Models > 24A-070F766

24A-070F766 ((CSV070)(2005)) Troy-Bilt Chipper Shredder - Overview

Sections of the 24A-070F766

[Viewing 2 of 2]
Frame And Handle Diagram and Parts List for (CSV070)(2005) Troy-Bilt Chipper Shredder
Frame And Handle
Impeller Assembly Diagram and Parts List for (CSV070)(2005) Troy-Bilt Chipper Shredder
Impeller Assembly
Keep searches simple, eg. "belt" or "pump".
Front Lawn Mower Drive Wheel – Part Number: 734-04018C
Front Lawn Mower Drive Wheel
★★★★★
★★★★★
(10)
PartSelect #: PS9455101
Manufacturer #: 734-04018C
This is a genuine OEM replacement part, it is sold individually. This is the front wheel on the models shown below. There are two of them on each mower. The wheel has a ring gear on the inside whic...
  No Longer Available
Lawn Mower Wheel – Part Number: 753-08091
Lawn Mower Wheel
PartSelect #: PS10009800
Manufacturer #: 753-08091
8 x 2.125 This wheel is for lawn mowers. Wear work gloves to protect your hands when installing this part.
  No Longer Available
Chipper Blade – Part Number: 981-0490
Chipper Blade
PartSelect #: PS9462700
Manufacturer #: 981-0490
The Chipper blade attaches to the impeller and is used for cutting. Installation is rated as "Easy" and requires pliers, a socket set, wrench set, and allen wrench set. A dull blade must be sharpened ...
  No Longer Available
Nozzle Door – Part Number: 731-2294A
Nozzle Door
PartSelect #: PS9454852
Manufacturer #: 731-2294A
  No Longer Available
Nozzle Door Torsion Spring – Part Number: 732-1151A
Nozzle Door Torsion Spring
PartSelect #: PS9455082
Manufacturer #: 732-1151A
  No Longer Available
Hex Flange Bearing – Part Number: 741-04108
Hex Flange Bearing
PartSelect #: PS9113035
Manufacturer #: 741-04108
  No Longer Available
Screw, #10-16, 0.500 – Part Number: 910-0224
Screw, #10-16, 0.500
PartSelect #: PS9460420
Manufacturer #: 910-0224
  No Longer Available
Hose Adapter – Part Number: 731-2292
Hose Adapter
PartSelect #: PS9454851
Manufacturer #: 731-2292
  No Longer Available
Bag – Part Number: 664-04029
Bag
PartSelect #: PS9452551
Manufacturer #: 664-04029
  No Longer Available
Nozzle Door Lever – Part Number: 731-04967
Nozzle Door Lever
PartSelect #: PS9454519
Manufacturer #: 731-04967
  No Longer Available
4" Vacuum Hose – Part Number: 764-0648A
4" Vacuum Hose
★★★★★
★★★★★
(1)
PartSelect #: PS9457750
Manufacturer #: 764-0648A
  No Longer Available
Wire Harness – Part Number: 629-0920A
Wire Harness
PartSelect #: PS9452305
Manufacturer #: 629-0920A
  No Longer Available
View More
Back to Top

Questions And Answers for 24A-070F766

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Front drive wheels were wore out
Unbolted old wheels and bolted new wheels to my lawn mower
Parts Used:
Front Lawn Mower Drive Wheel
  • Ronald from WAYNE, MI
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Not the exact fit
I had to drill and tap the ends of the axle and put a 1/4” bolt in to fasten the wheels. The hubs were not the same. They fastened differently.
Parts Used:
Front Lawn Mower Drive Wheel
  • Jay from GERRY, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The treads on the front drive wheels were worn down to the point that they provided little traction.
Removed a single nut on each end of the drive shaft with the appropriate socket. Wheels then slipped off. Cleaned/polished the shaft with fine sandpaper, lubed with silicone spray, slid on the wheels and reinstalled the nuts with the same socket. Wheels were an exact fit and OEM quality. Done in 15 minutes start to finish.
Parts Used:
Front Lawn Mower Drive Wheel
  • MICHAEL from Kennewick, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top