive on the end. I let that set up for 4 hours, then inserted the hose inside the other end. So far it is holding.
Parts Used:
Hose Combo
  • Gary from WILLMAR, MN
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!