7289 - Overview
Models starting with 7289
Click on the best match to narrow your results.
- 7289-80 Frigidaire Dryer (ELECTRIC DRYER)
- 7289-80A Frigidaire Dryer (ELECTRIC DRYER)
- 7289-80B Frigidaire Dryer (ELECTRIC DRYER)
- 7289-80C Frigidaire Dryer (ELECTRIC DRYER)
- 7289-87 Frigidaire Dryer (ELECTRIC DRYER)
- 7289-87B Frigidaire Dryer (ELECTRIC DRYER)
- 7289-87C Frigidaire Dryer (ELECTRIC DRYER)
- 72890F Hamilton Beach Food Processor (Stack And Presstm 2 Speed Food Chopper (72890f))
- 7289745582 Blomberg Refrigerator (30 Inch Bottom-Freezer Refrigerator Brfb1812ssn)
- 7289745583 Blomberg Refrigerator (30 Inch Bottom-Freezer Refrigerator (Lh Door) Brfb1812ssln)
- 7289745584 Blomberg Refrigerator (Brfb1822ssln 30-Inch Freestanding Bottom Freezer Refrigerato)
- 7289745592 Blomberg Refrigerator (30 Inch Bottom-Freezer Refrigerator Brfb1822ssn)
- 7289747582 Beko Refrigerator (30 Inch Counter Bottom-Freezer Refrigerator Bfbf3018ss)
- 7289749581 Beko Refrigerator (30 Inch Counter Refrigerator (Lh Door) Bfbf3018ssl)
- 7289749594 Beko Refrigerator (30 Inch Bottom-Freezer Refrigerator Bfbf3018ssim)
- 7289749596 Beko Refrigerator (30 Inch Bottom-Freezer Refrigerator (Lh Door) Bfbf3018ssiml)
Keep searches simple, eg. "belt" or "pump".
Rear Drum Bearing Kit
PartSelect #: PS459829
Manufacturer #: 5303281153
This rear drum bearing kit is designed for use with dryers. It supports the rear of the drum in your appliance as it tumbles your clothes during the drying cycle. If your drum will not tumble, or if i...
$44.95
In Stock
Drum Belt
PartSelect #: PS1148434
Manufacturer #: 134503600
This drum belt, often referred to as a drive belt, is used in the assembly of dryers. It goes around the drum, the idler pulley, and the motor pulley. As the armature on the motor spins, this belt is ...
$14.95
In Stock
Upper Drum Glide
PartSelect #: PS470317
Manufacturer #: 5303937139
The upper drum glide is attached to the front panel of your dryer, you can locate it by removing the top portion of your dryer. The drum glide allows the drum to rotate with ease and little sound. The...
$43.95
In Stock
Drum Support Bearing
PartSelect #: PS418807
Manufacturer #: 131825900
If your dryer does not tumble, will not start, is noisy, or is leaving marks on your clothing, you may need to replace the drum support bearing. The drum is supported at the rear by a bearing, which a...
$9.95
In Stock
Door Catch
PartSelect #: PS418433
Manufacturer #: 131658800
The door catch on your dryer is an important part as it keeps your dryer door closed, in order to ensure no air or clothes can escape. This part works by holding the door strike, which allows the door...
$50.91
In Stock
Thermal Limiter (Limit 220)
PartSelect #: PS419402
Manufacturer #: 134120900
The dryer thermal limiter, also known as a thermal fuse, blows the fuse to cut off power to the dryer when the dryer begins to overheat. Once the dryer reached 220 degrees Fahrenheit, the heat cuts ou...
$11.95
In Stock
Lint Screen and Frame
PartSelect #: PS417677
Manufacturer #: 131390300
This filter collects lint as it passes through the dryer vent.
No Longer Available
Drum Bearing Bracket
PartSelect #: PS12579101
Manufacturer #: 131724301
This drum bearing bracket is for dryers. Drum bearing bracket holds and supports the drum bearing
$20.95
In Stock
Flat Style Belt
PartSelect #: PS459830
Manufacturer #: 5303281154
This is a flat style ridgeless dryer belt.
$21.95
In Stock
Idler Pulley Assembly
PartSelect #: PS457526
Manufacturer #: 5303212849
Use this idler pulley assembly with gas or electric clothes dryer that has a flat dryer belt.
***Please NOTE: This part has been redesigned by the manufacturer and may not fit your appliance.
No Longer Available
Front Drum Seal
PartSelect #: PS459776
Manufacturer #: 5303281049
Used with dryers with a 27-inch drum.
