325RDX Husqvarna - Overview
Models starting with 325RDX
Click on the best match to narrow your results.
- 325RDX (325 RDX 2002-01) Husqvarna Trimmer (Trimmer)
- 325RDX (20020100001-20051800000) Husqvarna Brush Cutter (325 Rdx (20020100001-20051800000))
- 325RDX (20051800001-Current) Husqvarna Brush Cutter (325 Rdx (20051800001-Current))
- 325RDX (2005-05) Husqvarna Brush Cutter (325 Rdx (2005-05))
- 325RDX (20051800001 & Above) Husqvarna Trimmer (String Trimmer)
Keep searches simple, eg. "belt" or "pump".
Trimmer Air Purge
PartSelect #: PS9282918
Manufacturer #: 503936601
This is an air purge for various lawn and garden equipment. The air purge may also be known as the primer bulb, and it is made for small engines. This part circulates fuel into the carburetor of your ...
$14.29
On Order
Trimmer Oiled Air Filter
PartSelect #: PS9020811
Manufacturer #: 537186301
This ready-oiled air filter is an OEM part that traps dirt and debris, preventing them from entering the engine. This part is black, comprised of foam, and is sold individually. Your air filter may be...
$7.53
In Stock
Trimmer Hose
PartSelect #: PS9020992
Manufacturer #: 537042401
This OEM fuel line, or hose, is a 4-inch, clear, plastic tube which is sold individually. It is rated as "Easy" to install. This part connects to the purge assembly and delivers fuel to the carburetor...
$5.29
In Stock
Spark Plug
PartSelect #: PS9484192
Manufacturer #: 952030150
This genuine Spark Plug, RCJ8Y, is sold individually, comprised of steel and ceramic, and is white and silver in color. The function of the spark plug is to ignite a mixture of air and fuel in the com...
$5.71
Special Order
Trimmer Knob
PartSelect #: PS8993624
Manufacturer #: 502204001
The air cleaner knob, just over 1 inch in diameter, is black in color and made of plastic. It is sold individually, and its function is to tighten the air cleaner cover down on various lawn and garden...
$6.21
In Stock
Trimmer Fuel Tank Bushing
PartSelect #: PS11824288
Manufacturer #: 580457501
Used to seal the fuel tank to prevent leaks and allow the fuel line to enter through it, this Fuel Tank Bushing is sourced directly from the manufacturer. It is made of black rubber, is not part of a ...
$7.46
In Stock
Snow Blower Chute
PartSelect #: PS11824789
Manufacturer #: 585056901
This chute base, also known as a discharge chute base, is sourced from the original manufacturer for use with snowblowers. It is found at the end of the discharge chute which is responsible for direct...
$12.71
In Stock
Trimmer Starter Pawl Bridge
PartSelect #: PS9282878
Manufacturer #: 503873305
The Starter Pawl bridge provides the resistance needed for the starter rope to start the trimming engine. It is an OEM part that attaches inside the recoil assembly. If broken due to weaar or fatigue,...
$27.40
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Would not start now runs great
-
JAMES from FAYETTEVILLE, AR
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Weed eater flooded constantly.
Very simple repair...took the old carburetor off and installed the new one. After replacement, the weed eater fired up after the second pull. Cover, removed 4 bolts. Carburetor, three bolts. Removed two hoses, choke handle and installed. Order gasket...never hurts to replace gaskets. One other thing, most important...use premix fuel!!! I
... Read more
use it in all gas powered equipment now. Cleaner and does not gum up filters and carburetor.
Read less
Parts Used:
-
Richard from CHINA GROVE, NC
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
5 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fixed up somebody's old trimmer they threw at the curb
This trimmer was in relatively good shape. Somebody had thrown it out! They thought they had broke the rewind, but when I ended up taking it off, it sucked right back in. They also must have broke the vibration plate on the bottom. With the screws and plate I bought from here, plus a new head and service kit I got elsewhere , this thing r
... Read more
an like a champion again.
Read less
Parts Used:
-
Jeremy from DILLSBURG, PA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
5 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!