Back
Back
Keep typing for more specific results...

2538385290 Kenmore Refrigerator - Overview

Sections of the 2538385290

[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Icemaker Water Inlet Tube – Part Number: 215454600
Icemaker Water Inlet Tube
PartSelect #: PS422901
Manufacturer #: 215454600
  No Longer Available
Icemaker Water Inlet Valve Adapter – Part Number: 5308000205
Icemaker Water Inlet Valve Adapter
PartSelect #: PS473213
Manufacturer #: 5308000205
  No Longer Available
Plastic Water Line Nut – Part Number: 218731600
Plastic Water Line Nut
PartSelect #: PS428589
Manufacturer #: 218731600
$50.95
  Special Order
SCREW – Part Number: 5308000039
SCREW
PartSelect #: PS473182
Manufacturer #: 5308000039
$18.95
  In Stock
Order within the next 3 hrs and your part ships today!
USE WCI 5303015353 – Part Number: 3015069
USE WCI 5303015353
PartSelect #: PS819113
Manufacturer #: 3015069
  No Longer Available
GRIP-REF. DOOR HANDLE – Part Number: 3015354
GRIP-REF. DOOR HANDLE
PartSelect #: PS819169
Manufacturer #: 3015354
$15.95
  Special Order
BEARING HINGE (4) (NON-ILLUSTRATED) – Part Number: 183138
BEARING HINGE (4) (NON-ILLUSTRATED)
PartSelect #: PS644292
Manufacturer #: 183138
  No Longer Available
HINGE COVER-COFFEE – Part Number: 183558-10
HINGE COVER-COFFEE
PartSelect #: PS644470
Manufacturer #: 183558-10
  No Longer Available
COVER-EVAPORATOR COIL – Part Number: 163290
COVER-EVAPORATOR COIL
PartSelect #: PS646323
Manufacturer #: 163290
  No Longer Available
DISCONTINUED – Part Number: 5316469832
DISCONTINUED
PartSelect #: PS474917
Manufacturer #: 5316469832
$66.95
  Special Order
RING – Part Number: G085642
RING
PartSelect #: PS488411
Manufacturer #: G085642
$7.95
  Special Order
CLAMP-HARNESS MOUNTING – Part Number: 27669
CLAMP-HARNESS MOUNTING
PartSelect #: PS632935
Manufacturer #: 27669
  No Longer Available

Questions And Answers for 2538385290

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Adaptor leaking due to old rubber washer
Turned off water. Took cardboard backing off lower back of unit. Unscrewed the old adaptor from the water distributor. Unscrewed the water hose connection from the adaptor. Put plumbers tape on new adaptor. Re-connected water hose to new adaptor and re-attached the adaptor to the water distributor. Turned water on, checked for leaks, and tightened adaptor to water distributor until leak stopped (approximately a quarter turn) after hand tightening. Easy, hardest part was pulling out the unit and putting it back in place!
Parts Used:
Icemaker Water Inlet Valve Adapter
  • Patrick from Midlothian, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!