Back
Back
Keep typing for more specific results...

376110 Poulan Lawn Mower - Overview

Sections of the 376110

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Wheel Dust Cover – Part Number: 581840401
Lawn Mower Wheel Dust Cover
★★★★★
★★★★★
(3)
PartSelect #: PS9982436
Manufacturer #: 581840401
The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will...
$6.35
  In Stock
Lawn Mower 21" Blade – Part Number: 532406712
Lawn Mower 21" Blade
PartSelect #: PS9022471
Manufacturer #: 532406712
Discover the power of a pristine cut with the Husqvarna lawn mower mulching blade, designed exclusively for mowers with a generous 21-inch deck. This manufacturer-approved blade doesn't just cut your ...
$20.68
  In Stock
Lawn Mower Engine Control Cable – Part Number: 532183567
Lawn Mower Engine Control Cable
★★★★★
★★★★★
(2)
PartSelect #: PS9015022
Manufacturer #: 532183567
This Genuine OEM blade control cable assembly is designed for use with walk-behind and push lawn mowers. Sold individually, it includes a durable metal wire cable with Z-type bent ends, a rubberized p...
$19.09
  In Stock
Lawn Mower E-Ring – Part Number: 812000058
Lawn Mower E-Ring
PartSelect #: PS9145393
Manufacturer #: 812000058
The E-Ring 7/16 is a 7/16-inch silver, metal part which can be attached to various locations on a variety of equipment to snap into grooves and secure parts into place. This part will require pliers t...
$5.95
  In Stock
Lawn Mower Drive Control Cable – Part Number: 532194653
Lawn Mower Drive Control Cable
★★★★★
★★★★★
(1)
PartSelect #: PS9016384
Manufacturer #: 532194653
Introducing the Husqvarna Drive Control Cable! This high-quality ground drive cable is crucial for the efficiency of your lawn mower. With an impressive length of 65 1/2" and a conduit length of 55 1/...
$27.40
  In Stock
Lawn Mower Hardened Washer – Part Number: 532851074
Lawn Mower Hardened Washer
PartSelect #: PS9019116
Manufacturer #: 532851074
This washer is not part of a kit or assembly. It is sold individually. With an O.D. of 1 inch, this OEM replacement part is made of dark grey metal and is used to provide a tight seal between the mowe...
$4.99
  In Stock
Hex Head Screw 3/8-24x1-3/8 Gr. 8 – Part Number: 532851084
Hex Head Screw 3/8-24x1-3/8 Gr. 8
PartSelect #: PS9026163
Manufacturer #: 532851084
$4.99
  In Stock
Lawn Mower Spring – Part Number: 532193000
Lawn Mower Spring
PartSelect #: PS9016049
Manufacturer #: 532193000
$7.46
  In Stock
Lawn Mower Hinge Rod – Part Number: 532175650
Lawn Mower Hinge Rod
PartSelect #: PS9014084
Manufacturer #: 532175650
$7.53
  In Stock
Locknut, Hex 1/4-20 – Part Number: 873680400
Locknut, Hex 1/4-20
PartSelect #: PS9308352
Manufacturer #: 873680400
This manufacturer-approved 1/4 Hex Nut can be installed using a wrench or socket, and is used to secure parts in place. Refer to your make, model number and diagrams to ensure this is the right part for you.
  No Longer Available
Lawn Mower Hinge Bracket Assembly – Part Number: 532175735
Lawn Mower Hinge Bracket Assembly
PartSelect #: PS9014901
Manufacturer #: 532175735
$6.21
  Special Order
Hairpin Cotter – Part Number: 532051793
Hairpin Cotter
PartSelect #: PS9006491
Manufacturer #: 532051793
  No Longer Available

Questions And Answers for 376110

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Cable was broke.
Pushed the cable through the engine mount.Connected the cable to the engine slider. Pulled cable through the previous tie down connected to the lower end of the bar. Attached the connector on the cable to the hole in the lawn mower bar near the top of the bar.. Attached the top end of the cable to the on/off bar where you push the mower.
Parts Used:
Lawn Mower Engine Control Cable
  • James from ASHTABULA, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drive cable broken
Remove the front drive cover and disconnect the old from the drive, hook the new drive cable to the drive, and connect new cable back to the handle. Reinstalled the drive cover, started unit, and test that the drive was working correctly.
Parts Used:
Lawn Mower Drive Control Cable
  • Frank from AUSTIN, TX
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!