Models > 225587503

225587503 Craftsman Cultivator - Overview

Sections of the 225587503

[Viewing 15 of 15]
Keep searches simple, eg. "belt" or "pump".
Filter – Part Number: 17816
Filter
★★★★★
★★★★★
(1)
PartSelect #: PS9909093
Manufacturer #: 17816
  No Longer Available
Hose Combo – Part Number: 16928
Hose Combo
PartSelect #: PS9901314
Manufacturer #: 16928
  No Longer Available
Screw – Part Number: 1755
Screw
PartSelect #: PS9907885
Manufacturer #: 1755
  No Longer Available
Pad – Part Number: 521661-1
Pad
PartSelect #: PS16350754
Manufacturer #: 521661-1
  No Longer Available
Rectifier – Part Number: 1371
Rectifier
PartSelect #: PS11937697
Manufacturer #: 1371
  No Longer Available
Cylinder – Part Number: 12066
Cylinder
PartSelect #: PS10196928
Manufacturer #: 12066
  No Longer Available
Lanyard – Part Number: 702329
Lanyard
PartSelect #: PS16400537
Manufacturer #: 702329
  No Longer Available
Pulley shaft – Part Number: 10238
Pulley shaft
PartSelect #: PS12405040
Manufacturer #: 10238
  No Longer Available
Bumper – Part Number: 12378
Bumper
PartSelect #: PS12400080
Manufacturer #: 12378
  No Longer Available
Bracket – Part Number: 702427
Bracket
PartSelect #: PS16400563
Manufacturer #: 702427
  No Longer Available
Pin – Part Number: 521728
Pin
PartSelect #: PS16350771
Manufacturer #: 521728
  No Longer Available
Rod – Part Number: 521705-1
Rod
PartSelect #: PS16350767
Manufacturer #: 521705-1
  No Longer Available

Questions And Answers for 225587503

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The hose was broken - separated from the connector
I was disappointed to find the hose kit to not be correct, since the information on the site said it would work for my model. After trying various combinations of ends I decided to modify my existing connector. It had a ridge that would not let the hose coupler go on. I was able to grind that ridge off. I then fitted the connector over the end, after putting waterproof adhesive on the end. I let that set up for 4 hours, then inserted the hose inside the other end. So far it is holding.
Parts Used:
Hose Combo
  • Gary from WILLMAR, MN
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!