3643312593 Kenmore Range - Overview
Sections of the 3643312593
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".

Gas Pressure Regulator
PartSelect #: PS2337785
Manufacturer #: WB19T10078
This comes set from the manufacturer for Natural Gas. It also includes the conversion to Liquid Propane.
This valve automatically cuts off the flow of gas at a certain pressure.
$49.95
In Stock

Large Burner Drip Bowl
PartSelect #: PS244366
Manufacturer #: WB31M11
This part is sold individually. It is white on the top side, and black underneath. Used for gas ranges. You may need to order the drip bowl seal.
No Longer Available

Ignition Spark Switch - Rear Burners
PartSelect #: PS236639
Manufacturer #: WB24K5083
Upgrade your GE cooktop with this Ignition Spark Switch for Rear Burners and feel a new level of efficiency in your cooking! This crucial appliance accessory provides the needed spark for your burner ...
$36.95
In Stock

Small Burner Drip Bowl
PartSelect #: PS244365
Manufacturer #: WB31M10
This part is sold individually. It is white on the top side, and black underneath.
No Longer Available

Ignition Valve Switch - Front Burners
PartSelect #: PS236635
Manufacturer #: WB24K5078
Enhance the performance of your GE cooktop with this Ignition Valve Switch. Exclusively designed for front burners, it utilizes a spark ignition system to effectively ignite the burner, ensuring optim...
$47.95
Special Order
Questions And Answers for 3643312593
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Common Symptoms of the 3643312593
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Failed ignition switch
took me a a while to find my problem. One burner would not spark to ignite gas burner. From Part Select website I noticed the part that was the problem from the parts diagram. I did not realize it was related to ignition until I saw that. Easy and cheap to fix after that.
Parts Used:
-
wally from lake oswego, OR
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
6 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Large and small Burner Drip Bowls needed to be replaced
The drip bowls of my stove had to be replaced. The tough job about this is that the bowls need to be ordered which we did. The order was sent to my house within a couple days. The drip bowls were replaced and they look and work just fine. The gas stove is about 10 yrs old and it needs the parts special ordered now. I used to wash and use
... Read more
a bit of elbow grease but this time it required too much effort. So an easy replacement did the trick.
Read less
Parts Used:
-
Nelda from Carmichael, CA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers, Socket set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner would not light
-
Jimiego from San Diego, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
7 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!