No Longer Available
Exact Part matches for your search term
[Viewing 6 of 6]
OVEN THERMOSTAT KNOB
This part number matches the current model number 7289
PartSelect #: PS478795
Manufacturer #: 7289
$35.95
Special Order
Shaft, Cross w/Sprocket
This part number matches the current model number 7289
PartSelect #: PS9112281
Manufacturer #: 7289
No Longer Available
DISCONTINUED
This part number matches the current model number 7289
PartSelect #: PS9391234
Manufacturer #: 7289
No Longer Available
Classic Chest U-Bolt
This part number matches the current model number 7289
PartSelect #: PS12041802
Manufacturer #: 7289
$18.97
In Stock
Stop
This part number matches the current model number 7289
PartSelect #: PS12494096
Manufacturer #: 7289
No Longer Available
Compressor Id:
This part number matches the current model number 7289
PartSelect #: PS18313445
Manufacturer #: 7289
No Longer Available
Common Symptoms of models starting with 7289
[Viewing 8 of 8]Noisy
Fixed by
these parts
these parts
Show All
Marks left on clothes
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Drum Not Spinning
Fixed by
these parts
these parts
Show All
Too hot
Fixed by
these parts
these parts
Show All
Not Heating
Fixed by
these parts
these parts
Show All
Door Pops Open
Fixed by
these parts
these parts
Show All
Won’t Start
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Squealing noise
We followed the instructions for the drum glide replacement and changed the belt and drum support bearing piece, cleaned it out too. Works like a charm. Thanks for saving us a bundle.
Parts Used:
-
Cynthia from Lexington, SC
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Wrench (Adjustable), Wrench set
531 of 553 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loud Squeaking
1. Unplug dryer from outlet
2. Using Lg. flat screwdriver, pry under the front edge of the top and release two spring tabs
3. Lift up top and tilt back out of your way
4. Unscrew two phillips scews on inside of front panel
5. Lift up and out the front panel. Two spring clips at bottom.
6. Rlease tension on drum be ... Read more lt at the motor. Access panel at rear of dryer.
7.Unscrew 3 screws from inside, center rear of drum.
8. Remove drum through the front of the dryer. You may have to spread the sides apart a little bit for it to fit
9. Lift up on the rear drum bearing to remove it from the bearing retainer. ( U shaped plastic socket)
10. unsrew 2 screws and remove the bearing retainer, ground ball. Ball retainer is on outside of dryer.
11. Vacuum everything--duct, blower, lint trap, ect.
12. Intall new bearing retainer and grounding ball, an assistant is helpful at this time, one to hold ball retainer on rear of dryer, one to screw it in from the inside
13. reassemble remainder of parts in reverse order.
2. Using Lg. flat screwdriver, pry under the front edge of the top and release two spring tabs
3. Lift up top and tilt back out of your way
4. Unscrew two phillips scews on inside of front panel
5. Lift up and out the front panel. Two spring clips at bottom.
6. Rlease tension on drum be ... Read more lt at the motor. Access panel at rear of dryer.
7.Unscrew 3 screws from inside, center rear of drum.
8. Remove drum through the front of the dryer. You may have to spread the sides apart a little bit for it to fit
9. Lift up on the rear drum bearing to remove it from the bearing retainer. ( U shaped plastic socket)
10. unsrew 2 screws and remove the bearing retainer, ground ball. Ball retainer is on outside of dryer.
11. Vacuum everything--duct, blower, lint trap, ect.
12. Intall new bearing retainer and grounding ball, an assistant is helpful at this time, one to hold ball retainer on rear of dryer, one to screw it in from the inside
13. reassemble remainder of parts in reverse order.
Read less
Parts Used:
-
Frank from Boyertown, PA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
342 of 367 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Thermal Limiter opened
Unplugged Dryer.
Opened top of Dryer, over the drum.
Removed Thermal Limiter.
Tested the Thermal Limiter - found it was open.
Checked all vents and exhaust tube for lint build-up.
Replaced Thermal Limiter.
Closed top of dryer.
Plugged Dryer back.
Tested Dryer - it works.
Opened top of Dryer, over the drum.
Removed Thermal Limiter.
Tested the Thermal Limiter - found it was open.
Checked all vents and exhaust tube for lint build-up.
Replaced Thermal Limiter.
Closed top of dryer.
Plugged Dryer back.
Tested Dryer - it works.
Parts Used:
-
Stephen from Newnan, GA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
250 of 331 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!