Back
Back
Keep typing for more specific results...
Models > 7MWGT4027HW1 > Parts

7MWGT4027HW1 Whirlpool Washer Dryer Combo - Parts

1 - 12 of 211
Keep searches simple, eg. "belt" or "pump".
Dryer Thermal Fuse – Part Number: WP3392519
Dryer Thermal Fuse
★★★★★
★★★★★
(372)
PartSelect #: PS11741460
Manufacturer #: WP3392519
The Dryer Thermal Fuse (Thermal Cutoff, Temperature Fuse) is a 2 by ½ inch, white, plastic safety mechanism that stops the flow of electricity to the motor circuit when a dryer overheats. If the fuse ...
$17.95
  In Stock
Agitator Directional Cogs – Part Number: 80040
Agitator Directional Cogs
★★★★★
★★★★★
(395)
PartSelect #: PS388034
Manufacturer #: 80040
This kit is used for replacing the agitator directional cogs (Agitator Dogs, Agitator Repair Kit, Washer Agitator Dogs, Agitator Dog Ears). The agitator is what creates the thrusting motion in your wa...
$7.31
  In Stock
Dryer Internal-Bias Thermostat – Part Number: WP3387134
Dryer Internal-Bias Thermostat
★★★★★
★★★★★
(102)
PartSelect #: PS11741405
Manufacturer #: WP3387134
This thermostat (Dryer Operating Thermostat, Dryer Cycling Thermostat, Cycling Thermostat, Dryer Thermostat) is used to maintain a temperature of 155 degrees in the dryer drum. The internal bias heate...
$27.25
  In Stock
Dryer M-Series Coil Kit – Part Number: 279834
Dryer M-Series Coil Kit
★★★★★
★★★★★
(155)
PartSelect #: PS334310
Manufacturer #: 279834
When the igniter reaches a high enough temperature, these coils (Coil Valve, Dryer Gas Valve Coil Kit, Dryer Valve Coil Kit, Gas Valve Solenoid) work together to open the gas valve and allow the gas t...
$27.28
  In Stock
Dryer Maintenance Kit – Part Number: 4392065
Dryer Maintenance Kit
★★★★★
★★★★★
(341)
PartSelect #: PS373087
Manufacturer #: 4392065
The drum support roller kit (Dryer Repair Kit) allows the dryer to tumble properly by supporting the drum cylinder. The idler pulley provides the tension required for a multi-ribbed belt. The belt att...
$34.58
  In Stock
Dryer Rear Drum Support Roller Kit – Part Number: 349241T
Dryer Rear Drum Support Roller Kit
★★★★★
★★★★★
(143)
PartSelect #: PS347627
Manufacturer #: 349241T
The drum support roller kit allows the dryer to tumble properly by supporting the drum cylinder. The kit includes two drum rollers, four tri-rings, and one palnut (or retaining washer). The kit does n...
$17.78
  In Stock
Dryer Idler Pulley – Part Number: 279640
Dryer Idler Pulley
★★★★★
★★★★★
(132)
PartSelect #: PS334244
Manufacturer #: 279640
This Idler Pulley includes the tri-ring and gasket and everything included here is manufacturer-certified. This part maintains correct tension on the drive belt in order to spin the drum properly. If ...
$25.95
  In Stock
Multi Rib Belt – Part Number: 661570
Multi Rib Belt
★★★★★
★★★★★
(55)
PartSelect #: PS382430
Manufacturer #: 661570
The Drive Belt is a 93 1/2" belt which wraps around the dryer drum to allow tension and movement. If broken the dryer will not turn properly, or there may be loud noises. The part is rated as "medium"...
$24.11
  In Stock
Dryer Igniter Kit – Part Number: 279311
Dryer Igniter Kit
★★★★★
★★★★★
(42)
PartSelect #: PS334180
Manufacturer #: 279311
If your dryer will not heat, takes too long to dry, or does not provide enough heat, you might want to replace your igniter kit. This silicone carbide igniter with ceramic holder kit includes the 3-in...
$35.67
  In Stock
Dryer Tri Ring – Part Number: WPW10512946
Dryer Tri Ring
★★★★★
★★★★★
(5)
PartSelect #: PS11755850
Manufacturer #: WPW10512946
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$10.95
  In Stock
Washer Agitator Cam Kit – Part Number: 285809
Washer Agitator Cam Kit
★★★★★
★★★★★
(55)
PartSelect #: PS334648
Manufacturer #: 285809
This kit included the cam, 4 dogs and bearing.
$13.95
  In Stock
Dryer Radiant Flame Sensor – Part Number: WP338906
Dryer Radiant Flame Sensor
★★★★★
★★★★★
(12)
PartSelect #: PS11741429
Manufacturer #: WP338906
If your gas dryer is not heating up or igniting, then replacing the flame sensor, located in the burner assembly, could solve it. This part senses heat from the igniter to monitor if it is hot enough ...
$34.95
  In Stock
1 - 12 of 211