74526 (Type 1) Black and Decker Trimmer - Overview
Sections of the 74526
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".

Trimmer Spring
PartSelect #: PS10167401
Manufacturer #: 243603-00
This spring, often referred to as a recoil spring or spool spring, is sourced from the original manufacturer for use in trimmers. It is located within the spool housing where it is responsible for hol...
$5.15
In Stock
Questions And Answers for 74526
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken power input terminal
I found this unit by the side of the road. One power input terminal was loose. Inside it was broken. Replacement was to remove the screws, pull out the wire, and cut the wire next to the terminal. I was able to strip the wire and crimp it in the terminal. I then soldered both terminals for a good connection.
Parts Used:
-
Curtis from Huntsville, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
6 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!